JBL Live Pro 2 TWS - Silver - True wireless Noise Cancelling earbuds - Hero JBL Live Pro 2 TWS - Silver - True wireless Noise Cancelling earbuds - Front JBL Live Pro 2 TWS - Silver - True wireless Noise Cancelling earbuds - Back
JBL Live Pro 2 TWS - Silver - True wireless Noise Cancelling earbuds - Hero
  • JBL Live Pro 2 TWS - Silver - True wireless Noise Cancelling earbuds - Swatch Image
  • JBL Live Pro 2 TWS - Blue - True wireless Noise Cancelling earbuds - Swatch Image
  • JBL Live Pro 2 TWS - Black - True wireless Noise Cancelling earbuds - Swatch Image
  • JBL Live Pro 2 TWS - Rose - True wireless Noise Cancelling earbuds - Swatch Image

JBL Live Pro 2 TWS

하루 종일 스타일리시한 동반자와 신나게 일하고 놀 수 있습니다. JBL Live Pro 2 이어버드는 배터리 충전이 필요할 때를 위해 최대 40시간의 놀라운 JBL Signature Sound(이어버드로 10시간 + 케이스에서 30시간), 고속 충전, Qi 호환 무선 충전 기능을 제공합니다. 진정한 적응형 소음 제거 기능으로 방해 요소를 없애 완전히 몰입형 오디오를 제공하는 동시에, 스마트 환경인식으로 주변 환경을 인지할 수 있습니다. 스틱 클로즈드(stick closed) 디자인과 타원형 튜브는 보다 선명함을 선호하는 분들을 위해 개선된 소음 제거 기능과 향상된 오디오 품질을 구현합니다. 대화가 필요한가요? 6개의 빔포밍 마이크를 통해 선명하고 완벽한 통화를 하거나 선호하는 음성 도우미에 액세스하여 어디로 일상의 모험을 떠나든지 원활한 핸즈프리 제어 및 연결이 가능합니다.

제품 사양

General Specifications

Driver size (mm) 11

Audio Specifications

Driver sensitivity at 1kHz/1mW (dB) 105
Dynamic frequency response range (Hz) 20 Hz - 20 kHz
Impedance (ohms) 16

Dimension Specifications

드라이버 크기 11mm/0.43인치 다이내믹 드라이버
이어버드 피스당 4.8g(합계 9.6g)/피스당 0.01파운드(합계 0.02파운드)
충전 케이스 48.4g/0.106파운드

Control Connect Specifications

Bluetooth profiles A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth frequency 2.4 GHz - 2.4835 GHz
Bluetooth transmitted modulation GFSK, π/4 QPSK, 8DPSK
Bluetooth transmitter power < 12 dBm EIRP
Bluetooth version 5.2
자세한 사양은 문서를 참조하십시오.

문서 및 다운로드

비디오

박스 구성품

  • JBL Live Pro 2 이어버드 1쌍
  • 3가지 크기의 이어팁 각 1쌍
  • C형 USB 충전 케이블 1개
  • 충전 케이스 1개
  • 품질보증서/경고 1부(W / !)
  • 제품 QSG/안전 관리 지침 1부(S/i)
JBL Live Pro 2 TWS - What's in the Box

FAQ 및 사용 방법

Voice Assistant Headphone Connection
Trouble accessing the Google Assistant or Amazon Alexa on your Headphone
First, ensure that you have the Google Assistant or Amazon Alexa apps installed on your device, depending on the voice assistant you want to use. Go to your app store to download the intended voice assistant app, then add your headphones as a device in the app if necessary. Finally, enable the intended voice assistant in the settings of the My JBL Headphones app and assign which earbud you want to use to control it. The voice assistant app must be open for it to work correctly. It can be opened from within the My JBL Headphones app by tapping the name of the required voice assistant after you have selected it for use and assigned a gesture to one of your earbuds to control it.
How to use Google Assistant with your headphones
After setting up Google Assistant on your headphones through the My JBL Headphones app, use Google Assistant by pressing & holding the touch panel for 2 seconds on the earbud that you enabled the voice assistant feature on.
Trigger Google - #1 FAQ.png
Press and hold the Action button to begin. Requires pairing with eligible phone and internet connection. For examples of questions and things you can do, visit: 
https://assistant.google.com/platforms/phones/#headphones

Get your notifications
Double-tap the Action button.

Stop your Google Assistant
Touch the Action button.

Reply to the message (where available)
After receiving a message notification, touch and hold the Action button to respond. When you’re done, release the button.

For more information on what your Google Assistant can do, visit: https://assistant.google.com/platforms/headphones

 
How to use Amazon Alexa with your headphones
Can my headphones be connected to two devices simultaneously?
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices. 
How to Factory Reset True Wireless Stereo Earbuds
Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). 
This restores the earbuds to the factory defaults.
TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.
It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
How to switch between voice assistants using the My JBL Headphone app
The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.

Switching between voice assistant #1.png

You can change the default assistant in the ‘My JBL Headphones’ app:
  1. Open the My JBL Headphones app on your device.
  2. Select the headphones you are connected too.
  3. Go to Settings by clicking the symbol in the top right corner.
  4. Select Voice Assistant.
  5. Now you can select your preferred voice assistant.
Switching between voice assistant #2.png

Your headphones may restart after switching Voice Assistant.

Register your product

Do you own this product?
Register it here!
And claim your warranty or service easily

Register now

찾는 제품이 없나요?

연락하기

연락하기

제품 전문가에게 지금 전화하십시오. 02-553-3494

월~금, 오전 9시 오후6시