JBL Tune 525BT
Trådløse hodetelefoner som sitter på øret
Sold from 2023 until now
Getting started with your JBL Tune 525BT
Quick Start Guide & Downloads
Product Specifications
- Driver size (mm)
- 33
- Number of Microphones
- 1
- Driver sensitivity at 1kHz/1mW (dB)
- 102 dB SPL@ 1kHz 1mW
- Impedance (ohms)
- 30
- Dynamic frequency response range (Hz)
- 20 Hz – 20 kHz
- Audio Cable Length (ft)
- 3.9
- Audio Cable Length (m)
- 1.2
- Weight (g)
- 157
- Weight (oz)
- 5.54
- Ear Cup External Height (in)
- 2.9
- Ear Cup External Width (in)
- 2.9
- Ear Cup Internal Height (in)
- 1.2
- Ear Cup Internal Width (in)
- 1.2
- Ear Cup Depth (in)
- 0.7
- Høyde (cm)
- 7.3
- Bredde (cm)
- 7.3
- Indre bredde (cm)
- 3.1
- Indre høyde (cm)
- 3.1
- Dybde (cm)
- 1.8
- Bluetooth version
- 5.3
- Bluetooth profiles
- HFP 1.7.2, AVRCP 1.6.2, A2DP 1.3.2
- Bluetooth frequency
- 2.4 GHz – 2.4835 GHz
- Bluetooth transmitted modulation
- GFSK, π/4-DQPSK, 8-DPSK
- Charging time (hours from empty)
- 2
- Maksimum spilletid (timer)
- 57
- Voice Aware
- Ja
- On-ear
- Ja
- Sammenleggbar
- Ja
- Built-in Microphone
- Ja
- Hands Free Call
- Ja
- JBL Pure Bass Sound
- Ja
- Multi-Point Connection
- Ja
- Speed charge
- Ja
- JBL Headphone App
- Ja
- Charging cable
- Ja
- Bluetooth
- Ja
Trådløse hodetelefoner med JBL Pure Bass-lyd
JBL Tune 525BT hodetelefoner strømmer kraftig JBL Pure Bass-lyd takket være den nyeste 5.3 BT-teknologien. Disse hodetelefonene er brukervennlige og gir deg opp til 57 timer med ren glede, samt 3 timers ekstra batteritid med bare 5 minutters lading. Last ned den gratis JBL-hodetelefonappen og tilpass lyden din via EQ, mens talebeskjed veileder deg gjennom hodetelefonenes funksjoner. Kontroller anrop, lyd og lydvolum fra øreklokken, takket være den praktiske knappekontrollen. Hvis en samtale kommer inn mens du ser en video på en annen enhet, bytter JBL Tune 525BT sømløst over til mobilen din, slik at du aldri går glipp av en samtale. De lette og komfortable JBL Tune 525BT-hodetelefonene kan foldes sammen, slik at de kan følge deg overalt.
FAQs & How-Tos
-
The way you remove and change the ear cushions on your headphones varies from on-ear headphones to over-ear headphones and also from product to product.
When removing and replacing the ear pads you will see the following examples:
Removing on-ear headphones
Pull the ear cushion as you see on the below picture.
The ear cushion will slide out of the hole when you have pulled it enough, which is the case with the picture below.
When the earpad is completely removed it will look like the picture below.
Removing over-ear headphones
Pull the entire earpad off. You need to pull the material that is placed on your ear. Pull carefully so the plastic hooks does not snap off or break. When you have pulled the earpad of it will look like the picture below.
Replacing new on-ear earpads
Align the cushion with the hole all the way around the ear pads.
Replacing new over-ear earpads
Align the plastic hooks which are marked on the left side on the picture below with the holes that are marked on the right side of the picture.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00