JBL Vibe Beam
Helt trådløse ørepropper
Sold from 2022 until now
Getting started with your JBL Vibe Beam
Quick Start Guide & Downloads
Product Specifications
- Driver size (mm)
- 8
- Driver sensitivity at 1kHz/1mW (dB)
- 100
- Dynamic frequency response range (Hz)
- 20 Hz – 20 kHz
- Impedance (ohms)
- 16
- Lade-etuiets vekt (g)
- 39.5
- Charging Case Weight (oz)
- 1.4
- Øreproppens vekt (g)
- 8.8
- Earpiece Weight (oz)
- 0.3
- Bluetooth profiles
- A2DP V1.3, AVRCP V1.6, HFP V1.7
- Bluetooth frequency
- 2.4 GHz - 2.4835 GHz
- Bluetooth transmitted modulation
- GFSK, π/4 DQPSK, 8DPSK
- Bluetooth version
- 5.2
- Charging case battery life (max hours)
- 24
- Charging time (hours from empty)
- 2
- Maksimum spilletid (timer)
- 8
- Bluetooth
- Ja
- Charging cable
- Ja
- Ambient Aware
- Ja
- Built-in Microphone
- Ja
- Charging case
- Ja
- Hands Free Call
- Ja
- Rechargable battery
- Ja
- Speed charge
- Ja
- TalkThru
- Ja
- Touch Control
- Ja
- True Wireless
- Ja
- Water Resistant
- Ja
- IP Code
- IPX54 earbuds/IPX2 charging case
Dyp bass, mye moro
Bring lyden med deg. Med bass du kjenner,opptil 32 timers batteritid, og et sikkert og godt feste, er de vann og sprutbestandige JBL Vibe Beam designet for en hel dag med underholdning. Om du vandrer i byens gater eller ligger på stranden, har du alltid krystallklare samtaler i stereo, uten å bruke hendene. Det hele skjer mens Smart Ambient-teknologi holder deg oppmerksom på omgivelsene. Trenger du en ekstra boost, lader du på 10 minutter inntil 2 timer med ekstra strøm.
FAQs & How-Tos
-
It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.
If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
Repeat until the contact points are visibly clean, and charging should work as designed.
Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
This procedure can be performed on all True Wireless Stereo earphones and cases.Was this helpful? Thank you for your feedback! -
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off).
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+47 21 93 29 30
Monday - Friday: 09.00-17.00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00