JBL BAR 9.1 True Wireless Surround with Dolby Atmos®

JBL BAR 9.1 True Wireless Surround with Dolby Atmos®

9.1 Channel Soundbar System with surround speakers and Dolby Atmos®

Sold from 2020 until now

Getting started with your JBL BAR 9.1 True Wireless Surround with Dolby Atmos®

Getting started with your JBL BAR 9.1 True Wireless Surround with Dolby Atmos®

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Power supply
100 - 240VAC, ~ 50/60Hz
Battery charge time
3 hours
Total speaker power output (Max. @THD 1%)
820 W
Main Soundbar output power (Max. @THD 1%)
400
Surround speakers output power (Max. @THD 1%)
2 x 60W
Subwoofer output power (Max. @THD 1%)
300
Soundbar transducer
4×racetrack drivers + 2 × up-firing full-range drivers+3 × 0.75” (20mm) tweeter
Surround transducer (per piece)
Up-firing full-range driver + 0.75” (20mm) tweeter
Subwoofer transducer
10"
Operating temperature
0°C - 45°C
Standby for Soundbar (when all wireless connections are deactivated)
< 0.5 W
Networked standby (Soundbar)
< 6.0 W
Networked standby (Subwoofer)
< 2.0 W
Time to standby
<10 minutes
HDMI In
1
HDMI eARC
1
HDMI HDCP version
2.3
Connections
1 Optical, Bluetooth, Chromecast, AirPlay2, USB
Soundbar dimensions (WxHxD)
884 x 62 x 120 (mm), 34.8” x 2.4” x 4.7”
Detachable surround speaker, per piece
173 x 60 x 120 (mm) / 6.8” x 2.4” x 4.7”
Subwoofer dimensions (WxHxD)
305 x 440 x 305(mm) / 12.0" x 17.3" x 12.0"
Soundbar weight
3.64 kg/ 8.0 lb
Detachable surround speaker
0.72 kg x 2/ 1.6 lb x2
Subwoofer weight
11.10 kg / 24.5 lb
USB port
Type A
USB rating
5 V/ 500 mA
Supported file format
MP3
MP3 codec
MPEG 1 Layer 2/3, MPEG 2 Layer 3, MPEG 2.5 Layer 3
MP3 sampling rate
16 KHz - 48 KHz
MP3 bitrate
80 kbps - 320 kbps
USB Port
USB playback is available in US version. For other versions, USB is for Service only
Bluetooth version
4.2
Bluetooth profile
A2DP V1.2/ AVRCP V1.5
Bluetooth frequency range
2402MHz-2480MHz
Bluetooth Max. transmitting power
13dbm  (EIRP)
Modulation Type
GFSK, π/4 DQPSK, 8DPSK
Wi-Fi network
IEEE 802.11 a/b/g/n/ac (2.4GHz/5GHz)
2.4G Wi-Fi frequency range
2412 – 2472 MHz (2.4GHz ISM Band, USA 11 Channels, Europe and others 13 Channels)
2.4G Wi-Fi Max. transmitting power
20 dBm (EIRP)
Modulation Type
DBPSK, DQPSK, CCK, QPSK, BPSK, 16QAM, 64QAM
5G Wi-Fi frequency range
5.15 - 5.35 GHz, 5.470-5.725 GHz, 5.725 - 5.825 GHz
5G Wi-Fi Max. transmitting power
22 dBm (EIRP)
Modulation Type
QPSK, BPSK, 16QAM, 64QAM, 256QAM
5G Wireless frequency range
5180.0 - 5240.0MHz (Except Europe), 5725.0 - 5825.0MHz
5G Max. transmitting power
13 dBm (EIRP)
Modulation Type
QPSK

Feel like you're right in the scene with 3D surround sound

The JBL Bar 9.1 soundbar brings audio experience of a movie theater into your home with two detachable surround speakers and the added punch of Dolby Atmos® and DTS:X™ 3D sound. With 820 watts of total system power, you can enjoy every Oscar-worthy performance through powerful, crystal-clear audio. Turn up the 10’’ subwoofer for pulse-pounding bass or turn it down and relax with Chromecast and AirPlay music streaming. Immerse yourself in the latest blockbuster or re-live your favorite movie or sport scenes. The most incredible home cinema sound experience is here.

Upgrade your viewing or gaming experience from ordinary to extraordinary. Built-in Dolby Atmos®, DTS:X™ and four upfiring speakers bounce sound up to the ceiling back down to you for an awesome, true 3D sound experience.
Instantly enjoy a true, cinematic 9.1 surround experience. Simply place the two detachable surround speakers behind you. No extra wires, no extra power connections so no extra hassle.
Built-in batteries mean audio freedom. Place the two detachable surround speakers anywhere in your room to enjoy an incredible audio experience. After up to 10 hours of playback, simply dock them to the soundbar to recharge.
With 820 Watts of system output power, you'll hear your movies, games and music like never before. Let the immersive, powerful sound take your viewing or gaming experience to the next level.
Punchy, precise bass from a mighty 10’’ wireless subwoofer brings the action to your action movies and the emotion to your music.
Incredible 4K video resolution deserves incredible sound. The JBL Bar 9.1 soundbar makes the ultimate dynamic duo when paired with your TV.
Built-in Wi-Fi and compatibility with Chromecast and Airplay 2 means you can stream all your favorite online music in high clarity with a simple finger tap.
Not in the mood for a film or game? No problem. With the JBL Bar 9.1 soundbar you can also enjoy wireless music streaming via Bluetooth from your mobile or tablet.

FAQs & How-Tos

10 results
  • BAR 9.1
    Software Update Release Notes
    ------------------------------------------------------------------------
    Version:  V22.01.31.80
    Release Date:  May 19, 2022
    Release Media:  OTA (over the air) Automatic Upgrade and/or USB
    Filename:  JBL Bar9.1 TWS ver 22.01.31.80.zip
    1. Fixed a grouping issue with other Chromecast built-in speakers (read below):
      1. 3rd party Chromecast built-in speakers using a Google SDK less than 1.52GM2 can not be grouped with 1st party Google speakers any longer. This update brings the Bar 9.1 up to 1.52GM2, which means once again, it can be grouped with 1st party Google speakers
    2. Software update resolves the issues with the "Google Home" app if you are using an Android phone (read below):
      1. Speakers with an SDK less than 1.52GM2 set up with a Google Pixel phone need to use a new, additional app called the "Device Utility app" to complete the Wi-Fi setup. After this update, customers may use the Google Home app as normal for Wi-Fi setup
    3. General software and performance improvements:
      1. Sometimes there was a 0.5sec audio drop during ARC streaming with PCM format, now improved!
      2. Import MTK patch to solve continuous distortion after connecting Apple TV to a Sony TV while playing PCM stream in eARC source.

    Note:  This software upgrade is not applicable for JBL Bar 9.1 China version.
    注意:此软件升级不适用于JBL Bar 9.1中国版。

    ------------------------------------------------------------------------
    Version:  V21.23.11.80
    Release Date:  June 8th, 2021
    Release Media:  OTA (over the air) Automatic Upgrade and/or USB
    Filename:  JBL Bar9.1 TWS ver 21.23.11.80.zip

    1.    Improve calibration success rate in some cases.
    2.    Improve compatibility of some “ATMOS” Netflix streaming content. 
    3.    Improve LED Display messages.

    Note:  This software upgrade is not applicable for JBL Bar 9.1 China version.
    注意:此软件升级不适用于JBL Bar 9.1中国版。

    ------------------------------------------------------------------------
    Version:  V21.13.11.80
    Release Date:  April 8, 2021
    Release Media:  OTA (over the air) Automatic Upgrade and/or USB
    Filename:  JBL Bar9.1 TWS ver 21.13.11.80.zip
    • Improves Soundbar Optical, HDMI, and ARC Compatibility with TV.
    • Improves Bluetooth connectivity for mobile devices.
    • Improved LED Display Messages.
    • Bug fix to remove detachable speakers battery level checking due to imprecise readings.
    NOTE:  This software update is not applicable to the JBL BAR 9.1 China version.

    注意:此软件升级不适用于JBL Bar 9.1中国版。

     
  • The Mute+ATMOS combination button press to determine the Battery Status was originally designed for production line testing, not for consumer usage.  We determined that this testing method was inaccurate and began testing using specialized external equipment.  As of Software Version V21.13.11.80, the ability to check Battery Status inaccurately has been removed.

    When charging the satellite speakers you can be confident that the Battery Status is 100% when the LED indicator goes  out.  As well, when the LED begins blinking red, you are at 20% and should recharge or plug in your speakers.
  • To play the surround sound with DOLBY ATMOS or DTS:X, connect your Blu-ray player or other digital device to the HDMI input connector on the soundbar. If the TV support Dolby ATMOS, served over HDMI ARC, just make sure it is selected in the TV setting menu. To select the most suitable amount of sound effect of DOLBY ATMOS and DTS:X, press on the remote control ATMOS level button, to switch between MID, HIGH, LOW or OFF. Note: If your TV has an eARC HDMI input, you can connect your Blu-ray player or other digital device to the HDMI IN connector on the TV.
  • You can enjoy streaming your favorite music over WiFi to your JBL BAR 9.1 Surround by adding it to your network. Turn on your soundbar. Download the Google Home app to your phone. Enable Bluetooth and Location services on your device. Open Google Home app Follow the instructions given in the app. You are now connected to your WiFi network and can enjoy streaming music to your system. The soundbar will now be able to automatically update, to make sure the performance is the best at all times.
  • NOTE: Apple IOS users are not able to find their MAC address in Google Home app due to privacy policies in the USA and European market.

    We advise setting up your device on a less secure network. Log into the router and retrieve the MAC address for your device then add it to your preferred network.

    Instructions below are for Android only

    1. Open your Google Home app Google Home app
    2. Enable Bluetooth User-added image on your device.
    3. Enable Location service User-added image on your Android device.
      1. Remember to "Allow" Google Home to view your location while using the app (You are asked during setup of the Google Home app).
      2. In case you denied access go to Settings User-added image Apps User-added image Google Home User-added image Permissions User-added image Allow to view Location.
    4. When you at selecting the Wi-Fi network from the list of available networks, before tapping on your network you need to get the MAC address.
      1. Tap  the User-added image located top right corner.
      2. In the pop-up menu press "Show MAC address" User-added image Write down the MAC Address.
    part 3User-added imagepart 5

    You can now add the MAC address to your local Wireless router or system if your configuration requires this before installing the device on your network.

    Finding the MAC address after speaker is installed

    1. Open your Google Home app Google Home app.
    2. Tap on  to view your home.
    3. Find your room User-added image.
    4. In the top right corner tap Settings icon User-added image.
    5. ​Scroll down to the bottom of the screen. You will see some system information and the MAC address as well.
  • Prerequisites:
    − Make sure that your room is quiet;
    − Make sure that the soundbar and the two detachable rear speakers are fully in sight of each other, without obstacles in between.
    − Make sure that the left and right rear speakers are properly placed, the L speaker on the left and the R speaker on the right.

    The calibration is done in two steps: Listening zone & Speaker position

    Calibrate the listening zone

    1. Place the detachable rear speakers beside your seating position.


    2. On the remote control, press and hold HDMI until “1-CALIBRATION” is displayed on the soundbar.
    → Countdown starts from 5 to 1.
    → Calibration tone is heard. Audio calibration starts.
    → “CALIBRATING”: Calibration ongoing.
    → “1-DONE”: Calibration of the listening zone is completed successfully.

    Calibrate the speaker position

    1. Place the detachable rear speakers in your desired location.

    2. On the remote control, press and hold HDMI until “2-CALIBRATION” is displayed on the soundbar.
    → Countdown starts from 5 to 1.
    → Calibration tone is heard. Audio calibration starts.
    → “CALIBRATING”: Calibration ongoing.
    → “2-DONE”: Calibration of the speaker position is completed successfully.
    3. To select suitable surround sound level, press repeatedly to switch between high, low or middle (default).

    NOTES:
    − During calibration, all buttons on the remote control are disabled except for STANDBY and HDMI.
    − “SETUP FAILED” is displayed if calibration failed.

  • With our JBL BAR 9.1 Surround there is two types of resets, one is to reset the WiFi settings and last one is to restore factory default settings. Let us walk through each one of them. Resetting WiFi settings Turn on your JBL BAR 9.1 Surround. Press and hold POWER button down for more than 10 seconds. All of your WiFi configuration is lost and you need to reinstall it again. Use the Google Home app to install the device on your WiFi network. Resetting to Factory default settings Turn on your JBL BAR 9.1 Surround Press and hold POWER and SOURCE button for 3 seconds. Your device is now reset. You can now start allover with installing your BAR 9.1 Surround.
  • The Checklist

    Let us walk-through a list of things needed to ensure every requirement is met.

    1. Check your mobile device if that is able to connect to same Wireless network.
    2. Make sure you are within range of your Wireless router.
    3. Check the Wireless signal on your mobile device, does it have a weak signal then move closer to the router.
    4. Try both Wireless network bands 2.4GHz and 5GHz in case one of them are failing.
      1. You will have longer range with 2.4GHz, but less performance and most of the times a crowded network (many devices are using 2.4GHz band).
      2. You will have less interference with 5GHz and higher performance, however, the range of the 5GHz network has shorter range.
    5. Try using a different mobile device, if you have one.
    6. Reboot your Wireless network router and your mobile device.
    Watch the video below for help with setting up your Google Assistant device.

    Wireless Network Extender

    Some houses or apartments can be too big for one Wireless network router to cover it all.
    Let's talk about the issues that might appear with an Extender network.

    1. Network Extenders that will help cover poor signal in your home, often results in poor connection and low speed performance.
    2. Often the Network Extender is a low budget device or not suited for having too many devices attached to it.
    3. Placement of the speaker is crucial as you can put it in a place where it could connect to either main Wireless router or the Extender, that will confuse Wireless network devices.
    4. To solve this issue, try move the speaker closer to main router or have fewer devices attached to your Wireless Extender.
    5. In addition, always use 5GHz connection between your Network extender and main router (best solution and performance).

    One Wireless Network Name (SSID)

    1. You may have set the Wireless Network SSID (Wi-Fi network name) to one big Wireless network (With a main router + Extender(s).
    2. If the JBL LINK device is within range of both Wireless networks (Main router & Extender) then it can get confused with which one to connect to.
    3. To solve this issue, using two different name for your extended network will help with the performance of the JBL LINK Speaker and Google Assistant request.







     

  • You are able to enjoy wireless streaming via Chromecast and Airplay from your devices. This will also give you the opportunity to do multi-room playback. At the same time, the product will be able to automatically update, when there is software improvements available.
  • JBL Bar 9.1 is 884 mm (without the surrounds in charging position). Surrounds add approx. 160 mm on each side, in charging position.

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: +60 377240321

Mon - Fri - 8:00 a.m 5:00 p.m (MYT)

E-mail Us

E-mail Us

365 days a year

We will respond within one business day.

Email Us
Chat with Us

Chat with Us

Mon - Fri - 8:00 a.m 5:00 p.m (MYT)

message

Text Us

Chat with a support agent via SMS at:
601130116117

Mon - Fri: 8:00 am - 5:00 pm (MYT)