UA Sport Wireless Train – Engineered by JBL
Trådløse hodetelefoner utviklet for trening
Sold from 2018 until now
Getting started with your UA Sport Wireless Train – Engineered by JBL
Documents & Downloads
Product Specifications
- Driver size (mm)
- 40
- Ear cushion material
- UA breathe material
- Driver sensitivity at 1kHz/1mW (dB)
- 101
- Dynamic frequency response range (Hz)
- 16Hz - 20kHz
- Impedance (ohms)
- 32
- Number of drivers per ear
- 1
- Headphone cable length (cm)
- 125.0
- Headphone cable length (ft)
- 4.1
- Weight (g)
- 240.0
- Weight (oz)
- 8.5
- Bluetooth profiles
- A2DP v1.3, AVRCP v1.5, HFP v1.6, HSP v1.2
- Bluetooth frequency
- 2.402GHz-2.48GHz
- Bluetooth transmitted modulation
- GFSK,π/4DQPSK, 8DPSK
- Bluetooth version
- 4.1
- Charging time (hours from empty)
- 2
- Maximum music play time with ANC off (hours)
- 16
- Maksimum spilletid (timer)
- 16
- Maximum talk time (hours)
- 16
- Bluetooth
- Ja
- Ambient Aware
- Ja
- Built-in Microphone
- Ja
- Carrying case
- Ja
- Detachable Cable
- Ja
- Flat-fold design
- Ja
- Hands Free Call
- Ja
- JBL Charged Sound
- Ja
- On-ear
- Ja
- Rechargable battery
- Ja
- Remote control on ear cups?
- Ja
- Siri/ Google Now
- Ja
- Speed charge
- Ja
- Sweat Proof
- Ja
- TalkThru
- Ja
- Wireless
- Ja
Bygget slitesterk for å tåle alt.Bygget slitesterk for å tåle alt.
UA Sport Wireless Train er utviklet for trening. SuperVent-øreputene holder dem kjølige og tørre, og grepmateriale fra Under Armour gir myk følelse og maksimal stabilitet. UA Train-hodetelefonene gir ekstra kraft til hver repetisjon med stor, trådløs lyd drevet av JBL. Med et enkelt trykk på UA-logoen slås TalkThru-teknologien på så du kan snakke med treningspartneren eller treneren din uten å måtte ta av hodetelefonene. De ekstra store kontrollene gir enkel tilgang ved intens trening, og 16 timers batterilevetid med Speed Charge gir en hel times avspilling for bare fem minutters lading. De er testet og utviklet av idrettsfolk for varighet, og de er fuktbestandige med øreputer som kan håndvaskes. Med UA Sport Wireless Train kan du få best mulig utbytte fra treningsøktene.
FAQs & How-Tos
-
UA Train features an IPX4 rating which offers protection from a splash of water in any direction for at least 5 minutes. They cannot be fully submerged in water.Was this helpful? Thank you for your feedback!
-
Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up for 2-3 seconds and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.Was this helpful? Thank you for your feedback!
-
Yes. The UA Train features a detachable audio cable with a one button remote. (Please note: you cannot use bluetooth or TalkThru when using the cable connection.)Was this helpful? Thank you for your feedback!
-
No. UA Train does not support AptX™ and AptX HD™ audio codecs.Was this helpful? Thank you for your feedback!
-
As the headphones are charging, you will see a red solid light indicator at the bottom LEFT ear cup. Once the unit is fully charged, the red light will turn off.Was this helpful? Thank you for your feedback!
-
Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up for 2-3 seconds and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.Was this helpful? Thank you for your feedback!
-
Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up for 2-3 seconds and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a solid blue light above the power button.Was this helpful? Thank you for your feedback!
-
To receive a call, press the center button located in between the volume- and volume+ button for 1 second.Was this helpful? Thank you for your feedback!
-
To use the headphones, they cannot be charging. You should receive 16 hours of battery life. The UA Train also features the quick charge battery which allows you to receive 1 hour of battery life after charging for 5 min.Was this helpful? Thank you for your feedback!
-
Yes, The UA Train ear cushions can be removed and washed. To remove the ear cushions, peel cushion away from ear cup center. Hand wash the ear cushions only with liquid soap for 5 minutes. Swish in soapy water, then swish through clean water until there are no more soap suds. Wait for ear cushions to fully dry, and gently stretch the cushion, inserting the cushion ring into the ear cup slot, and working your way around. Rotate until the L or R indicator is in the correct position.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+47 21 93 29 30
Monday - Friday: 09.00-17.00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00