Tune 225TWS Ghost Edition
Bli ett med musikken din og verden. Uten ledninger som holder deg igjen, kan du virkelig glede deg over favorittmusikken med JBL Pure Bass. JBL Tune 225TWS Ghost Edition-ørepluggene gir deg straks sømløs tilkobling til musikk og telefonoppringninger. Du bare åpner etuiet for å spille musikken mens JBL Tune 225TWS Ghost Edition-øreproppene straks kobler seg til enheten, og Dual Connect gir tilgang til en av øreproppene, eller begge. Få mer lyttetid og komfort med opptil 25 timers batteritid. Ser du etter noe som passer til stilen din? Oppdag helt nye Ghost edition. Den gjennomsiktige
designen, tilgjengelig i oransje og sort, står frem for sitt originale og moderne utseende.
Product Specifications
General Specifications
| Ear tip material | Silicon |
|---|---|
| Driver size (mm) | 12 |
Audio Specifications
| Driver sensitivity at 1kHz/1mW (dB) | 105 |
|---|---|
| Dynamic frequency response range (Hz) | 20 Hz – 20 kHz |
| Impedance (ohms) | 32 |
| Number of drivers per ear | 1 |
Dimension Specifications
| Charging Case Weight (oz) | 1.8 |
|---|---|
| Earpiece Weight (oz) | 0.3 |
| Lade-etuiets vekt (g) | 49.7 |
| Øreproppens vekt (g) | 9.8 |
Control Connect Specifications
| Bluetooth profiles | A2DP 1.3, AVRCP 1.5, HFP 1.7 |
|---|---|
| Bluetooth frequency | 2.402 GHz – 2.48 GHz |
| Bluetooth transmitted modulation | GFSK, π/4DQPSK, 8DPSK |
| Bluetooth version | 5.0 |
Documents & Downloads
Gallery
What’s in the Box
- JBL Tune 225TWS Ghost Edition
- Type-C USB-ladekabel
- Ladeetui
- 1 x garanti/advarsel (W/!)
- 1 x hurtigstartveiledning/sikkerhetsdatablad (S/i)
FAQs & How-Tos
-
How to avoid Bluetooth Interference or Interruptions
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.
• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.
• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.
• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.
• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.
• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.Was this helpful? Thank you for your feedback!
-
How to Turn off your TWS Headphones
1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).
Was this helpful? Thank you for your feedback!
-
How to Factory Reset True Wireless Stereo Headphones
Place both ear pods in the charging box, while the charging box is plugged into a power source. Press and hold the button on the Right pod for about 5 seconds. The LED on the pod will turn off and then turn back on again. This restores to factory defaults. (Please note that charging must take place for reset to work.) It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
Was this helpful? Thank you for your feedback!
-
Headphones & Third Party Communication Apps (Skype, Zoom, WhatsApp, etc)
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback!
-
Pairing issues with a Computer or PC
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).
The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:
• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
Always get the latest driver version available for your Computer/PC/Laptop.
To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.
The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.Was this helpful? Thank you for your feedback!
-
Pairing issues with a Smartphone or Tablet
1. First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.
2. "Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with your product.
3. Try to restart the source device (Smartphone/tablet/PC) by powering it off and on again and after restarting, try to establish a Bluetooth connection to your product.
4. If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.
5. Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.
6. Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.
You should now have a successful pairing with your device. If you are still experiencing issues, please contact us again.Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Chat with us
Monday - Friday: 09.00-17.00
Saturday - Sunday: 10:00-16:00