ON AIR WEM 1
Wireless Expansion Module
Vendido desde 2008 hasta ahora
Hecho en: | China |
---|
Empezando con su ON AIR WEM 1
Documentos y descargas
Especificaciones del producto
- Included Mounting Hardware
- 1 Front
- Series
- Wireless
- Audio Frequency Range
- (+0dB, –1dB) 20Hz – 20kHz
- Amplifier Power Output
- 50 per channel
- Audio Sensing Turn-On/Turn-Off
- Standby mode after approximately 10 minutes, when no signal is detected from your system. The WEM-1 will then power on instantly when a signal is detected.
- Signal-to-Noise Ratio
- 80dBA
- Receiver Module Width (in)
- 6-3/16
- Transmitter Module Width (in)
- 6
- Receiver Module Depth (mm)
- 116
- Receiver Module Width (mm)
- 158
- Receiver Module Weight (lb)
- 0.9
- Receiver Module Height (in)
- 1-1/8
- Receiver Module Depth (in)
- 4-5/8
- Transmitter Module Weight (kg)
- 0.3
- Transmitter Module Depth (in)
- 3-7/8
- Transmitter Module Height (in)
- 1-1/8 (3-3/4 high with antenna extended)
- Receiver Module Weight (kg)
- 0.4
- Receiver Module Height (mm)
- 29 (95 high with antenna extended)
- Transmitter Module Weight (lb)
- 0.6
- Speaker Output Connections
- 1 Rear
- Subwoofer Output Connection
- 1 Rear
- Speaker-Level Input Connections
- 1 Rear
Surrounding yourself with sound doesn’t have to mean wires everywhere and more holes in your walls, floors or ceilings. The JBL® WEM-1 sets your speakers free. It has a 50-watt-per-channel amplifier and receives crisp signals from 70 ft away. Its optimal-performance, proprietary system delivers JBL sound in an easy-setup, clutter-free system.
The JBL® WEM-1 system lets you add JBL® Pro sound to any room in your house without running messy wires. It connects to virtually any system and speakers – and makes any speaker wireless. You get the music you want everywhere, without the typical trouble and expense.
Could your home theater system use more powerful audio? The WEM-1 lets you add surround speakers without running wires across your room. It also lets you enjoy your ITunes library anywhere in your home with the same ease – just connect it to your computer.
The WEM-1 is built around a 2.4GHz proprietary system and offers a four-position ID code selector that ensures optimal performance. Professionals who make music and manage audio for a living want JBL® technology in their studios, theaters and concert halls. Don’t you?
You’ll have a choice of EQ positions that's compatible with the following JBL® loudspeakers: CSB55, CST55, CS600 satellites, CS400 satellites, Control NOW and Control Monitor. And the WEM-1 accepts virtually any audio source, including your PC, A/V receiver, iPod or other portable music devices.
This small, sleek system can go anywhere. The transmitter and receiver/amplifier is wall-mountable horizontally and vertically, and all the brackets are included. Also, the receiver includes a convenient vertical stand for wire management.
A convenient IR remote control is included with this system, offering the ability to control volume output, muting and input selection.
Imágenes y vídeos
¿No encuentras lo que buscas?
Llámanos
Habla con un experto sobre nuestros productos
Llámanos a este número:
55-5328-1021
Lunes - Viernes: 09:00 AM -06:00 PM (Hora Centro)
Envíanos un correo electrónico
¡Estamos aquí de lunes a viernes para responder sus correos lo antes posible!