JBL Endurance JUMP

JBL Endurance JUMP

Vanntette trådløse In-Ear sportsøreplugger

Sold from 2018 until now

Getting started with your JBL Endurance JUMP

Getting started with your JBL Endurance JUMP

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Driver size (mm)
Driver sensitivity at 1kHz/1mW (dB)
Dynamic frequency response range (Hz)
Impedance (ohms)
Number of drivers per ear
Bluetooth version
Bluetooth profiles
HFP v1.6, A2DP v1.3, AVRCP v1.5
Bluetooth frequency
Bluetooth transmitted modulation
Charging time (hours from empty)
Maximum music play time with ANC off (hours)
Maximum talk time (hours)
Maksimum spilletid (timer)
IP Code
Siri/ Google Now
Built-in Microphone
Hands Free Call
Secure Fit
Touch Control
Speed charge
Rechargable battery

Aldri vondt. Faller ikke ut

JBL Endurance JUMP-ørepluggene er din treningspartner som tar treningsøktene dine til nye høyder. Garantert å aldri gjøre vondt eller falle ut; disse ørepluggene lar deg slå på energien på et blunk. Ta på deg de PowerHook™-designede ørepluggene, og de skrur seg automatisk på. Beveg deg med selvtillit med en trådløs nakkebøyle og TwistLock™-øreplugger. Hold ut i all slags vær med IPX7-vanntetthet og åtte timers batterilevetid. Og hvis det ikke er nok, er du klar til enda mer på kun få minutter, takket være det praktiske hurtigladingsbatteriet.

Bluetooth-tilkobling lar deg strømme høykvalitetsmusikk i hele åtte timer uten knotete ledninger som kommer i veien for treningen. Ti minutters lading gir én times avspilling.
Sikker Ear Hook-design som automatisk slår ørepluggene av og på når de tas av eller på
Takket være TwistLock™ og FlexSoft™-teknologi er disse ørepluggene både lette og ergonomisk utviklet for å sikre komfort og stabilitet, uansett treningsform.
Med IPX7-vanntetthet er JBL Endurance JUMP utviklet for bruk alle typer værforhold. Holdbare og laget for å vare i alle elementer.
Lar deg enkelt styre musikk og samtaler gjennom kontroller for avspilling, pause, volum og sangrekkefølge med et enkelt trykk, slik at du kan fortsette med det du gjør.
Bluetooth®-teknologi muliggjør håndfri-samtaler slik at du kan fokusere på treningen din.
Holdbar bæreveske i silikon.

FAQs & How-Tos

12 results
  • This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.
  • The headphones can pair to multiple devices but can only be connected to one device at a time.
  • The JBL Endurance SPRINT, JUMP and DIVE can be used in salt water (i.e. sea) but we recommend to thoroughly wash the headphones in fresh water after every use in salt water, to remove the salt residue. Please note that only DIVE can actually be used in water, because it features a function lock and a built-in memory for MP3 music files. SPRINT and JUMP cannot be used in water, because the touch buttons will malfunction when submerged, and Bluetooth cannot function at all under water.
  • Because bluetooth cannot travel through water, the only Endurance model that is used for swimming is the Endurance DIVE model. The Endurance DIVE model features an MP3 player which allows you to listen to music under water without using bluetooth. Furthermore, only DIVE features a function lock, which prevents water from activating functions inadvertently. SPRINT and JUMP do not have this lock function, and will not work under water.
  • If connecting for the first time, the headphone will enter pairing mode automatically after it is powered on. To turn the headphones on, simply spread apart the RIGHT power hook from the cord. You will see solid red LED and then it will flash blue as it begins to search for a device to connect to. The Endurance headphone should pop up on your discoverable devices within a few seconds and you should be connected! If you wish to turn off the headphones, remove them from your ear and allow the RIGHT power hook and cord to close together. This is magnetized, so they should close together with ease.
  • To pause/play press the "L" on the JBL logo located on the RIGHT ear for 1 second. If you want to skip the track forward, press the "L" on the JBL logo on the RIGHT ear hook for 2 seconds. To skip tracks backward, press the "L" on the JBL logo on the RIGHT ear hook for 3-4 seconds.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • To pair to a different device, double tap and hold your finger on the JBL logo for 5 seconds until you see the LED light flash blue. Make sure that the device you are trying to connect to is in range and in pairing mode. You should see the Endurance headphone pop up on your discoverable devices within a few seconds and the flashing LED light should now be a solid blue.
  • For all models except Endurance Peak:
    Press the headphone touch control located on the RIGHT ear loop for 15 seconds while the headphones are being charged.
    Note that resetting the Dive will not erase music contained in the MP3 memory.

    Endurance Peak reset: While the pods are being charged, tap the touch pad on the right pod once, then tap again and hold for approx 18 seconds, or until the LED blinks.

  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
< 1 2 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +47 21 93 29 30

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00


WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00