JBL Endurance Race TWS

JBL Endurance Race TWS

Vanntette, helt trådløse og aktive sportsørepropper

Sold from 2022 until now

Getting started with your JBL Endurance Race TWS

Getting started with your JBL Endurance Race TWS

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Driver size (mm)
6
Number of Microphones
2
Driver sensitivity at 1kHz/1mW (dB)
99
Dynamic frequency response range (Hz)
20 Hz - 20 kHz
Impedance (ohms)
16
Number of drivers per ear
1
Lade-etuiets vekt (g)
44.9
Charging Case Weight (oz)
1.6
Øreproppens vekt (g)
12.4
Earpiece Weight (oz)
0.4
Bluetooth profiles
A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth frequency
2.4 GHz - 2.4835 GHz
Bluetooth transmitted modulation
GFSK, π/4QPSK, 8DPSK
Bluetooth version
5.2
Charging time (hours from empty)
2
Maksimum spilletid (timer)
30
Ambient Aware
Ja
Bluetooth
Ja
Charging cable
Ja
TalkThru
Ja
Voice Assistant integration
Ja
Built-in Microphone
Ja
Charging case
Ja
Hands Free Call
Ja
JBL Pure Bass Sound
Ja
Rechargable battery
Ja
Secure Fit
Ja
Speed charge
Ja
Sweat Proof
Ja
True Wireless
Ja
Twistlock
Ja
Waterproof
Ja
Wireless
Ja
IP Code
IP67

Slitesterkt, perfekt design for å passe ditt aktive liv

JBL Endurance Race ekte trådløse, aktive ørepropper er alltid klare til bruk. Med 30 timers batterilevetid og en vanntett, støvtett design, holder de deg gående med JBL Pure Bass og komfort som varer hele dagen. Den robuste, overlegne passformen lar deg holde deg aktiv fra stranden til styrerommet med bedre forsegling og stabilitet. Få hjelp fra din foretrukne taleassistent, styr lyden din og foreta perfekte anrop med et knappetrykk. Eller, når du trenger å høre omgivelsene dine, kan du stille inn lyd fra verden rundt deg med forbedret omgivelseslyd.

Med dristig lyd og rik bass fra en 6 mm dynamisk driver vil du ikke bare høre musikken – du vil føle den.
Gå aldri glipp av en tone med 10 timers batterilevetid fra øreproppene og 20 timer fra etuiet. Trenger du en boost? Kun 10 minutters hurtiglading gir deg enda en hel time spilletid.
Den ergonomiske vingeforsterkeren til JBLs Endurance Race bruker Twistlock™-teknologi for å lindre ubehag på trykkpunkter, noe som gir deg bedre forsegling og stabilitet med en overlegen passform hele dagen.
Den robuste IP67-sertifiserte støv- og vanntette designen til JBL Endurance Race TWS-ørepropper gir deg friheten til å holde deg aktiv og energisk fra stranden til styrerommet. Helt støvtette, og de kan tåle nedsenking i vann på opptil 1 m.
Ambient Aware holder deg oppmerksom på omgivelsene dine uansett hvor musikken tar deg. Og når det er på tide med en prat, kan du aktivere TalkThru for å ta del i samtaler uten å måtte ta ut øreproppene dine.
Utfør perfekte stereoanrop med dobbel stråledannende mikrofon. Eller få tilgang til din foretrukne taleassistent direkte fra hodetelefonene dine med trykkontroller som holder verden lett tilgjengelig. (*) Kun støttet på Android. (**) Android 6.0 eller nyere kreves for full tilgang til Alexa-funksjoner når du bruker denne enheten.
Tilpass lytteopplevelsen din. Den dedikerte appen lar deg optimalisere innstillinger, velge stemmeassistenten din, justere EQ-nivåer og mer, slik at du alltid kan høre musikken på din måte.

FAQs & How-Tos

7 results
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all True Wireless Stereo earphones and cases.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • There are several easy ways to prevent damage to your headphones, and please follow the steps below.

    1. If the USB port has a cover, please always have it covered, except when charging.

    2. Always be sure the USB port and connector are dry before connecting to charge.

    3. Do not allow any oils, stains, sweat, or corrosive materials to contact the charging port. It will eventually damage the port.

    4. Do not damage or block the USB port. For example, do not force it in if you have trouble inserting the USB connector into the port. Instead, examine the port and remove foreign substances that might be inside or blocking the port.

    If you need more assistance, please contact the Customer Service team.
     
  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • This product is rated IP67, which is different from IPX7. IP67 protects the product from submersion in 1 meter (3.3 feet) of water for up to 30 minutes. It is also resistant against dust. Dust accumulation around electronics can lead to hardware failure, so the IP67 rating is an extremely beneficial addition to this product. 
  • The two earpieces of your TWS headphones should normally be connected together without issue.  However, if they are no longer paired to each other, please follow these steps, in order.
    1. Forget/unpair the headphones on your device.
    2. Manually pair the two earpieces together following the "Manual Pairing Left & Right" instructions in your Owner's Manual/Quick Start Guide.
    3. Pair the headphones to your device and see if this resolves the problem.
    4. If manual pairing does not fix the problem, forget/unpair the headphones on your device again.
    5. Initiate a Product Reset to reset the earbud’s Bluetooth connection.
      • Note that RESET will wipe all previous settings and pairings, so it will be necessary to pair your headphones with your devices again
      • Follow the Product Reset instructions in your Owner's Manual/Quick Start Guide.
      • Manually pair the 2 buds together again, as you did in step 2.  This additional step is necessary because, by default, the reset procedure does not automatically pair the two ear pieces together, but it does wipe all previous settings and resets the internal processor, so it is necessary to manually pair the two ear pieces together again.
      • Pair the buds to your Source Device.
  • If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.

    https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1 

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +47 21 93 29 30

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00