전천후

Our Control X Wireless speaker has two different patterns for switching on, when using either battery or AC power. When using battery, turning on one speaker in either stereo mode or association mode (4 speakers connected), all will turn on simultaneously, no matter which is primary or secondary. When connected to AC power, switch on the primary speaker in stereo or associated mode, and the secondary speakers will follow. If you have associated speakers stereo or 4 speakers connected, then you have to press primary speaker's power button for more than 2 seconds, then the primary will send signal to secondaries, and they will wake up. It takes approx. 30-60 seconds before all are switched on. If your press it too short (less than 2 seconds), the primary speaker will not "pair" the secondary speakers together. Switch off the primary and start over again.

No, you can only have one activate device connected to the speaker. Please un-pair your current Bluetooth device, then connect with another device if needed.

Yes, Control Xstream is a Chromecast device that allows you to cast music content via your Chrome browser. However, the JBL Control Xstream is not made for video purposes, because there will be delay between sound and image.

This speaker will go to standby mode after 10 minutes inactivity. It turn on when you start playing to it again.

Our Control X Wireless speaker has two different patterns for switching on, when using either battery or AC power. When using battery, turning on one speaker in either stereo mode or association mode (4 speakers connected), all will turn on simultaneously, no matter which is primary or secondary. When connected to AC power, switch on the primary speaker in stereo or associated mode, and the secondary speakers will follow. If you have associated speakers stereo or 4 speakers connected, then you have to press primary speaker's power button for more than 2 seconds, then the primary will send signal to secondaries, and they will wake up. It takes approx. 30-60 seconds before all are switched on. If your press it too short (less than 2 seconds), the primary speaker will not "pair" the secondary speakers together. Switch off the primary and start over again.

Yes, on the master speaker (the one with playback buttons), simply press the Reverse and Forward Play buttons at the same time for 3 seconds. Please note that after you have performed the reset procedure, master and secondary speakers are no longer connected. Go to the owner's manual page 4, the section "speaker association", to pair the secondary and master again.

The system features an automatic mute function that becomes active after 10 seconds of no signal activity. Since the output level varies greatly between different genres and recording levels, it is highly recommended to set your source volume levels above 4, or preferably at mid-level, then controlling the listening level using the volume control provided in the speaker system.

No, you can only have one activate device connected to the speaker. Please un-pair your current Bluetooth device, then connect with another device if needed.

Yes, just be aware that you are responsible for correct installation when using 3rd party wall mounts. The included wall-mounting kit in the box fits perfectly and is good for outdoor or indoor use.

No, you can certainly take off the front grill if you like the design of the speaker without the grill. However, do not touch the tweeters or woofers, as they can be damaged if you touch them. For ourdoor purposes, we do not recommend taking off the front grill.

The JBL Control X is built for outdoor and indoor purposes. If you are placing the JBL Control X outdoor, please be aware that it should not be exposed to directly to the elements (rain, snow, sunlight). We advise you to place the speaker under a roof so the connections on the back won't be exposed to outside sources. If you have placed it correctly under a roof, they can outlast all types of weather.