JBL Wave 100TWS

JBL Wave 100TWS

진정한 무선 인이어 헤드폰

JBL Wave 100TWS 제품 사용 시작하기

JBL Wave 100TWS 제품 사용 시작하기

빠른 시작 안내

쉽게 따라할 수 있는 빠른 시작 가이드로 즉시 실행하기

Product Registration

제품 등록하기

이 제품을 소유하고 계신가요? 여기에서 등록하세요! 그리고 보증 또는 서비스를 간편하게 요청하세요

지금 등록

문서 및 다운로드

제품 사양

Weight (g)
46.3
Driver size (mm)
8
Driver sensitivity at 1kHz/1mW (dB)
105.5
Dynamic frequency response range (Hz)
20 Hz – 20 kHz
Impedance (ohms)
16
Number of drivers per ear
1
충전케이스 무게 (그램)
36.1
충전케이스 무게 (온스)
1.3
이어폰 무게(그램)
10.2
이어폰 무게(온스)
0.4
Bluetooth profiles
A2DP 1.3, AVRCP 1.6, HFP 1.7
Bluetooth frequency
2.4 GHz – 2.4835 GHz
Bluetooth transmitted modulation
GFSK, π/4-DQPSK, 8-DPSK
Bluetooth transmitter power
0 - 10dbm
Bluetooth version
5.0
Charging time (hours from empty)
2
최대 재생 시간(hours)
5
블루투스
Yes
Charging cable
Yes
Remote control on ear cups
Yes
Voice Assistant integration
Yes
Built-in Microphone
Yes
Charging case
Yes
Hands Free Call
Yes
Rechargable battery
Yes
True Wireless
Yes
Wireless
Yes

심플하고, 스마트한, 일상의 즐거움!

훌륭한 사운드에, 심플하면서, 무선이기까지? 심플: JBL Wave 100TWS. JBL Deep Bass 사운드가 지원되는 이 진정한 무선 헤드폰은 최대 20시간 재생되어 일상의 즐거움을 선사합니다. 최상의 편리함과 핸즈프리 통화로 완전한 무선의 자유를 느껴보세요. 이중 연결 덕분에 즉시 페어링할 수 있고 독립적으로 작동하여, 흐름이 끊기는 일 없이 이어버드에서 음악, 통화, 보이스 어시스턴트를 제어할 수 있습니다. 일상의 즐거움을 누리세요!

나만을 위한 콘서트 사운드. 8mm 드라이버가 선사하는 깊은 베이스 사운드를 즐겨보세요.
JBL Wave 100TWS는 이어버드 5시간, 케이스 사용 시 15시간 재생이 가능해 하루 종일 리듬을 유지할 수 있습니다.
독립적으로 작동 가능한 JBL Wave 100TWS는, 어느 쪽 이어버드가 먼저 연결되든 상관없이, 귀에 꽂는 즉시 페어링되므로, 배터리 전력을 절약할 수 있습니다.
통화 및 사운드를 비롯하여 기기의 보이스 어시스턴트에 대한 액세스가 이어버드에서 편리하게 관리됩니다.
JBL Wave 100TWS는 인체공학적으로 설계되어 몇 시간 동안 귀에 꽂고 음악을 즐기더라도 편안한 착용감을 선사합니다. 이어팁이 3가지 크기로 제공되므로 귀를 완벽히 밀폐하여 편안하게 착용하고 선명한 사운드를 즐길 수 있습니다.
어디에서든 편리하게 휴대할 수 있습니다. JBL Wave 100TWS는 케이스에 넣었을 때와 뺐을 때 모두 작고 가벼워, 주머니에 쏙 넣을 수 있습니다.

FAQ 및 사용 방법

3 카운트 결과
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all TWS earphones and cases.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

    If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • 대부분의 경우 컴퓨터/PC/노트북이 블루투스 기기(휴대용 스피커, 헤드폰, 액티브 스피커)에 연결되면서 문제가 발생하며, 이는 컴퓨터/PC/노트북의 블루투스 드라이버(소프트웨어)가 원인입니다.

    드라이버(소프트웨어)가 다음과 같은 블루투스 프로토콜을 지원해야, 컴퓨터/PC/노트북에서 음악/소리를 재생할 수 있습니다.

    • A2DP(고급 오디오 배포 프로필) 드라이버(사용자의 컴퓨터/PC/노트북에 음악 전송용).

    • AVRCP(오디오/동영상 원격 제어 프로필) 드라이버(사용자의 기기에 대한 음악 건너뛰기/앞으로/일시정지/재생 명령 전송용)

    반드시 사용자의 컴퓨터/PC/노트북용으로 제공되는 최신 드라이버 버전을 설치합니다.

    올바른 드라이버(소프트웨어)를 다운로드하려면, 사용자의 컴퓨터/PC/노트북 제조업체의 웹사이트를 확인합니다. 일반적으로 ‘지원/다운로드’ 섹션에서 맞는 드라이버를 찾을 수 있습니다. 혹은, 해당 업체의 서비스 지원 센터에 연락하기를 권장합니다.

    Microsoft/Windows 시스템에서 제공되는 표준 드라이버는 적합하지 않으며 오류 메시지가 표시되거나(PIN 코드를 입력해야 하는 등), 페어링이 작동하지 않습니다.

찾는 제품이 없나요?

연락하기

연락하기

제품 전문가에게 지금 전화하십시오. 02-553-3494

월~금, 오전 9시 오후6시