JBL Live Pro 2 TWS
Ekte trådløse og støydempende ørepropper
Getting started with your JBL Live Pro 2 TWS
Documents & Downloads
- Driver size (mm)
- Number of Microphones
- Driver sensitivity at 1kHz/1mW (dB)
- Dynamic frequency response range (Hz)
- 20 Hz - 20 kHz
- Impedance (ohms)
- 11 mm dynamisk driver
- 4,8 g per enhet 9,6 g kombinert)
- 48,4 g
- Bluetooth version
- Bluetooth profiles
- A2DP V1.3, AVRCP V1.6, HFP V1.7
- Bluetooth frequency
- 2.4 GHz - 2.4835 GHz
- Bluetooth transmitted modulation
- GFSK, π/4 QPSK, 8DPSK
- Charging time (hours from empty)
- Maximum music play time with ANC off (hours)
- Maksimum spilletid (timer)
- IP Code
- True Adapte Noice Cancelling
- Charging cable
- Voice Assistant integration
- Ambient Aware
- Built-in Microphone
- Hands Free Call
- JBL Signature Sound
- Multi-Point Connection
- Touch Control
- True Wireless
- Adaptive Noise Cancelling
- Active Noise Cancelling
- Water Resistant
- Charging case
- Speed charge
- Rechargable battery
Lytt og bli hørt. Hele dagen, overalt.
Hold deg på sporet hele dagen med stilige følgesvenner for arbeid og lek. JBL Live Pro 2 ørepropper leverer opptil 40 timer med utrolig JBLSignature Sound (med 10 timer i øreproppene pluss 30 timer i etuiet), hurtiglading og QI-kompatibel trådløs lading for de gangene batteriene trenger litt ekstra. Adaptiv støydemping fjerner distraksjoner for å gi deg fullstendig oppslukende lyd, mens smart omgivelsestilpasning holder deg oppmerksom på omgivelsene. Det lukkede designet med ovale kanaler sikrer bedre støydemping og forbedret lydkvalitet for de som foretrekker en renere estetikk. Har du noe å si? Ha klare perfekte samtaler med seks stråleformende mikrofoner eller få tilgang tilgang til din foretrukne stemmeassistent for sømløs håndfri kontroll og tilkobling uansett hvor dine eventyr tar deg.
FAQs & How-Tos
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices.Was this helpful? Thank you for your feedback!
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback!
The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.
You can change the default assistant in the ‘My JBL Headphones’ app:
- Open the My JBL Headphones app on your device.
- Select the headphones you are connected too.
- Go to Settings by clicking the symbol in the top right corner.
- Select Voice Assistant.
- Now you can select your preferred voice assistant.
Your headphones may restart after switching Voice Assistant.Was this helpful? Thank you for your feedback!
After setting up Amazon Alexa on your headphones through the My JBL Headphones app, use Amazon Alexa by pressing & holding the touch panel for 2 seconds on the earbud that you have enabled the voice assistant feature on.
Things to try
- “What’s the weather?”
- Play Niall Horan
- Play NPR on iHeartRadio
- Set a timer for 5 minutes
- What new skills do you have?
While Alexa is talking, press and release the Action button then say “Stop”.
For more information and things to try with Alexa, visit: www.amazon.com/alexadevicesWas this helpful? Thank you for your feedback!
After setting up Google Assistant on your headphones through the My JBL Headphones app, use Google Assistant by pressing & holding the touch panel for 2 seconds on the earbud that you enabled the voice assistant feature on.
Press and hold the Action button to begin. Requires pairing with eligible phone and internet connection. For examples of questions and things you can do, visit: https://assistant.google.com/platforms/phones/#headphones
Get your notifications
Double-tap the Action button.
Stop your Google Assistant
Touch the Action button.
Reply to the message (where available)
After receiving a message notification, touch and hold the Action button to respond. When you’re done, release the button.
For more information on what your Google Assistant can do, visit: https://assistant.google.com/platforms/headphones
Was this helpful? Thank you for your feedback!
First, ensure that you have the Google Assistant or Amazon Alexa apps installed on your device, depending on the voice assistant you want to use. Go to your app store to download the intended voice assistant app, then add your headphones as a device in the app if necessary. Finally, enable the intended voice assistant in the settings of the My JBL Headphones app and assign which earbud you want to use to control it. The voice assistant app must be open for it to work correctly. It can be opened from within the My JBL Headphones app by tapping the name of the required voice assistant after you have selected it for use and assigned a gesture to one of your earbuds to control it.Was this helpful? Thank you for your feedback!
If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.
https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1Was this helpful? Thank you for your feedback!