JBL Quantum 400
Øredekkende gaming-hodetelefoner for PC med justeringsbryter for spill- og chattelyd
Sold from 2020 until now
Getting started with your JBL Quantum 400
Quick Start Guide & Downloads
Product Specifications
- Driver size (mm)
- 50
- Driver sensitivity at 1kHz/1mW (dB)
- 98
- Dynamic frequency response range (Hz)
- 20 Hz - 20 kHz
- Impedance (ohms)
- 32
- Passiv frekvensrespons
- 20 Hz – 20 kHz
- Audio Cable Length (ft)
- 3.9
- Audio Cable Length (m)
- 1.2
- Dybde (cm)
- 2.7
- Ear Cup Depth (in)
- 1.1
- Høyde (cm)
- 9.9
- Ear Cup External Height (in)
- 3.9
- Bredde (cm)
- 8.8
- Ear Cup External Width (in)
- 3.5
- Indre bredde (cm)
- 5.8
- Ear Cup Internal Height (in)
- 2.3
- Indre høyde (cm)
- 4.9
- Ear Cup Internal Width (in)
- 1.9
- Hodetelefonens kabellengde (m)
- 3
- Headphone Cable Length (ft)
- 9.8
- Weight (g)
- 274
- Weight (oz)
- 9.7
- 3.5 mm audio cable Input
- Ja
- Audio cable
- Ja
- Built-in Microphone
- Ja
- Over-øret
- Ja
- Replaceable Earpads
- Ja
Sound is Survival
Utnytt lydfordelen. JBL Quantum 400-hodetelefoner holder deg et skritt foran med surround-lyd som fordyper deg i spillet og lar deg forutse enhver bevegelse. Designet for presisjon og en fordypet spilleopplevelse – JBL QuantumSOUND Signature hjelper deg å øke prestasjonen for en ordentlig fordel i kampens hete. JBL Quantum 400 har også et stemmefokusert mikrofonstativ for tydelig samhandling i flerspillerspill, en DISCORD-sertifisert lydbryterfor å justere mellom spill og chattelyd – og er kompatibel med TeamSpeak og mer. Det lette hodebåndet med minneskumpolstrede øreputer lar deg spille komfortabelt i timevis. Spill på et høyere nivå med JBL Quantum 400-hodetelefoner og vinn over konkurrentene dine.
FAQs & How-Tos
-
To configure the 7.1 Surround feature on your PC, please follow the guide below:
1. In the left corner on your screen right next to the Windows logo, click on the spy-glass to start a search on your PC.
2. Type in Sound --> then select Change System Sounds:
3. Make sure that your the Quantum Headphones is your Default Device for both Speakers ( Game ) and Earphone ( Communication device )
4. To configure the 7.1 Surround feature, right click on the Speakers --> then select Configure Speakers
5. Select 7.1 Surround and click on Next
6. Make sure that all boxes are selected, then click Next
7. Make sure both boxes are selected, and then click Next
8. Click on Finish. Now your Quantum headphones is configured for 7.1 Surround sound. The configuration will remain after rebooting PC or reconnecting headphones.
Enjoy your sound experience #SoundIsSurvival #DareToListen
Was this helpful? Thank you for your feedback! -
To stop hearing your own voice through your headphones, please start the JBL QuantumENGINE software, navigate to the "Microphone" tab, and change the sidetone setting to 0.Was this helpful? Thank you for your feedback!
-
You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.Was this helpful? Thank you for your feedback!
-
You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.Was this helpful? Thank you for your feedback!
-
To reset a Quantum headset, you need to connect the product to your computer and open the QuantumEngine.
When you have the QuantumEngine open, go to the "System Software" tap and press "Restore Factory Settings".
Only products that are compatible with the QuantumEngine can be reset this way.
Was this helpful? Thank you for your feedback! -
JBL Quantum 400 and ONE are compatible with USB C to A cable to enjoy PS4 console with RGB Lighting on, and Quantum 600 and 800 with wireless-enabled by USB dongle also gives lighting moment on PS4 console games.
*NOTE that RGB will not light up when connecting with 3.5mm cable to any device (PC, Console, Mobile, etc.) because the cable doesn't have power enough for the RBG lighting.Was this helpful? Thank you for your feedback! -
Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.
How to check your PC settings for the correct recording device
1. Go to Control Panel
2. Select Hardware and Sound
3. Click on Sound
3 Select Recording
4. Make sure to select the proper recording device.-
Right-click on it Quantum headset.
-
Now select "Set Default Device" or Select "Default Communication Device"
5. Check the microphone levels by right-click on your Quantum headset. Then click on Properties
6. Choose Levels.
7. Adjust accordingly.
Please also make sure the volume control on the headset is turned up. Rotate the volume wheel on your headset to increase the volume.
Check that your headset's Game-Chat balance dial and ensure that the balance is correct, you might refer to the screenshot below from the QuantumEngine PC software.
If you still cannot hear the game or music audio, or if the volume is still very low, check if the TalkThrough is activated via the QuantumEngine software.
Finally, you can also do a short press on the Smart Ambient button on the headset (if your headset, has this feature)Was this helpful? Thank you for your feedback! -
-
Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.
Check that the PC is using the correct recording device.
1. Go to Control Panel
2. Select Sound
3 Select Recording
4. Make sure to select the proper recording device.- Right-click on it Quantum headset.
- Now select "Set Default Device" or "Select Default Communication Device"
6. Go to Properties
7. Chose Levels and adjust accordinglyWas this helpful? Thank you for your feedback! -
Yes, you can adjust the game and chat audio balance by rotating the dial-up and down. When you rotate the dial, you'll feel a notch that indicates the balance is 50% game and 50% chat. The slider on Quantum ONE is different and has no notch but instead a visual indicator.Was this helpful? Thank you for your feedback!
-
You can adjust Equalizer, Spatial Sound, RGB LED effects, change microphone settings and update the headset's firmware
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00