JBL Quantum TWS
True Wireless støyreduserende ørepropper for gaming
Getting started with your JBL Quantum TWS
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Product Specifications
- Driver size (mm)
- 10
- Aktiv frekvensrespons
- 20 Hz – 20 kHz
- Driver sensitivity at 1kHz/1mW (dB)
- 106
- Dynamic frequency response range (Hz)
- 20 Hz - 20 kHz
- Impedance (ohms)
- 16
- Charging Case Weight (oz)
- 1.5
- Earpiece Weight (oz)
- 0.4
- Lade-etuiets vekt (g)
- 42.4
- Øreproppens vekt (g)
- 11
- Bluetooth version
- 5.2
- Bluetooth profiles
- A2DP V1.3, AVRCP V1.6, HFP V1.8
- Bluetooth frequency
- 2.4 GHz - 2.4835 GHz
- Bluetooth transmitted modulation
- GFSK, π/4 QPSK, 8DPSK
- Charging time (hours from empty)
- 2
- Maximum music play time with ANC off (hours)
- 8
- Maximum music play time with ANC on (hours)
- 5
- Maximum talk time (hours)
- 4
- Maksimum spilletid (timer)
- 16
- IP Code
- IPX4
- True Adapte Noice Cancelling
- Ja
- Charging cable
- Ja
- Ambient Aware
- Ja
- Built-in Microphone
- Ja
- Hands Free Call
- Ja
- True Wireless
- Ja
- Adaptive Noise Cancelling
- Ja
- Active Noise Cancelling
- Ja
- Wireless
- Ja
- Charging case
- Ja
- Rechargable battery
- Ja
- Bluetooth
- Ja
Lyd er overlevelse
Spill hvor som helst og hør alt med JBL Quantum TWS. True Adaptive-støykansellering begrenser distraksjoner når du fordyper deg i nøyaktig surroundlyd. Eller, hvis du trenger å hoppe tilbake til den virkelige verden, lar JBL Dual Source deg bytte fra spillyd til innkommende anrop raskt og enkelt, mens Ambient Aware holder deg oppmerksom på omgivelsene dine. Overgangen mellom enheter er sømløs uansett hvor eventyrene fører deg, takket være kompatibiliteten med alle Bluetooth-kilder. Par enkelt og raskt med Bluetooth-smarttelefoner og opprette 2,4 GHz-tilkoblinger med lav forsinkelse til kompatible enheter med den medfølgende USB-C-dongelen i et ladeetui som legger 16 timers strøm til de 8 timene som finnes i øreproppene dine.
Føl som om du går inn i spillet med JBL QuantumSURROUND* for oppslukende og nøyaktig lyd overalt rundt deg.
*JBL QuantumSURROUND er kun tilgjengelig på PC i kombinasjon med JBL QuantumENGINE-programvare. Se tilkoblingsveiledningen for kompatibilitet.
Etabler 2,4 GHz-tilkobling med lav forsinkelse til kompatible enheter med den medfølgende USB-C-dongelen som sitter godt i ladeboksen. JBL Quantum TWS-ørepropper er kompatible med alle Bluetooth-støttede enheter, som smarttelefoner og nettbrett.
Gå aldri glipp av en samtale mens du forsvarer galaksen. Etter trådløs tilkobling via 2.4GHz lossless til en kompatibel enhet, kan du enkelt ta en innkommende samtale og etterpå gå tilbake til din trådløse 2.4Ghz lossless-tilkobling med JBL Dual Source
Hold hodet i spillet med automatisk kalibrering av JBLs True Adaptive-støyredusering. Eller hold et øre på de virkelige omgivelsene med Ambient Aware.
Enten du roper ut kommandoer eller ringer venner for et spill, vil alltid stemmen din komme igjennom klar og ren, takket være samtalekvaliteten til de 6 mikrofonene med stråledannende teknologi.
Spill når du får sjansen, dag eller natt, regn eller solskinn, med 8 timers batterilevetid og 16 timer i etuiet, pluss en slitesterk, lett IPX4-vannbestandig design for komfort og sikkerhet på farten.
Trenger du hjelp fra den virkelige verden? Trykk for å snakke når du er koblet til mobilenheten din og få hjelp fra Hey Google og Alexa med Multi AI-støtte.
.
Få full kontroll over din True Wireless Stereo-lyd hvor som helst. JBL Quantum TWS er kompatibel med proprietær JBL Quantum PC-programvare og JBL Headphones App, slik at du kan justere EQ-, mikrofon- og surround-lydinnstillingene for et perfekt spillmiljø.
FAQs & How-Tos
14 results
-
Yes, the JBL Quantum TWS and JBL Quantum TWS air earbuds are compatible with the JBL Headphones app. It'll allow you to control EQ, ANC (only JBL Quantum TWS) and Smart Ambient feature, Smart Audio & Gaming etc. for better experiences with your headset just like other JBL lifestyle products.Was this helpful? Thank you for your feedback!
-
Place the USB wireless dongle in the USB-C connector of your device and place the earbuds in your ears. The earbuds will automatically connect to your USB wireless dongle. If the earbuds don't pair automatically you can manually pair them again by connecting the JBL Quantum TWS to a mobile device via Bluetooth and open the JBL Headphones app. Turn on the "Dongle Pairing" mode and then press the pairing button on the USB wireless dongle. (Note: USB wireless dongle needs to be connected to an activated device). You will get a message on your JBL Headphones app that the pairing is successful and then press "Understood".Was this helpful? Thank you for your feedback!
-
If you are not using the microphone, make sure that any communication software such as Zoom, Skype, Discord, etc. are closed and that your microphone is muted. You can also take advantage of it's Dual Connect feature and place one of the earbuds in the charging case and speed charge the earbuds to extend the playback time.Was this helpful? Thank you for your feedback!
-
When the earbuds are connected to the USB wireless dongle and Bluetooth connection at the same time, triple tab on the left earbud to switch between the two connections. You'll hear a tone after you triple tab the left earbud signaling the switching is in progress. If you receive an incoming call from your mobile device, you can double tap either earbud and the earbuds will automatically switch over to that connection while answering the call.Was this helpful? Thank you for your feedback!
-
The JBL Quantum TWS works on most mobile devices, however, some mobile devices restrict the utilization of it's audio and microphone functions via USB-C causing there to be no audio or microphone operation. In these cases we recommend connecting to the earbuds using their Bluetooth connection.Was this helpful? Thank you for your feedback!
-
You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.Was this helpful? Thank you for your feedback!
-
To reset a Quantum headset, you need to connect the product to your computer and open the QuantumEngine.
When you have the QuantumEngine open, go to the "System Software" tap and press "Restore Factory Settings".
Only products that are compatible with the QuantumEngine can be reset this way.
Was this helpful? Thank you for your feedback! -
JBL Quantum Headphones Upgrade tool redefines your headphones experience. Through your macOS device, you can now conveniently upgrade the headset.
Download from macOS app store: https://apps.apple.com/us/app/jbl-quantumengine/id1645040444
Supported models are:- JBL Quantum 610
- JBL Quantum 810
- JBL Quantum 910
- JBL Quantum 910P
- JBL Quantum 910X
- JBL Quantum TWS
Was this helpful? Thank you for your feedback! -
QUANTUM ENGINE
Software Update Release Notes
------------------------------------------------------------------------
Software Version: V1.11.0.1511
Release Date: September 19, 2022
Release Media: Website & Quantum ENGINE
What’s New- Improved firmware stability upgrading process flow for the QUANTUM 910.
------------------------------------------------------------------------
------------------------------------------------------------------------
QUANTUM ENGINE
Software Update Release Notes
------------------------------------------------------------------------
Software Version: V1.11.0.1510
Release Date: August 24, 2022
Release Media: Website & Quantum ENGINE
What’s New- Added support for the new QUANTUM 910 Wireless Headphones
- Over 30 improvements addressing user interface, usability, and stability of the app for a better user experience.
Was this helpful? Thank you for your feedback! -
It is not possible to have Ambient Aware or TalkThru activated at the same time as Sidetone when the microphone is turned on during a call. This is the case no matter if you are using Bluetooth or the 2.4 GHz mode.
You can use Ambient Aware during a call if Sidetone is turned off. You are able to do this in both Bluetooth or the 2.4 GHz mode.
All three audio modes are activated if the microphone on your device is turned off no matter if you are using Bluetooth or the 2.4 GHz mode.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
