JBL Tune 510BT

JBL Tune 510BT

Trådløse hodetelefoner som sitter på øret

Getting started with your JBL Tune 510BT

Getting started with your JBL Tune 510BT

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Driver size (mm)
32
Number of Microphones
1
Driver sensitivity at 1kHz/1mW (dB)
103.5
Dynamic frequency response range (Hz)
20 Hz – 20 kHz
Impedance (ohms)
32
Weight (g)
160
Weight (oz)
5.6
Hodetelefonens kabellengde (m)
0.2
Headphone Cable Length (ft)
0.7
Ear Cup External Height (in)
2.9
Ear Cup External Width (in)
2.9
Ear Cup Internal Height (in)
1.3
Ear Cup Internal Width (in)
1.3
Ear Cup Depth (in)
0.7
Høyde (cm)
7.3
Bredde (cm)
7.3
Indre bredde (cm)
3.2
Indre høyde (cm)
3.2
Dybde (cm)
1.7
Bluetooth version
5.0
Bluetooth profiles
A2DP v1.3, AVRCP v1.6, HFP v1.7
Bluetooth frequency
2.4 GHz – 2.4835 GHz
Bluetooth transmitted modulation
GFSK, _x001E_/4DQPSK,8DPSK
Charging time (hours from empty)
2
Maksimum spilletid (timer)
40
Multi-point Connection
Ja
Remote control on ear cups
Ja
On-ear
Ja
Sammenleggbar
Ja
Voice Assistant integration
Ja
Built-in Microphone
Ja
Hands Free Call
Ja
JBL Pure Bass Sound
Ja
Wireless
Ja
Rechargable battery
Ja
Bluetooth
Ja

Heftig bass, hele dagen lang.

JBL Tune 510BT-hodetelefoner lar deg overføre kraftig JBL Pure Bass-lyd uten forbehold. Disse hodetelefonene er brukervennlige, og gir deg opp til 40 timer med ren glede, samt 2 timers ekstra batteritid med bare 5 minutters lading gjennom USB-C-ladekabelen. Og hvis en samtale kommer mens du ser på en video på en annen enhet, vil JBL Tune 510BT sømløst skifte over til din mobil. JBL Tune 510BT-hodetelefoner er Bluetooth 5.0-aktiverte og utformet for å være komfortable, og lar deg også koble til Siri eller Google Now uten å bruke mobilen din. JBL Tune 510BT-hodetelefoner er tilgjengelig i flere friske farger og kan brettes sammen for å enkelt bære med deg. Hodetelefonene er en «grab ‘n go»-løsning som hjelper deg med å tilføre musikk i alle aspekter av ditt travle liv.

De har den viden kjente JBL Pure Bass-lyden, som du kan finne på de mest berømte konsertstedene over hele verden.
Overfør trådløst musikk med høy kvalitet fra smarttelefon uten rotete ledninger.
For langvarig moro, lytt trådløst i 40 timer og lad opp batteriet på så lite som 2 timer med den praktiske Type-C USB-kabelen. En rask 5-minutters opplading gir deg 2 ekstra timer med musikk.
Du kan enkelt bytte fra én Bluetooth®-enhet til en annen. Det er lett å bytte fra en video på nettbrettet til et anrop på mobilen, så du kommer aldri til å gå glipp av et anrop.
Kontroller lyden og håndter samtaler enkelt fra hodetelefonene, takket være de praktiske knappene på øreklokkene.
De lette materialene og myke øreputene med polstret hodebånd gjør hodetelefonene komfortable å ha på i lange perioder av gangen. Designet som kan brettes sammen gjør det enkelt for deg å bære dine hodetelefoner hvor som helst du vil ha musikk.
Siri eller Hey Google er bare et tastetrykk unna: aktiver taleassistenten på enheten din ved å trykke på multifunksjonsknappen.

FAQs & How-Tos

5 results
  • Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices. 
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • • Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

    • Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

    • Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

    • Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

    • Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

    • Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
  • 1. First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.

    2. "Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with your product.

    3. Try to restart the source device (Smartphone/tablet/PC) by powering it off and on again and after restarting, try to establish a Bluetooth connection to your product.

    4. If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.

    5. Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.

    6. Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.

    You should now have a successful pairing with your device. If you are still experiencing issues, please contact us again.
  • If you are having trouble pairing your headphones or if your device is asking for a PIN, please make sure to check all available BT connections in your device's settings. Verify that you are connecting to the headphone's product name that excludes 'LE'. The 'LE' connection is only intended for voice assistant feature compatible with your headphones. If the voice assistant feature has not yet been configured, this would explain why the 'LE' connection appears as an available connection, but cannot be used for Bluetooth audio.

    https://harman.widen.net/s/dtsldx6jxx/bluetooth-pairing-issue-with-voice-assistant-headphone-le-image1 

Can’t find what you’re looking for?

Call us

Call us

Call us now at: +47 21 93 29 30

Monday - Friday: 09.00-17.00

E-mail us

E-mail us

We are here Monday – Sunday to answer you as fast as we can!

Email us
Chat with us

Chat with us

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00

message

WhatsApp Us

Send us a message here 

Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00