How To

지원 개요 / How To

How To

74 카운트 결과
  • Quantum 200은 어떤 플랫폼에서 사용할 수 있습니까?
    JBL Quantum 200은 PC, PlayStation, Xbox, Nintendo Switch, 모바일, Mac 및 VR과 호환됩니다.
  • Quantum Duo 및 헤드폰과 USB 연결
    스크린 등에 내장된 USB 스플리터 및 익스텐더를 사용하지 마십시오. 소리의 드롭아웃 및 헤드셋의 마이크에서 신호가 약할 수 있습니다. 가능하면 항상 컴퓨터에 직접 연결하거나 단일 연장 코드를 사용하십시오.
  • Quantum 헤드폰에 소리가 나지 않음

    헤드셋 볼륨 컨트롤이 켜져 있는지 확인하십시오. 헤드셋의 볼륨 휠을 돌려 볼륨을 높이십시오. USB 동글을 사용하는 경우, 제어판 > 소리 > 재생에서 올바른 재생 장치가 선택되어 있는지 확인하십시오. 올바른 재생 장치를 선택하고, 마우스 오른쪽 단추를 클릭한 다음, "기본 장치로 설정"을 선택하십시오. 컴퓨터 볼륨 수준을 확인하여 음소거 상태거나 완전히 꺼져 있지 않은지 확인하십시오.

  • Reset Information
    To reset the headphones, power on the headphones and plug in the USB cable into a USB charger or USB port. Paired mobile devices should disconnect and the led should be constant white. When unplugging the USB cable, the headphones will power off. When manually powering on the headphones, and the last connected mobile phone is not in range, the headphones will revert to Bluetooth Pairing mode ( blue led will blink ) after 5 seconds.
  • Supported Platforms

    The JBL Quantum 300 headset is compatible with PC, PlayStation, Xbox, Nintendo Switch, Mobile, Mac and VR.
    You can also use the included USB dongle on PC, PlayStation and Mac.

  • TalkThru Technology
    To activate TalkThru Technology, press the LEFT ear for a short press for 1 Second which allows you to clearly hear others for quick conversations without removing headphons. Music volume level should lower when TalkThru is engaged. Press again for 1 second to turn off Talk Thru.
  • There is no sound from my soundbar. How do I fix it?
    Common fixes:
    (1) Make sure that the soundbar is not muted.
    (2) Select the correct audio input source on the remote control.
    (3) Check the connections to your TV or other devices
    (4) Perform a reset if none of the above is working. 
    (4.1) Press and hold VOL -, VOL +, and Source buttons to perform a reset.
     
  • TWS Mode Capabilities and Restrictions
    You can connect two of the same Partybox models (e.g. 2 x Partybox 310, or 2 x Partybox 100) together in TWS Mode by pressing and holding the Bluetooth button on both speakers for 5 seconds, or by pressing the dedicated TWS buttons on the rear panels of both speakers on the Partybox 110, 310 and 710. It is possible to pair two different Partybox models together using a wired connection (e.g. 1 x Partybox 310 and 1 x Partybox 100). It is also possible to pair two Partybox different models wirelessly in Party mode, however this is only possible with the newer Partybox models - the Partybox 110, 310 and 710. The Partybox 200 & 300 can be paired in TWS mode as they are the same model apart from the presence of a battery in the Partybox 300. If you connect an instrument or microphone to one Partybox speaker while using TWS, the instrument or microphone connected to one speaker will be reproduced by this speaker alone. You will not hear the instrument or microphone in both speakers. If it is necessary to have instruments reproduced by two or more PartyBox speakers, it is possible to use an RCA or aux cable – connected from the RCA, aux or daisy chain outputs on the speaker that the instrument or microphone is connected to, wired to the RCA, aux or daisy chain input of the secondary speaker. Alternatively a small mixing console can be used - connecting audio sources to this mixer and sending the mixed audio signal to the speakers with a wired connection.
  • Using Quantum DUO with our QuantumENGINE software
    Unfortunately, our JBL Quantum DUO speakers are not supported by our QuantumENGINE PC software.
    All configuration is done on the speakers itself, and there is no need or required software to change the RGB lights.
  • What are the sound modes on the JBL Bar Studio, Bar 2.1, Bar 3.1, and Bar 5.1?
    There are 5 sound modes: - Standard - Movie - Music - Voice - Sports Out the box, "Standard" sound mode is the default setting. The display on the soundbar's front panel will show which mode you are in (excluding the Bar Studio) Dotted LED lights on the side of the JBL Studio indicates when sound more your are in, the patterns are as follows: - Standard: One LED dot - Movie: Two LED dots - Music: Three LED dots - Voice: Four LED dots - Sports: Five LED dots
  • What does the Moment button do?
    It is a personalization feature that allows you to customize your favorite music track, auto-off timing, and music volume.
    Once set up, you can directly access it through the remote control or within the JBL ONE App.
  • What is Dolby Atmos and what does it do?
    Dolby Atmos is a 3D surround sound format.
    Using Dolby Atmos, the soundbar can reproduce multi-channel surround sound, including a virtual height channel. 
    Note: This feature only applies to Dolby Audio content.
    For more information, visit Dolby Atmos at https://www.dolby.com/technologies/dolby-atmos. 
< 1 2 3 4 5 6 7 >

찾는 제품이 없나요?

연락하기

연락하기

제품 전문가에게 지금 전화하십시오. 02-553-3494

월~금, 오전 9시 오후6시