JBL Tune 560BT
The JBL TUNE 560BT hodetelefoner lar deg strømme kraftig lyd uten forbehold i opp til 16 timer med rent velbehag. Disse hodetelefonene er enkle å bruke og utstyrt med 32 mm JBL-drivere og JBL Pure Bass-lyd, og gir enkel tilgang til flott lyd hver gang. Og hvis en oppkalling kommer mens du ser på en video på et annet apparat, vil JBL TUNE 560BT sømløst skifte over til din mobil. JBL TUNE 560BT hodetelefoner er Bluetooth-aktivert og utformet for å være komfortabel, og lar deg også koble til Siri eller Google Now uten å bruke mobilen din. JBL TUNE 560BT hodetelefoner er tilgjengelig i 4 friske farger og kan brettes sammen for enkelt å bæres med deg. Hodetelefonene er en «grab ‘n go»-løsning som hjelper deg med å tilføre musikk i alle aspekter av ditt travle liv.
Product Specifications
General Specifications
| Driver size (mm) | 32 |
|---|
Audio Specifications
| Dynamic frequency response range (Hz) | 20Hz – 20kHz |
|---|
Dimension Specifications
| Weight (g) | 155 |
|---|---|
| Weight (oz) | 5.47 |
Control Connect Specifications
| Bluetooth profiles | A2DP v1.2, AVRCP v1.5, HFP v1.6, HSP v1.2 |
|---|---|
| Bluetooth frequency | 2.402 – 2.480GHz |
| Bluetooth transmitted modulation | GSFK, π/4 DQPSK, 8DPSK |
| Bluetooth version | 4.1 |
Documents & Downloads
Gallery
What’s in the Box
- TUNE 560BT
- 1 x ladekabel
- 1 x sikkerhetsdatablad
- 1 x sikkerhetsdatablad/QSG
FAQs & How-Tos
Pairing issues with a Computer or PC
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).
The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:
• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
Always get the latest driver version available for your Computer/PC/Laptop.
To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.
The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:
• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
Always get the latest driver version available for your Computer/PC/Laptop.
To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.
Was this helpful?
Thank you for your feedback!
How to avoid Bluetooth Interference or Interruptions
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
Was this helpful?
Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00