JBL Reflect Mini NC

JBL Reflect Mini NC

Vanntette, helt trådløse NC ørepropper

Sold from 2020 until now

Getting started with your JBL Reflect Mini NC

Getting started with your JBL Reflect Mini NC

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Driver size (mm)
6
Driver sensitivity at 1kHz/1mW (dB)
97
Dynamic frequency response range (Hz)
20 Hz – 20 kHz
Impedance (ohms)
16
Number of drivers per ear
1
Lade-etuiets vekt (g)
46
Charging Case Weight (oz)
1.6
Øreproppens vekt (g)
13.5
Earpiece Weight (oz)
0.5
Bluetooth profiles
A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth frequency
2.4 GHz – 2.4835 GHz
Bluetooth transmitted modulation
GFSK, π/4DQPSK, 8DPSK
Bluetooth version
5.1
Charging case battery life (max hours)
14
Charging time (hours from empty)
2
Maximum music play time with ANC on (hours)
6
Maksimum spilletid (timer)
7
Alexa
Ja
Active Noise Cancelling
Ja
Built-in Microphone
Ja
Charging case
Ja
Google Assistant
Ja
Hands Free Call
Ja
In-ear
Ja
JBL Signature Sound
Ja
Rechargable battery
Ja
True Wireless
Ja
Waterproof
Ja
Wireless
Ja
IP Code
IP67

Designet for bevegelse – definert av deg

Om du driver med yoga, jogging eller barre-trening, er JBL Reflect Mini NC sportsøreplugger det perfekte tilbehøret for din sportslige livsstil. Med aktiv støyreduksjon kan du fokusere på treningsmålet ditt uten distraksjoner, mens Smart Ambient-teknologien gjør at du er årvåken overfor omgivelsene, eller du kan chatte med en venn. Hver av ørepluggene kobles raskt til og uavhengig av hverandre, slik at du kan svare på anrop med hver enkelt øreplugg og tilordne unike funksjoner til venstre og høyre. Med 21 timers spilletid, ulike fargevalg med reflekterende effekter og IPX7-klassifisering for vanntetthet, er dette de ultimate trådløse øreproppene

Med den lange batterilevetiden kan du spille mye lenger eller presse deg selv mye hardere, uten å måtte stoppe opp for å lade.
Steng ute det du ikke ønsker, eller hør mer av det du hører på. Med Smart Ambient-teknologien kan du jogge trygt på gaten eller holde kontakten med venner under treningen.
Velg mellom tre forskjellige ørefinner for å få en perfekt, stabil og komfortabel passform.
Overlegen lyd både innendørs og utendørs gir deg riktig fokus og motivasjon for enhver situasjon, enten du er innendørs eller ute etter naturen.
Gjør det enkelt. Du er aldri mer enn et ord fra Hey Google eller Amazon Alexa, som er der for å gjøre alt du ønsker å gjøre en lek. (*) Kun støttet på Android. (**) Android 6.0 eller nyere kreves for full tilgang til Alexa-funksjoner når du bruker denne enheten.
Ikke vær redd for å være litt tøff. Takket være IP67-sertifiseringen er JBL Mini NC ikke bare svette og vannsikker, men også ekstremt slitesterke slik at de tåler selv de hardeste treningsøktene og værforholdene. Du kan til og med gjør dem rene etter bruk. Med den reflekterende JBL-logoen og et bredt utvalg av farger, kan du samtidig være både stilig og godt synlig.
Det spiller ingen rolle hvilken øreplugg du tar ut av etuiet først. Du kan svare på anrop, justere volumet eller bruke taleassistenten på hvert av ørene, slik at du kan holde deg fleksibel og aldri blir unødig forstyrret.
Ørepluggene dine har det. Venstre og høyre mikrofon fanger deg opp i stereo under telefonsamtaler. Ta dem ut, og de setter musikken på pause. Du trenger ikke engang tenke på det.
My JBL Headphones Få bedre kontroll og tilpasning av lytteopplevelsen med denne gratisappen.

FAQs & How-Tos

11 results
  • Visit the App Store and download the ‘Amazon Alexa’ App.

      Set up Amazon Alexa #1.png
    1. Click the Plus(+) button on the top right of the screen.
    2. Then select ‘Add Device‘.
    3. Select headphones from the list and then choose your Headphones from the list of available devices.
    4. Follow the rest of the instructions in the Alexa App to complete the setup.
  • If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #5.png
    Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
    Set up Google Assistant #3.png
    Set up Google Assistant #4.png
  • Visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #1.png
    Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
      Set up Google Assistant #3.png
    Set up Google Assistant #4.png
  • Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). 
    This restores the earbuds to the factory defaults.
    TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
    It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • To perform a hardware reset of your earbuds, press and hold the reset button on the charging case* for more than 5 seconds. This resets the earbuds without restoring the settings to the factory defaults.
    * Location
    Live 300TWS/Live Pro+ TWS: Inside the charging case between the earbuds.
    Live Free NC+/Reflect Mini NC TWS/Reflect Aero: On the back of the charging case, next to the USB-C port.
    Club Pro+ TWS: On the bottom of the charging case, next to the USB-C port.
  • The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.

    Switching between voice assistant #1.png

    You can change the default assistant in the ‘My JBL Headphones’ app:
    1. Open the My JBL Headphones app on your device.
    2. Select the headphones you are connected too.
    3. Go to Settings by clicking the symbol in the top right corner.
    4. Select Voice Assistant.
    5. Now you can select your preferred voice assistant.
    Switching between voice assistant #2.png

    Your headphones may restart after switching Voice Assistant.
  • 1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).
  • After setting up Amazon Alexa on your headphones through the My JBL Headphones app, use Amazon Alexa by pressing & holding the touch panel for 2 seconds on the earbud that you have enabled the voice assistant feature on.
      Trigger Alexa #2 FAQ.png

    Things to try
    • “What’s the weather?”
    • Play Niall Horan
    • Play NPR on iHeartRadio
    • Set a timer for 5 minutes
    • What new skills do you have?
    Stop Alexa when she talks
    While Alexa is talking, press and release the Action button then say “Stop”.

    For more information and things to try with Alexa, visit: www.amazon.com/alexadevices
  • After setting up Google Assistant on your headphones through the My JBL Headphones app, use Google Assistant by pressing & holding the touch panel for 2 seconds on the earbud that you enabled the voice assistant feature on.
    Trigger Google - #1 FAQ.png
    Press and hold the Action button to begin. Requires pairing with eligible phone and internet connection. For examples of questions and things you can do, visit: https://assistant.google.com/platforms/phones/#headphones

    Get your notifications
    Double-tap the Action button.

    Stop your Google Assistant
    Touch the Action button.

    Reply to the message (where available)
    After receiving a message notification, touch and hold the Action button to respond. When you’re done, release the button.

    For more information on what your Google Assistant can do, visit: https://assistant.google.com/platforms/headphones

     
  • If the earbuds go into standby mode and turn off, you can still use them without putting them back into the charging case. 
    You can reactivate the headphones by pressing or touching the outside earbud itself.
    Please note: They will be automatically powered off after 30 minutes of being in standby mode if they disconnect from Bluetooth. To reconnect, you will need to put the earbuds back in the charging case and take them off again. 

    It is possible to change the standby mode time with your headphones. To do this, go into the My JBL Headphones app and choose the S
    tandby Time via Auto-off function. You can adjust the time to 15min, 1hr, etc., or you can choose “Never” if you want to keep the earbuds turn on at all times. Once you set the Auto-off, the earbuds will work according to the setting whether they connect to Bluetooth or disconnect.
     

< 1 2 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +47 21 93 29 30

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00