JBL Endurance RUNBT
Product Specifications
General Specifications
| Sensitivitet | 102dB SPL@1kHz/1mW |
|---|---|
| Dynamisk frekvensresponsområde | 20Hz-20kHz |
| Maksimal SPL | 15mW |
| Impedans | 16 ohm |
Audio Specifications
| Driver sensitivity at 1kHz/1mW (dB) | 102 dB |
|---|---|
| Dynamic frequency response range (Hz) | 20 Hz - 20 kHz |
| Impedance (ohms) | 16 ohm |
Dimension Specifications
| Headphone cable length (cm) | 62 |
|---|---|
| Headphone cable length (ft) | 2.03 |
| Weight (g) | 19.7 |
| Weight (oz) | 0.69 |
Control Connect Specifications
| Bluetooth profiles | A2DP V1.2, AVRCP V1.5, HFP V1.5, HSP V1.2 |
|---|---|
| Bluetooth frequency | 2.402 GHz - 2.48 GHz |
| Bluetooth transmitted modulation | GFSK, π/4 DQPSK and 8DPSK |
Documents & Downloads
Gallery
Videos
What’s in the Box
- 1 x ENDURANCE RUNBT
- 3 størrelser øreplugger
- 1 x Forbedrer
- 1 ladekabel
- 1 x garanti/advarsel (g / !)
- 1 x hurtigstartveiledning/sikkerhetsdatablad (s / i)
FAQs & How-Tos
There are several easy ways to prevent damage to your headphones, and please follow the steps below.
-
If the USB port has a cover, please always have it covered, except when charging.
-
Always be sure the USB port and connector are dry before connecting to charge.
-
Do not allow any oils, stains, sweat, or corrosive materials to contact the charging port. It will eventually damage the port.
-
Do not damage or block the USB port. For example, do not force it in if you have trouble inserting the USB connector into the port. Instead, examine the port and remove foreign substances that might be inside or blocking the port.
The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:
• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
Always get the latest driver version available for your Computer/PC/Laptop.
To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00