JBL Vibe 200TWS
Trådløse ørepropper
Sold from 2022 until now
Getting started with your JBL Vibe 200TWS
Quick Start Guide & Downloads
Product Specifications
- Driver size (mm)
- 8
- Driver sensitivity at 1kHz/1mW (dB)
- 108
- Dynamic frequency response range (Hz)
- 20 Hz – 20 kHz
- Impedance (ohms)
- 16
- Lade-etuiets vekt (g)
- 39.3
- Charging Case Weight (oz)
- 1.4
- Øreproppens vekt (g)
- 8.7
- Earpiece Weight (oz)
- 0.3
- Bluetooth profiles
- A2DP 1.3, AVRCP 1.6, HFP 1.7
- Bluetooth frequency
- 2.4 GHz – 2.4835 GHz
- Bluetooth transmitted modulation
- GFSK, π/4DQPSK, 8DPSK
- Bluetooth version
- 5.0
- Charging case battery life (max hours)
- 15
- Charging time (hours from empty)
- 2
- Maksimum spilletid (timer)
- 5
- Bluetooth
- Ja
- Charging cable
- Ja
- Built-in Microphone
- Ja
- Charging case
- Ja
- Hands Free Call
- Ja
- Rechargable battery
- Ja
- Speed charge
- Ja
- Touch Control
- Ja
- True Wireless
- Ja
- Wireless
- Ja
- IP Code
- IPX2
Trådløse ørepropper
Gi kraft til rutinen din med lyden du elsker! Få kraftig JBL Deep Bass-lyd og all friheten med ekte trådløs tilkobling i opptil 20 timer med JBL Vibe 200TWS. Ta verdenen din med deg. Bare et trykk på øreproppene styrer samtalene og musikken din, og setter deg i kontakt med stemmeassistenten din. Og med dobbel tilkobling kan du bruke begge øreproppene og spare batterilevetid. JBL Vibe 200TWS er ultralett og komfortabel takket være sin ergonomiske form, og er morsom og klar til bruk.
FAQs & How-Tos
-
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback! -
If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.
https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+47 21 93 29 30
Monday - Friday: 09.00-17.00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00