JBL E65BTNC
Trådløse over-ear hodetelefoner med støyreduksjon
Getting started with your JBL E65BTNC
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Product Specifications
- Driver size (mm)
- 40.0
- Driver sensitivity at 1kHz/1mW (dB)
- 95dB
- Dynamic frequency response range (Hz)
- 20 Hz - 20 kHz
- Impedance (ohms)
- 32.0
- Number of drivers per ear
- 1.0
- Headphone cable length (cm)
- 133.4
- Headphone cable length (ft)
- 4.4
- Weight (g)
- 258.0
- Weight (oz)
- 9,1
- Bluetooth profiles
- HFP v1.6, HSP v1.2, A2DP v1.2, AVRCP v1.4
- Bluetooth frequency
- 2.402GHz-2.48GHz
- Bluetooth transmitted modulation
- GFSK,π/4DQPSK, 8DPSK
- Bluetooth version
- 4.1
- Charging time (hours from empty)
- 2.0
- Maximum music play time with ANC off (hours)
- 30.0
- Maximum music play time with ANC on (hours)
- 15.0
- Maksimum spilletid (timer)
- 24.0
- Maximum talk time (hours)
- 24.0
- Bluetooth
- Ja
- Active Noise Cancelling
- Ja
- Built-in Microphone
- Ja
- Detachable Cable
- Ja
- Fabric headband
- Ja
- Flat-fold design
- Ja
- Hands Free Call
- Ja
- JBL Signature Sound
- Ja
- Multi-Point Connection
- Ja
- Over-øret
- Ja
- Rechargable battery
- Ja
- Remote control on ear cups?
- Ja
- Speed charge
- Nei
- Wireless
- Ja
Steng verden ute, slik at du virkelig kan ta inn musikken.
JBL E65BTNC-hodetelefoner kombinerer førsteklasses materialer med et fantastisk design og gir deg den verdenskjente signaturlyden fra JBL. Alt er trådløst og med en overlegen, aktiv støyreduksjon. JBL E65BTNC har et mykt og behagelig hodebånd i stoff og vinklede, forseglende øreputer som gir en bedre og dypere lydopplevelse med aktiv støyreduksjon, enten den brukes trådløst eller ikke. Batteritiden er på 24 timer i Bluetooth-modus (15 timer med Bluetooth der støyreduksjon er aktiv) og det tar bare to timer å lade den helt opp. Det er enkelt å gjøre flere ting på samme tid med JBL E65BTNC-hodetelefonene fordi hodetelefonene kan sømløst bytte mellom to enheter, noe som gjør at du aldri går glipp av et anrop når du hører på favorittsangen din eller ser en god film. I tillegg får du en avtakbar, flokefri stoffledning med en 1-knapps fjernkontroll. Den finnes i tre forskjellige farger i et sammenleggbart design, som gjør at den er enkel å ta med seg.
FAQs & How-Tos
-
This headphone does not support aptX, aptX HD, aptX Low Latency audio codecs.Was this helpful? Thank you for your feedback!
-
Yes. Our E series/Duet headphones are made with synthetic protein leather.Was this helpful? Thank you for your feedback!
-
Yes. The E65BTNC headphones have the ability to pair and connect to two devices at the same time.Was this helpful? Thank you for your feedback!
-
Yes, but only via cabled connection. When you insert the USB charging cable, Bluetooth is switched off, so wireless listening is not possible.Was this helpful? Thank you for your feedback!
-
Yes, you do not need to have music playing to keep the noise cancelling switched on. There may be a slight residual hiss from the NC system, which would usually be masked by music, but there will still be a significant reduction of external noise.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
With the headphones switched ON, press and hold the Volume + and Volume - buttons for more than 5 seconds. The LED blinks slowly for about two seconds, and now you have reset to factory settings.Was this helpful? Thank you for your feedback!
-
Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. If you are attempting to pair to a different device, make sure the E65BTNC headphones are turned on, and press and hold the Bluetooth button located at the bottom of the right ear cup. The headphone should display on your new device within 3-5 seconds on your list of discoverable devices.Was this helpful? Thank you for your feedback!
-
The E65BTNC noise cancellation button is located on the bottom Right ear cup. To turn the Active Noise Cancellation on, press and hold the button (Located next to the Bluetooth button) for 2-3 seconds or until you hear the confirmation audio tone. To turn off the noise cancellation, press and hold for 2 seconds or until you hear the audio tone powering off. A white LED next to the button lights up when NC is on.Was this helpful? Thank you for your feedback!
-
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00
