JBL Quantum 810 Wireless
Trådløse, øredekkende gaming-hodetelefoner, med Active Noise Cancelling og Bluetooth
Getting started with your JBL Quantum 810 Wireless
Documents & Downloads
Product Specifications
- Driver size (mm)
- 50
- Aktiv frekvensrespons
- 20 Hz – 40 kHz
- Driver sensitivity at 1kHz/1mW (dB)
- 95
- Dynamic frequency response range (Hz)
- 20 Hz - 20 kHz
- Impedance (ohms)
- 32
- Passiv frekvensrespons
- 20 Hz – 20 kHz
- Dybde (cm)
- 2.7
- Ear Cup Depth (in)
- 1.1
- Høyde (cm)
- 9.7
- Ear Cup External Height (in)
- 3.8
- Bredde (cm)
- 8.7
- Ear Cup External Width (in)
- 3.4
- Indre bredde (cm)
- 6.2
- Ear Cup Internal Height (in)
- 2.4
- Indre høyde (cm)
- 4.2
- Ear Cup Internal Width (in)
- 1.7
- Hodetelefonens kabellengde (m)
- 1.5
- Headphone Cable Length (ft)
- 4.9
- Weight (g)
- 418
- Weight (oz)
- 14.7
- Bluetooth profiles
- A2DP 1.3, HFP 1.8
- Bluetooth frequency
- 2400 MHz - 2483.5 MHz
- Bluetooth transmitted modulation
- GFSK, /4π DQPSK, 8DPSK
- Bluetooth version
- 5.2
- Charging time (hours from empty)
- 3.5
- Maksimum spilletid (timer)
- 43
- 3.5 mm audio cable Input
- Ja
- Audio cable
- Ja
- Bluetooth
- Ja
- Charging cable
- Ja
- Active Noise Cancelling
- Ja
- Built-in Microphone
- Ja
- Over-øret
- Ja
- Wireless
- Ja
Lyd er overlevelse
Oppgrader til JBL Quantum 810 Wireless med Hi-Res-sertifisert JBL QuantumSOUND som gjør at selv de minste lyddetaljene kommer inn krystallklart, og JBL QuantumSURROUND, den beste romlige surroundlyden for spill med DTS-hodetelefoner: X versjon 2.0-teknologi. Med 2,4 GHz trådløs tilkobling og Bluetooth 5.2-strømming og batterier med 43 timers levetid som lades mens du spiller, vil du aldri gå glipp av et sekund. Den talefokuserte bommikrofonen og støydempende teknologien er utviklet for spillmiljøer og garanterer at du alltid høres tydelig enten du snakker strategi med teamet ditt eller bestiller pizza. Juster den Discord-sertifiserte dreiebryteren for den perfekte balansen, og løp og skyt hele dagen og natten med bekvemmeligheten av en mindre 2,4 GHz dongle og komforten av førsteklasses skinndekkede øreputer i minneskum.
FAQs & How-Tos
-
You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.Was this helpful? Thank you for your feedback!
-
You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.Was this helpful? Thank you for your feedback!
-
To reset a Quantum headset, you need to connect the product to your computer and open the QuantumEngine.
When you have the QuantumEngine open, go to the "System Software" tap and press "Restore Factory Settings".
Only products that are compatible with the QuantumEngine can be reset this way.
Was this helpful? Thank you for your feedback! -
JBL Quantum 400 and ONE are compatible with USB C to A cable to enjoy PS4 console with RGB Lighting on, and Quantum 600 and 800 with wireless-enabled by USB dongle also gives lighting moment on PS4 console games.
*NOTE that RGB will not light up when connecting with 3.5mm cable to any device (PC, Console, Mobile, etc.) because the cable doesn't have power enough for the RBG lighting.Was this helpful? Thank you for your feedback! -
You might have to add a USB extension dock to get the JBL Quantum 350/600/800/810 dongle as close to the headset, or place the common sources of interference (e.g. routers, Wi-Fi speakers etc.) as far from the JBL Quantum 350/600/800/810 dongle.
Was this helpful? Thank you for your feedback! -
Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.
How to check your PC settings for the correct recording device
1. Go to Control Panel
2. Select Hardware and Sound
3. Click on Sound
3 Select Recording
4. Make sure to select the proper recording device.-
Right-click on it Quantum headset.
-
Now select "Set Default Device" or Select "Default Communication Device"
5. Check the microphone levels by right-click on your Quantum headset. Then click on Properties
6. Choose Levels.
7. Adjust accordingly.
Please also make sure the volume control on the headset is turned up. Rotate the volume wheel on your headset to increase the volume.
Check that your headset's Game-Chat balance dial and ensure that the balance is correct, you might refer to the screenshot below from the QuantumEngine PC software.
If you still cannot hear the game or music audio, or if the volume is still very low, check if the TalkThrough is activated via the QuantumEngine software.
Finally, you can also do a short press on the Smart Ambient button on the headset (if your headset, has this feature)Was this helpful? Thank you for your feedback! -
-
Yes, you can adjust the game and chat audio balance by rotating the dial-up and down. When you rotate the dial, you'll feel a notch that indicates the balance is 50% game and 50% chat. The slider on Quantum ONE is different and has no notch but instead a visual indicator.Was this helpful? Thank you for your feedback!
-
You can update our Quantum 600 and 800 using the QuantumENGINE software on your PC.
To update the headset, go to SYSTEM SOFTWARE tab, find section HEADSET, and press CHECK FOR UPDATE and then INSTALL UPDATE.Was this helpful? Thank you for your feedback! -
The single ANC/TalkThru button accomplishes several tasks, turning the ANC on and off, and turning the TalkThru on and off. It behaves slightly different than you might expect. Here is a description of how to accomplish each task.
To turn ANC on and off
Short Press: ANC On (voice prompt states ANC On)
Short Press: ANC Off (voice prompt states ANC Off)
To turn TalkThru on and off
Long Press: TalkThru On (voice prompt states TalkThru On)
Short or Long Press: TalkThru Off, but ANC is now On (voice prompt states ANC On)
Short Press Again to turn ANC Off as well (voice prompt states ANC Off)
NOTE: The voice prompt will never state that TalkThru is Off.
Was this helpful? Thank you for your feedback! -
JBL Quantum Headphones Upgrade tool redefines your headphones experience. Through your macOS device, you can now conveniently upgrade the headset.
Download from macOS app store: https://apps.apple.com/us/app/jbl-quantumengine/id1645040444
Supported models are:- JBL Quantum 610
- JBL Quantum 810
- JBL Quantum 910
- JBL Quantum 910P
- JBL Quantum 910X
- JBL Quantum TWS
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call us
Call us now at:
+47 21 93 29 30
Monday - Friday: 09.00-17.00
Chat with us
Monday - Friday: 09.00-18.00
Saturday - Sunday: 10:00-16:00