JBL Reflect Mini NC - White - Waterproof true wireless Noise Cancelling sport earbuds - Hero JBL Reflect Mini NC - White - Waterproof true wireless Noise Cancelling sport earbuds - Front JBL Reflect Mini NC - White - Waterproof true wireless Noise Cancelling sport earbuds - Detailshot 1
JBL Reflect Mini NC - White - Waterproof true wireless Noise Cancelling sport earbuds - Hero
  • JBL Reflect Mini NC - White - Waterproof true wireless Noise Cancelling sport earbuds - Swatch Image
  • JBL Reflect Mini NC - Black - Waterproof true wireless Noise Cancelling sport earbuds - Swatch Image
  • JBL Reflect Mini NC - Blue - Waterproof true wireless Noise Cancelling sport earbuds - Swatch Image
  • JBL Reflect Mini NC - Green - Waterproof true wireless Noise Cancelling sport earbuds - Swatch Image

JBL Reflect Mini NC

YBL Reflect Mini NC 인이어 스포츠 헤드폰은 요가, 달리기, 바레 등 어디에서든 애슬레저 라이프스타일에 완벽한 액세서리입니다. 능동 소음 제거를 통해 방해 요소 없이 피트니스 목표에 집중할 수 있으며, 스마트 환경인식 기술로 주변 환경을 인식하거나 친구와 채팅할 수 있습니다. 각각의 인이어는 즉시 독립적으로 연결되므로, 둘 중 하나로 통화를 할 수 있고, 왼쪽 및 오른쪽에 고유한 기능을 할당할 수 있습니다. 21시간의 재생 시간, 다양한 선택 가능 색상과 IPX7 방수 등급을 지원하는 최고의 진정한 무선 인이어 스포츠 헤드폰입니다.

제품 사양

General Specifications

Bluetooth version 5.1
Ear tip material Silicon
Driver size (mm) 6

Audio Specifications

Driver sensitivity at 1kHz/1mW (dB) 97
Dynamic frequency response range (Hz) 20 Hz – 20 kHz
Impedance (ohms) 16
Number of drivers per ear 1

Dimension Specifications

충전케이스 무게 (온스) 1.6
이어폰 무게(온스) 0.5
충전케이스 무게 (그램) 46
이어폰 무게(그램) 13.5

Control Connect Specifications

Bluetooth profiles A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth frequency 2.4 GHz – 2.4835 GHz
Bluetooth transmitted modulation GFSK, π/4DQPSK, 8DPSK
Bluetooth transmitter power 0 - 10dbm
자세한 사양은 문서를 참조하십시오.

문서 및 다운로드

비디오

박스 구성품

  • REFLECT Mini NC 1개
  • 3가지 크기의 이어팁
  • 3가지 크기의 이어핀 스태빌라이저
  • 충전 케이스 1개
  • C형 충전 케이블 1개
  • 품질보증서/경고 1부(W/!)
  • 1 x QSG/안전 관리 지침 1부(S / i)
JBL Reflect Mini NC - What's in the Box

FAQ 및 사용 방법

How to Perform a Hardware Reset
To perform a hardware reset of your earbuds, press and hold the reset button on the charging case* for more than 5 seconds. This resets the earbuds without restoring the settings to the factory defaults.
* Location
Live 300TWS/Live Pro+ TWS: Inside the charging case between the earbuds.
Live Free NC+/Reflect Mini NC TWS/Reflect Aero: On the back of the charging case, next to the USB-C port.
Club Pro+ TWS: On the bottom of the charging case, next to the USB-C port.
Trouble accessing the Google Assistant or Amazon Alexa on your Headphone
First, ensure that you have the Google Assistant or Amazon Alexa apps installed on your device, depending on the voice assistant you want to use. Go to your app store to download the intended voice assistant app, then add your headphones as a device in the app if necessary. Finally, enable the intended voice assistant in the settings of the My JBL Headphones app and assign which earbud you want to use to control it. The voice assistant app must be open for it to work correctly. It can be opened from within the My JBL Headphones app by tapping the name of the required voice assistant after you have selected it for use and assigned a gesture to one of your earbuds to control it.
How to Turn off your TWS Headphones
1. Put the earbuds back into the charging case and close the lid. 2. Press and hold the buttons on both the left and right earbuds for more than 2 seconds. Alternatively, only press and hold one of the buttons to just turn off the left or right earbud as required. 3. Use the Auto-off function via the JBL Headphone app (Only applicable for headphones supported in our JBL Headphone app).
How to connect your headphones to the Amazon Alexa for Android and iOS devices
Visit the App Store and download the ‘Amazon Alexa’ App.

  Set up Amazon Alexa #1.png
  1. Click the Plus(+) button on the top right of the screen.
  2. Then select ‘Add Device‘.
  3. Select headphones from the list and then choose your Headphones from the list of available devices.
  4. Follow the rest of the instructions in the Alexa App to complete the setup.
Standby Mode Information

If the earbuds go into standby mode and turn off, you can still use them without putting them back into the charging case. 
You can reactivate the headphones by pressing or touching the outside earbud itself.
Please note: They will be automatically powered off after 30 minutes of being in standby mode if they disconnect from Bluetooth. To reconnect, you will need to put the earbuds back in the charging case and take them off again. 

It is possible to change the standby mode time with your headphones. To do this, go into the My JBL Headphones app and choose the S
tandby Time via Auto-off function. You can adjust the time to 15min, 1hr, etc., or you can choose “Never” if you want to keep the earbuds turn on at all times. Once you set the Auto-off, the earbuds will work according to the setting whether they connect to Bluetooth or disconnect.
 

How to connect your headphones to the Google Assistant for Android devices
If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.

After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

Step 1

  Set up Google Assistant #5.png
Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
Once set up is complete, you will see the below screen:

Step 2

Set up Google Assistant #2.png

PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Set up Google Assistant #3.png
Set up Google Assistant #4.png
How to use Google Assistant with your headphones
After setting up Google Assistant on your headphones through the My JBL Headphones app, use Google Assistant by pressing & holding the touch panel for 2 seconds on the earbud that you enabled the voice assistant feature on.
Trigger Google - #1 FAQ.png
Press and hold the Action button to begin. Requires pairing with eligible phone and internet connection. For examples of questions and things you can do, visit: 
https://assistant.google.com/platforms/phones/#headphones

Get your notifications
Double-tap the Action button.

Stop your Google Assistant
Touch the Action button.

Reply to the message (where available)
After receiving a message notification, touch and hold the Action button to respond. When you’re done, release the button.

For more information on what your Google Assistant can do, visit: https://assistant.google.com/platforms/headphones

 
How to use Amazon Alexa with your headphones
How to Factory Reset True Wireless Stereo Earbuds
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). 
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
How to connect your headphones to the Google Assistant for iOS devices
Visit your App store to download the ‘Google Assistant’ App.

After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

Step 1

  Set up Google Assistant #1.png
Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
Once set up is complete, you will see the below screen:

Step 2

Set up Google Assistant #2.png

PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
  Set up Google Assistant #3.png
Set up Google Assistant #4.png
How to switch between voice assistants using the My JBL Headphone app
The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.

Switching between voice assistant #1.png

You can change the default assistant in the ‘My JBL Headphones’ app:
  1. Open the My JBL Headphones app on your device.
  2. Select the headphones you are connected too.
  3. Go to Settings by clicking the symbol in the top right corner.
  4. Select Voice Assistant.
  5. Now you can select your preferred voice assistant.
Switching between voice assistant #2.png

Your headphones may restart after switching Voice Assistant.

Register your product

Do you own this product?
Register it here!
And claim your warranty or service easily

Register now

찾는 제품이 없나요?

연락하기

연락하기

제품 전문가에게 지금 전화하십시오. 02-553-3494

월~금, 오전 9시 오후6시