JBL LSR6332 (Right Side)

JBL LSR6332 (Right Side)

Linear Spatial Reference Studio Monitor System

JBL LSR6332 (Right Side) 제품 사용 시작하기

Product Registration

제품 등록하기

이 제품을 소유하고 계신가요? 여기에서 등록하세요! 그리고 보증 또는 서비스를 간편하게 요청하세요

지금 등록

문서 및 다운로드

제품 사양

Input Impedance
4 ohm (Nominal)
Anechoic Sensitivity
93 dB/2.83 V/1 m (90 dB/ 1 W/ 1 m)
Frequency Response
+1. -1.5 dB (60 Hz – 22 kHz)
Low Frequency Extension
54 Hz (-3 dB) ; 35 Hz (-10 dB)
Enclosure Resonance Frequency
33 Hz
Long Term Maximum Power (IEC265-5)
200 W continuous average; 800 W peak
Recommended Amplifier Power
150 W - 1000 W (rating into 4-ohm load)
High Frequency Control
0 dB, -1 dB (2.5 to 20 kHz)
Distortion, 96 dB SPL, 1 m
2nd Harmonic (below 120 Hz) <1.5% ; 3rd Harmonic (below 120 Hz) <1% ; 2nd Harmonic (120 Hz to 20 kHz) <0.5% ; 3rd Harmonic (120 Hz to 20 kHz) <0.4%
Distortion, 102 dB SPL, 1 m
2nd Harmonic (below 120 Hz) <1.5% ; 3rd Harmonic (below 120 Hz) <1% ; 2nd Harmonic (80 Hz to 20kHz) <1% ; 3rd Harmonic (80 Hz to 20kHz) <1% (<0.4%, 250 Hz - 20 kHz)
Power Nonlinearity
30 W (20 Hz to 20 kHz) <0.4 dB ; 100 W (20 Hz to 20 kHz) <1.0 dB
Low-Mid Frequency Crossover
4th Order Acoustic Linkwitz-Riley 250 Hz
Mid-High Frequency Crossover
4th Order Acoustic Linkwitz-Riley 2.2 kHz
Width
25.0 in (63.5 cm)
Height
15.5 in (39.4 cm)
Depth
11.5 in (29.2 cm)
Net Weight
45 lbs (20.4 kg)

Mix without boundaries

If you need a larger monitor with high SPL, for mid-field, soffit or behind the screen applications, the LSR6332 is your choice. This three-way non-powered system can handle 200 Watts continuous pink noise/800 Watts peak and will generate 112 dB SPL at 1 meter. The LSR6332 incorporates a 12” Neodymium Differential Drive® NDD™ dual coil woofer, 5” Kevlar™ midrange speaker and 1” titanium composite tweeter. The system is exceptionally flat, +1 dB/ –1.5 dB from 60 Hz to 22 kHz with LF extension to 35 Hz. User features include a –1 dB HF level setting, and dual 5-way binding posts for bi-wire capability. The award-winning JBL LSR6300 Series professional loudspeakers deliver the exceptional accuracy and performance needed in demanding music, post audio and broadcast applications. Each model provides ultra-flat response, extraordinary SPL capability and technology to optimize performance in any size production environment. All models are shielded, ready for mounting and THX® pm3™ approved.

Ensures flatter response at the mix position
For extended low frequency response and low power compression
For extended frequency response and low distortion
For low enclosure resonance and stable inertial ground
Eliminates port turbulence and reduces port compression
For use near video monitors
Allow mounted installation
May be rotated by user for horizontal or vertical orientation

찾는 제품이 없나요?

연락하기

연락하기

제품 전문가에게 지금 전화하십시오. 02-553-3494

월~금, 오전 9시 오후6시