JBL Quantum 600
Wireless over-ear performance PC gaming headset with surround sound and game-chat balance dial
Sold from 2020 until now
Documents & Downloads
Product Specifications
- Driver size (mm)
- 50
- Active Frequency Response
- 20 Hz – 20 kHz
- Driver sensitivity at 1kHz/1mW (dB)
- 100
- Dynamic frequency response range (Hz)
- 20 Hz - 20 kHz
- Impedance (ohms)
- 32
- Passive Frequency Response
- 20 Hz – 20 kHz
- Audio Cable Length (ft)
- 3.9
- Audio Cable Length (m)
- 1.2
- Ear Cup Depth (cm)
- 2.7
- Ear Cup Depth (in)
- 1.1
- Ear Cup External Height (cm)
- 9.7
- Ear Cup External Height (in)
- 3.8
- Ear Cup External Width (cm)
- 8.7
- Ear Cup External Width (in)
- 3.4
- Ear Cup Internal Height (cm)
- 6
- Ear Cup Internal Height (in)
- 2.4
- Ear Cup Internal Width (cm)
- 4.6
- Ear Cup Internal Width (in)
- 1.8
- Charging Cable Length (m)
- 1.5
- Charging Cable Length (ft)
- 4.9
- Weight (g)
- 346
- Weight (oz)
- 12.2
- 2.4G Wireless transmitter power
- <4 dBm
- 2.4G Wireless modulation
- π/4-DQPSK
- 2.4G Wireless carrier frequency
- 2403.35 MHz - 2479.35 MHz
- Charging time (hours from empty)
- 2
- Maximum play time (hours)
- 14
- Audio cable
- Yes
- Built-in Microphone
- Yes
- Fabric headband
- Yes
- Rechargable battery
- Yes
- Wireless
- Yes
- Replaceable Earpads
- Yes
Sound is Survival
Designed for immersion and performance, the JBL Quantum 600 2.4GHz wireless gaming headset gives you a clear edge over the competition with accurate and immersive sound. JBL QuantumSURROUND™ sound replicates a wider, more realistic spatial environment on your PC, so you never miss a detail. The voice focus boom mic enables clear communication with other players, while a DISCORD-certified game audio-chat balance dial allows you to easily balance chat and game audio levels. Leather-wrapped, memory foam ear cushions keep you comfortable, while a 14-hour (max) battery life enables cord-free, long-lasting gaming sessions. Dominate your opponents and gain a clear audio advantage with JBL Quantum 600 headset.
FAQs & How-Tos
-
Yes, it's 14 hrs with RGB off. You can also find the details on the box. Was this helpful? Thank you for your feedback! -
Yes. You can configure the volume of the mic monitoring in JBL QuantumENGINE. And the default setting of the mic monitoring is set of “OFF”. Was this helpful? Thank you for your feedback! -
JBL Quantum 400 and ONE are compatible with USB C to A cable to enjoy PS4 console with RGB Lighting on, and Quantum 600 and 800 with wireless-enabled by USB dongle also gives lighting moment on PS4 console games.
*NOTE that RGB will not light up when connecting with 3.5mm cable to any device (PC, Console, Mobile, etc.) because the cable doesn't have power enough for the RBG lighting.Was this helpful? Thank you for your feedback! -
You might have to add a USB extension dock to get the JBL Quantum 350/600/800/810 dongle as close to the headset, or place the common sources of interference (e.g. routers, Wi-Fi speakers etc.) as far from the JBL Quantum 350/600/800/810 dongle.
Was this helpful? Thank you for your feedback! -
The battery is charged using an included USB-A to USB-C USB fabric cable. It will be fully charged for 2 hrs. Note, this cable is only for charging the battery, it will not deliver audio.Was this helpful? Thank you for your feedback!
-
Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.
How to check your PC settings for the correct recording device
1. Go to Control Panel
2. Select Hardware and Sound
3. Click on Sound
3 Select Recording
4. Make sure to select the proper recording device.-
Right-click on it Quantum headset.
-
Now select "Set Default Device" or Select "Default Communication Device"
5. Check the microphone levels by right-click on your Quantum headset. Then click on Properties
6. Choose Levels.
7. Adjust accordingly.
Please also make sure the volume control on the headset is turned up. Rotate the volume wheel on your headset to increase the volume.
Check that your headset's Game-Chat balance dial and ensure that the balance is correct, you might refer to the screenshot below from the QuantumEngine PC software.
If you still cannot hear the game or music audio, or if the volume is still very low, check if the TalkThrough is activated via the QuantumEngine software.
Finally, you can also do a short press on the Smart Ambient button on the headset (if your headset, has this feature)Was this helpful? Thank you for your feedback! -
-
Yes, you can adjust the game and chat audio balance by rotating the dial-up and down. When you rotate the dial, you'll feel a notch that indicates the balance is 50% game and 50% chat. The slider on Quantum ONE is different and has no notch but instead a visual indicator.Was this helpful? Thank you for your feedback!
-
It is offering low-latency wireless connectivity via a 2.4Ghz signal that is enabled by a USB dongle included in the box. Turn on the slider, then it automatically connect to the dongle. If you loss the connectivity with the dongle, power on with the slider and hold on for 5 seconds and press and hold the dongle to make sure the pairing until listening to the tone. Was this helpful? Thank you for your feedback! -
You can clean it by wiping it gently with a damp cloth. Take extra care not to let water leak into the speaker chamber, as it will damage the speaker drivers.Was this helpful? Thank you for your feedback!
-
Yes. You can configure the volume of the mic monitoring in JBL QuantumENGINE. The default setting of the mic monitoring is "OFF”.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call us now at:
+959-97-400-5050
TMW Address : No. (7/B), Maharsi Sarsana Yakethar street, Bahan Tsp, Yangon, Myanmar
Mon - Sat - 8:00 a.m 5:00 p.m
