How To

Support Overview / How To

How To

448 results
  • Can I connect to multiple devices at the same time on the Everest 310/710 headphones?
    To pair and connect to a different device, press and hold the bluetooth button located on the bottom of the right ear cup until you hear the audible voice stating "looking for device." Make sure the the device you are trying to connect to are in search mode. The headphones should display on "Discoverable Devices" within 2-3 seconds. Choose the Pair option and you should hear the audible voice state "connected" and the LED light should transition into a slow blinking blue light.
  • Can I connect my Soundgear with analog jack cable, or other cables?
    No, Soundgear is wireless Bluetooth only, and needs to be charged to play music. But the BTA 20 transmitter must of course be connected with a cable to the signal source.
  • Can I connect my Control Xstream speakers to 5GHz Wi-Fi?
    Yes, Control Xstream uses both 2.4 GHz and 5 GHZ wi-fi networks.
  • Can I connect multiple devices to the Flip 3 SE?
    No, it's not possible to connect simultaneously from multiple devices to the Flip 3 SE. If you need a new device to pair with the Flip 3 SE, please press the Bluetooth button the Flip 3 SE to enable pairing mode. The Flip 3 SE should be available in the list of Bluetooth devices on your mobile phone/tablet
  • Can I connect more than one Soundgear to the BTA transmitter?
    No. The two Soundgears can connect to the BTA, but not to each other. Also, when using one Soundgear, the use of aptxLL may result in a delay. If you are connected to two, the delay may be more noticeable, since LL is no longer active.
  • Can i connect 3 or more speakers together with JBL Connect?
    No, for now it is only possible to connect two speakers together using the JBL connect feature. Newer JBL products feature JBL Connect+, which allows you to connect > 100 devices simultaneously, these however are not compatible with older JBL products featuring JBL Connect
  • Can I adjust the call tone level on JBL Soundgear?
    While you have an incoming call, and you can hear the call-tone from your SoundGear, simply adjust the SoundGear's call-tone level to the desired intensity, using the SoundGear's volume buttons.
  • Can Horizon wake you up with Bluetooth music from a telephone?
    Yes, if a telephone is connected via Bluetooth to Horizon, this is possible. When adjusting the wake-up timer, there will be an option to select various wake-up tones, or Bluetooth sound. Select Bluetooth as source, while the telephone is playing the music stored locally, or streaming what you want as wake-up music. When the wake-up adjustment is finished, music will be playing over Bluetooth through the Horizon. Press Pause on the source telephone, or press the round selector button (between the two arrow-buttons) on the Horizon to pause the music. Now the system is ready to wake you up with Bluetooth music. When wake-up time arrives, Horizon sends a Play command to the telephone, and music plays via Bluetooth. You can use music that is stored in the phone, use Spotify or play from the cloud. This has been tested with both iPhone 6 and Samsung S6, and should work flawlessly.
  • Can Control Xstream withstand all weather.
    Control Xstream is splash proof (IPX3). Which means that they can be used outside, but they should not be exposed to direct precipitation.
  • Can Apple's Siri assistant be activated from the headphone remote?
    No, this is not possible. Siri is activated by pressing the play-button for some seconds. Since the play-button on the headphone doubles as on/off button, pressing and holding it will simply turn the headphone off.
  • Call Information
    To take a phone call, tap the center button of the right or left ear for 1 second. To hang up a call, tap and hold the center button for 1 second. To ignore a call, tap and hold center button for 3 seconds until music resumes. You may also use the ear buds in MONO or STEREO mode which allows you to make a call or listen to music on either bud independently.
  • Boombox 2 Firmware Version Information
    A new firmware version has been released for the Boombox 2 (Version 0.4.4.0), below is a list of improvements:
    1. Improvements to Bluetooth connection stability.
    2. Support for PartyBoost under aux-in connection.
    3. Improvements for switching between PartyBoost and Stereo mode.
    4. Improvements to firmware update stability with iOS.
    5. Improvements to the stability of switching music between aux-in and Bluetooth connection.

    The firmware update is installed as an OTA update:
    1. Download and install the JBL Portable app from the Google Play/App Store, or simply update the app if you have already downloaded it.
    2. Connect your Boombox 2 to your phone/tablet through Bluetooth.
    3. Open the JBL Portable app and wait for the Boombox 2 to appear.
    4. On the Boombox 2 screen, select settings (gear cog symbol).
    5. Proceed with installing the firmware update.
< 1 ... 33 34 35 36 37 38 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: +60 377240321

Mon - Fri - 8:00 a.m 5:00 p.m (MYT)

E-mail Us

E-mail Us

365 days a year

We will respond within one business day.

Email Us
Chat with Us

Chat with Us

Mon - Fri - 8:00 a.m 5:00 p.m (MYT)

message

Text or Whatsapp us

Chat with a support agent via SMS at:
+60 113 011 6117

Or chat via Whatsapp at:
+60 169 317 728

Mon - Fri: 8:00 am - 5:00 pm (MYT)