JBL Club Pro+ TWS

JBL Club Pro+ TWS

Utformet for topp ytelse

Getting started with your JBL Club Pro+ TWS

Getting started with your JBL Club Pro+ TWS

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Driver size (mm)
6.8
Driver sensitivity at 1kHz/1mW (dB)
102
Dynamic frequency response range (Hz)
10 Hz – 20 kHz
Impedance (ohms)
16
Number of drivers per ear
1
Charging Case Weight (oz)
2
Earpiece Weight (oz)
0.5
Lade-etuiets vekt (g)
55.4
Øreproppens vekt (g)
13.7
Bluetooth version
5.1
Bluetooth profiles
A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth frequency
2.4 GHz – 2.4835 GHz
Bluetooth transmitted modulation
GFSK, π/4DQPSK, 8DPSK
Charging time (hours from empty)
2
Maximum music play time with ANC off (hours)
8
Maximum music play time with ANC on (hours)
6
Maksimum spilletid (timer)
8
IP Code
IPX4
Voice Assistant integration
Ja
Built-in Microphone
Ja
Hands Free Call
Ja
True Wireless
Ja
Adaptive Noise Cancelling
Ja
Wireless
Ja
3-Button Remote/ Mic
Ja
Charging case
Ja
Rechargable battery
Ja
Bluetooth
Ja

Bare lyden du vil ha, ikke noe annet

Du er alltid på. Da bør vel hodetelefonene også være det? Fra t-banen til pulten til treningssenteret, musikk gjør dagen bedre. JBL CLUB PRO+ TWS-ørepropper leverer det ultimate innen helt trådløse prestasjoner. Sømløs tilkobling, uansett hvilken ørepropp du finner først. Se selv hvor mye du vil ta inn av verdenen utenfor i henhold til hvor du er og hva du holder på med. Når du besvarer en telefon, har du tre mikrofoner som lar deg snakke uten distraherende bråk. Komfort hele dagen, i tillegg til lettvint trådløs lading uten å plugge inn – og, naturligvis, den legendariske JBL Pro Sound – bringer den helt trådløse lyden til neste nivå.

Spillelisten til jobb lyder enda mer inspirerende med helt omsluttende JBL Pro Sound. Bruk JBLs My Headphones-appen til å tilpasse lyden slik du vil ha den, eller velg forhåndsinnstillinger laget av verdens største DJ-er for STAGE+.
Sitter du på en travel kafe og prøver å drukne lyden av den høylytte samtalen på bordet ved siden av? Aktiver teknologien for støydemping for å bevare fokuset. Går du gatelangs på et travelt sted? Slipp inn surroundlyden og gå trygt videre. Trenger du en rask prat med kollegaer? TalkThru gjør det enkelt å holde hodetelefonene på.
JBL CLUB PRO+ TWS parer seg sømløst til enheten så snart du åpner etuiet, takket være Dual Connect + Sync-teknologien. Og ingen grunn til å gå og huske på hvilken du må gripe etter først. Det er fordi du kan gjøre alt mulig med begge øreproppene, om du bruker begge eller bare én av dem.
Det er null stress å ta en telefon ute mens vinden uler. Romlig filtrering gjennom seks mikrofoner leverer krystallklare telefonsamtaler med all den lyden du vil ha, og fjerner uønsket bakgrunnsstøy.
De varer hele arbeidsdagen med lading i åtte timer og tre ganger mer fra etuiet (24 timer). Hvis du trenger ekstra spilletid, tar det bare ti minutter i ladeetuiet for å få enda en times bruk. Det raffinerte ergonomiske ladeetuiet støtter både helt trådløs Qi-lading og tilkoblinger av type C.
Bare ta en kjapp berøring av logoen til JBL for å snakke med Google eller aktivere Amazon Alexa. Tre sensitive mikrofoner betyr at den digitale assistenten ikke har noen problemer med å høre deg eller forstå deg.
Den helstøpte utformingen er inspirert av profesjonelle monitorer for øreplugger. Det gir komfort hele dagen. JBL-appen du har lastet ned vil veilede deg gjennom en enkel Seal Check første gangen du bruker den, slik at du får den beste passformen fra de vedlagte ørepluggene i tre størrelser.
Få bedre kontroll og tilpasning av lytteopplevelsen med denne gratisappen.

FAQs & How-Tos

22 results
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all True Wireless Stereo earphones and cases.
  • The True Adaptive Noise Cancelling technology is a features which adjusts noise-cancelling levels in real-time, 50,000 times per second to account for environmental ambient noises and personal attributes such as movement, hair and eyeglasses to deliver best-in-class Noise Cancelling and immersive sound in any environment.  
    With the help of Feed Forward and Feed Backward microphones, the Adaptive Noise Cancelling technology fully monitors exterior sounds picking up low-frequencies and neutralizing them before they reach the ear. The headphones generate a sound that's phase-inverted by 180 degrees to the unwanted noise, resulting in the two sounds cancelling each other out. 
    In addition, all headphones allow the listener to adapt or adjust the level of ambient noise through features like Ambient Aware and TalkThru.

  • JBL Club headphones do not support aptX. There are a number of different platforms available and our choice was driven by the one that provides the combination of best sound quality and user experience. The platform that we have selected perfectly fits the requirements of the JBL Club series including voice integration and audio customization whilst supplying the Hi Res-certified headphones with the quality of audio they deserve.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • Visit the App Store and download the ‘Amazon Alexa’ App.

      Set up Amazon Alexa #1.png
    1. Click the Plus(+) button on the top right of the screen.
    2. Then select ‘Add Device‘.
    3. Select headphones from the list and then choose your Headphones from the list of available devices.
    4. Follow the rest of the instructions in the Alexa App to complete the setup.
  • If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #5.png
    Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
    Set up Google Assistant #3.png
    Set up Google Assistant #4.png
  • Visit your App store to download the ‘Google Assistant’ App.

    After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

    Step 1

      Set up Google Assistant #1.png
    Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
    Once set up is complete, you will see the below screen:

    Step 2

    Set up Google Assistant #2.png

    PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
      Set up Google Assistant #3.png
    Set up Google Assistant #4.png
  • Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). 
    This restores the earbuds to the factory defaults.
    TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
    It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • To perform a hardware reset of your earbuds, press and hold the reset button on the charging case* for more than 5 seconds. This resets the earbuds without restoring the settings to the factory defaults.
    * Location
    Live 300TWS/Live Pro+ TWS: Inside the charging case between the earbuds.
    Live Free NC+/Reflect Mini NC TWS/Reflect Aero: On the back of the charging case, next to the USB-C port.
    Club Pro+ TWS: On the bottom of the charging case, next to the USB-C port.
< 1 2 3 >

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +47 21 93 29 30

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00