JBL Live Free NC+ TWS

JBL Live Free NC+ TWS

Helt trådløse NC-ørepropper

Sold from 2020 until now

Getting started with your JBL Live Free NC+ TWS

Getting started with your JBL Live Free NC+ TWS

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Driver size (mm)
6.8
Driver sensitivity at 1kHz/1mW (dB)
96
Dynamic frequency response range (Hz)
20 Hz – 20 kHz
Impedance (ohms)
16
Number of drivers per ear
1
Lade-etuiets vekt (g)
40
Charging Case Weight (oz)
1.4
Øreproppens vekt (g)
14
Earpiece Weight (oz)
0.5
Bluetooth profiles
A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth frequency
2.4 GHz – 2.4835 GHz
Bluetooth transmitted modulation
GFSK, π/4DQPSK, 8DPSK
Bluetooth version
5.1
Charging time (hours from empty)
2
Maximum music play time with ANC off (hours)
7
Maximum music play time with ANC on (hours)
6
Maksimum spilletid (timer)
7
Bluetooth
Ja
Voice Assistant integration
Ja
Active Noise Cancelling
Ja
Ambient Aware
Ja
Built-in Microphone
Ja
Charging case
Ja
Hands Free Call
Ja
JBL Signature Sound
Ja
Rechargable battery
Ja
Secure Fit
Ja
Sweat Proof
Ja
TalkThru
Ja
Touch Control
Ja
True Wireless
Ja
Waterproof
Ja
Wireless
Ja
IP Code
IPX7

Lev uten distraksjoner

Ta med deg verden, og gjør det med stil. JBL Live Free NC+ TWS-hodetelefoner gir JBL Signature Sound med overlegen komfort. Få godstemning hele dagen uten støy eller forstyrrelser takket være aktiv støyreduksjon, mens TalkThru og Ambient Aware holder deg i kontakt med venner og omgivelser. Opptil 21 timer batterilevetid og trådløs lading i etuiet gir deg sømløs, praktisk brukervennlighet, og Dual Connect + Sync betyr at du kan begynne å lytte umiddelbart med en øretelefon eller begge. Du trenger aldri å stoppe musikken – du har valg av taleassistent, perfekte samtaler og intuitive kontroller rett ved fingertuppene. JBL Live Free NC+ TWS er vann og svettesikker, og vil ikke skuffe deg uansett hva du gjør eller hvordan været er. Så du kan leve og være fri.

Gjør de vanlige, ekstraordinære 6,8 mm dynamiske driverne til førsteklasses gjengivere av JBL Signature Sound. Disse hodetelefonene kan være små, men de leverer skikkelig kraft.
Ingen støy og null distraksjoner med aktiv støyreduksjon, slik at du kan nyte rytmen. Hvis du skal chatte, kan TalkThru og Ambient Aware tillate naturlige samtaler og total bevissthet rundt omgivelsene, uten å ta ørepluggene ut.
Dual Connect + Sync kobler automatisk til enheten din så snart du åpner esken, uansett hvilken ørepropp du tar først. Og du kan forlenge batterilevetiden ved å bytte ut hver ørepropp for å lade individuelt. Takket være Fast Pair aktivert av Google, kobles JBL Live Free NC+ TWS til Android-enheten din så snart du åpner etuiet. Du kan også pare flere enheter ved å trykke på enhetens skjerm.
Ingen ønsker å være uten musikken. Med JBL Live Free NC+ TWS kan du lade på farten med Speed Charge og Qi-kompatibel trådløs lading. Det er opptil 7 timer med musikkavspilling og opptil 14 timer i etuiet. Fortsett å spille lenger.
Full kontroll over lyden er bare en fingertupp unna. Du har all kraften i øreproppene dine. Administrer telefonsamtaler med fingertuppen og nyt perfekte samtaler fra den integrerte dual-mic løsningen på hver av proppene. Dedikert berøringskontroll lar deg også snakke sømløst med Google eller aktivere Amazon Alexa. (*) Kun støttet på Android. (**) Android 6.0 eller nyere kreves for full tilgang til Alexa-funksjoner når du bruker denne enheten.
Ikke svett over de små tingene, JBL Live Free NC+ TWS er vann og svettesikker, med IPX7-sertifisering. De vil holde deg i form i regn eller sol
Med tre størrelser på ørepropper og to geltuppstørrelser kan du enkelt tilpasse øreproppene dine for å få en perfekt passform, som holder seg på plass under selv din vanskeligste treningsøkt.

FAQs & How-Tos

18 results
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all True Wireless Stereo earphones and cases.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • Visit the App Store and download the ‘Amazon Alexa’ App.

      Set up Amazon Alexa #1.png
    1. Click the Plus(+) button on the top right of the screen.
    2. Then select ‘Add Device‘.
    3. Select headphones from the list and then choose your Headphones from the list of available devices.
    4. Follow the rest of the instructions in the Alexa App to complete the setup.
  • If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #5.png
    Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
    Set up Google Assistant #3.png
    Set up Google Assistant #4.png
  • Visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #1.png
    Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
      Set up Google Assistant #3.png
    Set up Google Assistant #4.png
  • Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). 
    This restores the earbuds to the factory defaults.
    TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
    It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • To perform a hardware reset of your earbuds, press and hold the reset button on the charging case* for more than 5 seconds. This resets the earbuds without restoring the settings to the factory defaults.
    * Location
    Live 300TWS/Live Pro+ TWS: Inside the charging case between the earbuds.
    Live Free NC+/Reflect Mini NC TWS/Reflect Aero: On the back of the charging case, next to the USB-C port.
    Club Pro+ TWS: On the bottom of the charging case, next to the USB-C port.
  • The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.

    Switching between voice assistant #1.png

    You can change the default assistant in the ‘My JBL Headphones’ app:
    1. Open the My JBL Headphones app on your device.
    2. Select the headphones you are connected too.
    3. Go to Settings by clicking the symbol in the top right corner.
    4. Select Voice Assistant.
    5. Now you can select your preferred voice assistant.
    Switching between voice assistant #2.png

    Your headphones may restart after switching Voice Assistant.
  • 1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).
< 1 2 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +47 21 93 29 30

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00