JBL BAR 9.1 True Wireless Surround with Dolby Atmos®

JBL BAR 9.1 True Wireless Surround with Dolby Atmos®

Dolby Atmos® 및 서라운드 스피커가 적용된 9.1 채널 사운드바 시스템

JBL BAR 9.1 True Wireless Surround with Dolby Atmos® 제품 사용 시작하기

JBL BAR 9.1 True Wireless Surround with Dolby Atmos® 제품 사용 시작하기

빠른 시작 안내

쉽게 따라할 수 있는 빠른 시작 가이드로 즉시 실행하기

Product Registration

제품 등록하기

이 제품을 소유하고 계신가요? 여기에서 등록하세요! 그리고 보증 또는 서비스를 간편하게 요청하세요

지금 등록

문서 및 다운로드

제품 사양

사운드 시스템
5.1.4 채널
전원 공급 장치
100~240V AC, ~50/60Hz
배터리 충전 시간 3 시간
총 스피커 전원 출력(최대 @THD 1%)
820W
사운드바 출력 전원(최대 @THD 1%)
400W
서라운드 스피커 출력 전원(최대 @THD 1%)
2 x 60W
서브우퍼 출력 전원(최대 @THD 1%)
300W
사운드바 변환기
레이스트랙 드라이버 4 개 + 업파이어링 풀레인지 드라이버 2개 + 3 x 0.75인치 트위터
서라운드 변환기(개당)
업파이어링 풀레인지 드라이버개 + 0.75인치 트위터
서브우퍼 변환기
10”
작동 온도
0°C~45°C
305 x 440 x 305mm/12.0 x 17.3 x 12.0인치 (서브우퍼)
3.64kg/ 8.0 lb(사운드바)
0.72kg x 2/ 1.6 lb x2 (탈착식 서라운드 스피커)
11.10kg/ 24.5 lb (서브우퍼
사운드바 대기(모든 무선 연결이 비활성화된 경우) < 0.5 W
네트워크 대기(사운드바) < 6.0 W
네트워크 대기(서브우퍼) < 2.0 W
대기 전환 시간
<10분
HDMI 비디오 입력
1
HDMI 비디오 출력(향상된 Audio Return Channel, eARC)
1
HDMI HDCP 버전
2.3
최대 SPL
103dB
주파수 응답
34Hz~20KHz
오디오 입력
1 - Optical, Bluetooth, Chromecast, AirPlay2, USB
변조 형식
QPSK, BPSK, 16QAM, 64QAM, 256QAM
5G 무선 주파수 범위
5180.0 MHz~5240.0 MHz, 5725.0 MHz~5825.0 MHz
5G 최대 송신 전력
13 dBm(EIRP)
변조 형식
QPSK
884 x 62 x 120mm/34.8 x 2.4 x 4.7인치 (사운드바)
173 x 60 x 120mm/6.8 x 2.4 x 4.7인치 (탈착식 서라운드 스피커, 개당)
USB 포트
A형
USB 정격
5V/ 500mA
지원 파일 형식
MP3
MP3 코덱
MPEG 1 Layer 2/3, MPEG 2 Layer 3, MPEG 2.5 Layer 3
MP3 샘플링 속도
16KHz~48KHz
MP3 비트율
80kbps~320kbps
(USB 재생은 미국 버전만 가능. 기타 버전에서 USB는 서비스 전용입니다.)
Bluetooth 버전
4.2
Bluetooth 프로필
A2DP V1.2, AVRCP V1.5
Bluetooth 주파수 범위
2402MHz~2480MHz
Bluetooth 최대 송신 전력
13 dBm(EIRP)
변조 형식
GFSK, π/4 DQPSK, 8DPSK
Wi-Fi 네트워크
IEEE 802.11 a/b/g/n/ac(2.4GHz/5GHz)
2.4G Wi-Fi 주파수 범위
2412~2472 MHz(2.4GHz ISM 밴드, 미국 11개 채널, 유럽 및 기타 지역 13개 채널)
2.4G Wi-Fi 최대 송신 전력
20dBm(EIRP)
변조 형식
DBPSK, DQPSK, CCK, QPSK, BPSK, 16QAM, 64QAM
5G Wi-Fi 주파수 범위
5.15GHz~5.35GHz, 5.470GHz~5.725GHz, 5.725GHz~5.825GHz
5G Wi-Fi 최대 송신 전력
22dBm(EIRP)

마치 3D 서라운드 사운드와 함께 하는 기분을 느껴보세요

JBL Bar 9.1 사운드 바는 2개의 탈착식 서라운드 스피커와 Dolby Atmos® 및 DTS:X™ 3D 사운드의 타격감을 적용해 영화관의 오디오를 집에서도 경험할 수 있습니다. 820W의 시스템 전체 출력 덕분에 파워풀하고 선명한 오디오 음색으로 오스카에 버금가는 모든 공연을 즐길 수 있습니다. 10" 서브우퍼의 볼륨을 높여 강력한 저음을 경험하거나 볼륨을 낮추고 Chromecast 및 AirPlay 음악 스트리밍으로 안락한 휴식을 취하세요. 최신 블록버스터 영화에 몰입하거나 선호하는 영화 또는 스포츠 장면을 다시 경험하세요. 놀라운 홈 시네마 사운드 경험이 여기에 있습니다.

평범했던 시각적 경험과 게임 환경을 특별하게 만들어 보세요. 내장형 Dolby Atmos®, DTS:X™ 및 네 개의 업파이어링 스피커를 통해 사운드가 천장에서 감상자에게 다시 전달되어 최고의 진정한 3D 서라운드 경험을 선사합니다.
영화관에 온 듯한 진정한 9.1 서라운드 경험을 바로 즐기세요. 2개의 탈착식 서라운드 스피커를 뒤에 놓기만 하면 됩니다. 전선이나 전원을 연결하지 않아도 되기 때문에 번거로움이 없습니다.
내장 배터리는 오디오의 자유를 의미합니다. 2개의 탈착식 서라운드 스피커를 실내 어디에나 자유롭게 배치하고 가장 놀라운 오디오 경험을 즐기세요. 10시간의 재생 후 스피커를 사운드바에 도킹해 간단하게 충전할 수 있습니다.
820W 시스템 출력으로 이전과는 전혀 다른 영화와 게임, 음악을 경험해보세요. 몰입감을 높여주는 강력한 사운드로 시각적 경험과 게임 환경을 한 차원 높여보세요.
강력한 10" 무선 서브우퍼에서 제공되는 효과적이고 정확한 저음이 액션 영화를 액션 영화답게 만들고, 음악이 더욱 풍성하게 들리도록 합니다.
놀라운 4K 비디오 해상도에 걸맞은 놀라운 사운드를 선사합니다. JBL Bar 9.1 사운드바는 TV와 페어링해야만 그 진가를 발휘합니다.
내장 WiFi와 Chromecast 및 Airplay 2와의 호환성 덕분에 간단한 손가락 터치만으로 좋아하는 모든 음악을 온라인에서 스트리밍할 수 있습니다.
영화를 볼 기분이 아니라도 걱정하지 마세요. JBL Bar 9.1 사운드바를 사용하면 휴대폰이나 태블릿에서 Bluetooth 연결을 통해 무선으로 음악을 스트리밍할 수 있습니다.

FAQ 및 사용 방법

3 카운트 결과
  • To play the surround sound with DOLBY ATMOS or DTS:X, connect your Blu-ray player or other digital device to the HDMI input connector on the soundbar. If the TV support Dolby ATMOS, served over HDMI ARC, just make sure it is selected in the TV setting menu. To select the most suitable amount of sound effect of DOLBY ATMOS and DTS:X, press on the remote control ATMOS level button, to switch between MID, HIGH, LOW or OFF. Note: If your TV has an eARC HDMI input, you can connect your Blu-ray player or other digital device to the HDMI IN connector on the TV.
  • Prerequisites:
    − Make sure that your room is quiet;
    − Make sure that the soundbar and the two detachable rear speakers are fully in sight of each other, without obstacles in between.
    − Make sure that the left and right rear speakers are properly placed, the L speaker on the left and the R speaker on the right.

    The calibration is done in two steps: Listening zone & Speaker position

    Calibrate the listening zone

    1. Place the detachable rear speakers beside your seating position.


    2. On the remote control, press and hold HDMI until “1-CALIBRATION” is displayed on the soundbar.
    → Countdown starts from 5 to 1.
    → Calibration tone is heard. Audio calibration starts.
    → “CALIBRATING”: Calibration ongoing.
    → “1-DONE”: Calibration of the listening zone is completed successfully.

    Calibrate the speaker position

    1. Place the detachable rear speakers in your desired location.

    2. On the remote control, press and hold HDMI until “2-CALIBRATION” is displayed on the soundbar.
    → Countdown starts from 5 to 1.
    → Calibration tone is heard. Audio calibration starts.
    → “CALIBRATING”: Calibration ongoing.
    → “2-DONE”: Calibration of the speaker position is completed successfully.
    3. To select suitable surround sound level, press repeatedly to switch between high, low or middle (default).

    NOTES:
    − During calibration, all buttons on the remote control are disabled except for STANDBY and HDMI.
    − “SETUP FAILED” is displayed if calibration failed.

  • With our JBL BAR 9.1 Surround there is two types of resets, one is to reset the WiFi settings and last one is to restore factory default settings. Let us walk through each one of them. Resetting WiFi settings Turn on your JBL BAR 9.1 Surround. Press and hold POWER button down for more than 10 seconds. All of your WiFi configuration is lost and you need to reinstall it again. Use the Google Home app to install the device on your WiFi network. Resetting to Factory default settings Turn on your JBL BAR 9.1 Surround Press and hold POWER and SOURCE button for 3 seconds. Your device is now reset. You can now start allover with installing your BAR 9.1 Surround.

찾는 제품이 없나요?

연락하기

연락하기

제품 전문가에게 지금 전화하십시오. 02-553-3494

월~금, 오전 9시 오후6시