


JBL Tune 215BT
Product Specifications
General Specifications
Driver size (mm) | 12.5 |
---|---|
Number of Microphones | 1 |
Audio Specifications
Driver sensitivity at 1kHz/1mW (dB) | 118 dB SPL@ 1kHz 1mW |
---|---|
Dynamic frequency response range (Hz) | 20 Hz – 20 kHz |
Impedance (ohms) | 20 |
Control Connect Specifications
Bluetooth version | 5.0 |
---|---|
Bluetooth profiles | HFP 1.7, A2DP 1.3, AVRCP 1.6 |
Bluetooth frequency | 2.400 GHz - 2.4835 GHz |
Bluetooth transmitted modulation | GFSK, _x005F_x001F_/4 DQPSK, 8DPSK |
Bluetooth transmitter power | < 6 dBm |
Documents & Downloads
Spec Sheets
Quick Start Guide
Gallery






What’s in the Box
- 1 x Pair of Tune 215BT headphones
- 1 x Charging cable
- 1 x Quick Start Guide
- 1 x Warning card
- 1 x Warranty card
- 1 x Safety sheet

FAQs & How-Tos
The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:
• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.
• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device
Always get the latest driver version available for your Computer/PC/Laptop.
To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.
The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
If you are experiencing issues with your headphones' Bluetooth disconnecting and reconnecting while on standby, there is a new Firmware Update app to resolve this issue. Start by downloading the app "JBL Firmware Update" (see links below).
Google Play Store: https://play.google.com/store/apps/details?id=com.jbl.tune.update
App Store: https://apps.apple.com/gb/app/jbl-firmware-update/id1548227663
Once downloaded, you can update your headphones firmware from there.
Below you can see step by step images of the update process.
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call us now at:
+959-97-400-5050
TMW Address : No. (7/B), Maharsi Sarsana Yakethar street, Bahan Tsp, Yangon, Myanmar
Mon - Sat - 8:00 a.m 5:00 p.m