JBL Tune 230NC TWS

JBL Tune 230NC TWS

Støyreduserende og ekte trådløse hodetelefoner

Sold from 2022 until now

Getting started with your JBL Tune 230NC TWS

Getting started with your JBL Tune 230NC TWS

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Driver size (mm)
6
Number of Microphones
4
Driver sensitivity at 1kHz/1mW (dB)
105
Dynamic frequency response range (Hz)
20 Hz – 20 kHz
Impedance (ohms)
16
Lade-etuiets vekt (g)
47.3
Charging Case Weight (oz)
1.7
Øreproppens vekt (g)
10.2
Earpiece Weight (oz)
0.4
Bluetooth profiles
A2DP 1.3 , AVRCP 1.6 HFP 1.7
Bluetooth frequency
2.4 GHz - 2.4835 GHz
Bluetooth transmitted modulation
GFSK, π/4-DQPSK, 8-DPSK
Bluetooth version
5.2
Charging time (hours from empty)
2
Maximum music play time with ANC off (hours)
10
Maximum music play time with ANC on (hours)
8
Maksimum spilletid (timer)
40
Bluetooth
Ja
Charging cable
Ja
Active Noise Cancelling
Ja
Adaptive Noise Cancelling
Ja
Ambient Aware
Ja
Built-in Microphone
Ja
Charging case
Ja
Hands Free Call
Ja
JBL Pure Bass Sound
Ja
Rechargable battery
Ja
Sweat Proof
Ja
TalkThru
Ja
Touch Control
Ja
True Wireless
Ja
Water Resistant
Ja
Wireless
Ja
IP Code
IPX4

Pure Bass. Null støy.

Takle dagen én sang om gangen med JBL Tune 230NC TWS. Ekte trådløse ørepropper gir deg 40 timer med eksepsjonell JBL Pure Bass-lyd, mens det ergonomiske og vannavstøtende designet gir deg komfort hele dagen i all slags vær. Koble sammen samtaler enkelt og sømløst med fire mikrofoner som avbryter omgivelsesstøy og gir perfekte samtaler hvor som helst. Og med aktiv støyreduksjon og Smart Ambient-teknologi, velger du om du vil stenge verden ute eller engasjere deg i omgivelsene dine. Det lette, velsittende designet sikrer komfort hele dagen lang. Det beste av alt er at JBL-hodetelefoner-appen lar deg tilpasse hele lytteopplevelsen. Hold kontakten med verdenen din, på din måte.

Smart designede 6.0 mm drivere som er forbedret med en Stick- designen, leverer JBLs Pure Bass-lyd slik at du føler hver eneste pulserende takt.
Hør mer av det du ønsker og mindre av det du ikke ønsker. Aktiv støyreduserende teknologi med to mikrofoner lar deg minimere lyddistraksjoner. Med Ambient Aware kan du når som helst balansere mengden omgivelseslyd slik at du føler deg tryggere når du er ute i verden, mens TalkThru lar deg stoppe for en rask prat uten å måtte ta av deg hodetelefonene.
Nyt problemfrie, håndfrie samtaler i stereo. Tune 230NC TWS er utstyrt med 4 mikrofoner, slik at du alltid vil bli hørt med perfekt klarhet. Ikke nøl med å ta i mot eller ringe tilbake.
Gå aldri glipp av ett taktslag med 40 (10+30) timers batterilevetid, eller 8 timer pluss 24 timer i ladeesken når støyreduksjon er aktivert. Trenger du et løft? Hurtiglading i bare 10 minutter gir deg 2 timer spilletid.
Ikke bli hindret av dårlig vær. Takket være IPX4 vanntetthet og svettebestandighet, er det ikke en treningsøkt eller nedtur Tune 230NC TWS ikke kan håndtere.
Aldri vær uten musikken din. Den lukkede Stick- designen sikrer komfort uten trykk, og eliminerer forstyrrelser fra omgivelsene med en design som er så lett at du glemmer at du bruker dem.
Lytt hele dagen, som du vil. Still inn lyden du vil ha med den dedikerte appen, og gjør JBL Tune 230NC til den perfekte lydpartner.

FAQs & How-Tos

6 results
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all True Wireless Stereo earphones and cases.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). 
    This restores the earbuds to the factory defaults.
    TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
    It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • This headphone is supported by the My JBL Headphones App.
  • This unit is IPX4 rated, which means that it is sweatproof (suitable for working out) and can withstand water splashes from any direction. However, the unit is not waterproof and should never be submerged in water.

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +47 21 93 29 30

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00