



JBL Bar 2.1 Deep Bass
The elegant JBL BAR 2.1 Deep Bass Soundbar features Bluetooth, Optical, HDMI in and ARC connectivity with both Dolby Digital and JBL Surround Sound modes. Its room filling 300 Watts of total system power delivers an immersive experience by way of its four powerful full range drivers, two 1” tweeters, and JBL engineered 6.5” subwoofer. On-board Bluetooth allows you to use the Bar 2.1 for streaming music from your favorite device in addition to its ability to deliver a real JBL theater experience when coupled with your flat panel TV. Its elegant and low profile design will look amazing below your TV.
Product Specifications
General Specifications
Model | Bar 2.1 Deep Bass CNTR (Soundbar Unit), Bar 2.1 Deep Bass SUB (Subwoofer Unit) |
---|---|
Power supply | 100 - 240V AC, ~ 50/60Hz |
Total speaker power output (Max. @THD 1%) | 300W |
Output power (Max. @THD 1%): | |
2 x 50W (Soundbar); 200W (Subwoofer) | |
Transducer | 4 x race track drivers + 2 x 1” tweeter (Soundbar); 6.5” (Subwoofer) |
Soundbar and Subwoofer standby power | <0.5W |
Operating temperature | 0°C - 45°C |
HDMI Video output (With Audio return channel) | 1 |
HDMI version | 1.4 |
Audio Specifications
HDMI Video input | 1 |
---|---|
Frequency response | 40Hz - 20KHz |
Audio inputs | 1 Optical, Bluetooth, USB (USB playback is available in US version. For other versions, USB is for Service only.) |
Dimension Specifications
Dimensions (W x H x D): | |
---|---|
965 x 58 x 85 (mm) / 38” x 2.28” x 3.35” (Soundbar); | |
240 x 240 x 379 (mm) / 8.9” x 8.9” x 14.6” (Subwoofer) | |
Weight | 2.16 kg (Soundbar); |
5.67 kg (Subwoofer) | |
Packaging dimensions (W x H x D) | 1045 x 310 x 405mm |
Packaging weight (Gross weight) | 10.4kg |
Control Connect Specifications
USB port | Type A |
---|---|
USB rating | 5V DC/ 0.5A |
Supporting file format | mp3, wav |
MP3 Codec | MPEG 1 Layer 2/3, MPEG 2 Layer 3, MPEG 2.5 Layer 3 |
MP3 sampling rate | 16KHz - 48 KHz |
MP3 bitrate | 80kbps - 320kbps |
WAV sample rate | 16KHz - 48 KHz |
WAV bitrate | Up to 3000kbps |
Bluetooth version | 4.2 |
Bluetooth profile | A2DP V1.3, AVRCP V1.5 |
Bluetooth frequency range | 2402MHz-2480MHz |
Bluetooth Max. transmitting power | <10dBm (EIRP) |
Modulation Type | GFSK, π/4 DQPSK, 8DPSK |
5G Wireless frequency range | 5736.35 - 5820.35MHz |
5G Max. transmitting power | <9dBm (EIRP) |
Modulation Type | π/4 DQPSK |
Documents & Downloads
Spec Sheets
Manuals
Quick Start Guide
Gallery







Videos
What’s in the Box
- Soundbar
- Wireless subwoofer
- Remote control with batteries
- Power cords (up to 8pcs depending on region SKUs)
- HDMI cable
- Wall-mount bracket kit with screws
- Quick start guide
- Warranty card
- Safety sheet

FAQs & How-Tos
How to restore factory default settings
To reset your JBL Bar 2.0 or 2.1 back to factory default settings, follow the steps below.
- Turn on your JBL Bar 2.0 or 2.1
- Press SOURCE and POWER buttons on top of the bar at the same time for more than 3 seconds.
- Your soundbar will now power off and on again.
Was this helpful?
Thank you for your feedback!
What are the differences between BAR 2.1 and BAR 2.1 Deep-Bass
In case you wonder what the differences are between JBL BAR 2.1 and JBL BAR 2.1 Deep Bass, the newest model, then keep reading to find out more!
Our JBL BAR 2.1 Deep Bass is an improvement to the BAR 2.1.
Here is what you will get extra:
Our JBL BAR 2.1 Deep Bass is an improvement to the BAR 2.1.
Here is what you will get extra:
- Improved sound quality.
- Deeper and richer bass.
- A new modern design change.
Was this helpful?
Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call us now at:
+959-97-400-5050
TMW Address : No. (7/B), Maharsi Sarsana Yakethar street, Bahan Tsp, Yangon, Myanmar
Mon - Sat - 8:00 a.m 5:00 p.m