JBL JR 460NC
Trådløse øredekkende hodetelefoner med støyreduksjon for barn
Getting started with your JBL JR 460NC
Documents & Downloads
Product Specifications
- Weight (g)
- 200
- Driver size (mm)
- 32
- Number of Microphones
- 3
- Driver sensitivity at 1kHz/1mW (dB)
- 92 dB SPL@1 kHz / 1 mW
- Dynamic frequency response range (Hz)
- 20 Hz – 20 kHz
- Impedance (ohms)
- 32
- Dybde (cm)
- 2.3
- Ear Cup Depth (in)
- 0.9
- Høyde (cm)
- 9.1
- Ear Cup External Height (in)
- 3.6
- Bredde (cm)
- 7.7
- Ear Cup External Width (in)
- 3
- Indre bredde (cm)
- 5.4
- Ear Cup Internal Height (in)
- 2.1
- Indre høyde (cm)
- 3.8
- Ear Cup Internal Width (in)
- 1.5
- Hodetelefonens kabellengde (m)
- 0.2
- Headphone Cable Length (ft)
- 0.7
- Bluetooth profiles
- HFP 1.6 AVRCP 1.5 A2DP 1.3
- Bluetooth frequency
- 2.4 GHz - 2.4835 GHz
- Bluetooth transmitted modulation
- GFSK, π/4 DQPSK, 8DPSK
- Bluetooth version
- 5.0
- Charging time (hours from empty)
- 2
- Maximum music play time with ANC off (hours)
- 30
- Maximum music play time with ANC on (hours)
- 20
- Maksimum spilletid (timer)
- 30
- Audio cable
- Ja
- Charging cable
- Ja
- Active Noise Cancelling
- Ja
- Built-in Microphone
- Ja
- Multi-Point Connection
- Ja
- Over-øret
- Ja
- Rechargable battery
- Ja
- Wireless
- Ja
JBL Safe Sound, støyfritt.
Uansett om du er på farten eller lærer hjemme, kan du gi barnet ditt flott JBL Safe Sound. Hodetelefonene er finjustert for barns ører og hoder, og er komfortable og enkle å bruke for selv de minste barna. Lær, lek og utforsk på en trygg måte, med mindre enn 85 dB volum og barnevennlige, trygge materialer som ikke skader eller går i stykker. Opptil 20 timers batterilevetid betyr langvarig moro for hele uken, og du kan lade opp på bare to timer. Aktiv støykansellering holder barna fokusert, og en innebygd mikrofon lar dem enkelt chatte med venner og lærere. Det er aldri for tidlig å sette pris på sikker JBL-lyd: Lydkvalitet har ingen alder.
FAQs & How-Tos
-
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback! -
1. First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.
2. "Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with your product.
3. Try to restart the source device (Smartphone/tablet/PC) by powering it off and on again and after restarting, try to establish a Bluetooth connection to your product.
4. If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.
5. Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.
6. Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.
You should now have a successful pairing with your device. If you are still experiencing issues, please contact us again.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+47 21 93 29 30
Monday - Friday: 09.00-17.00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00