JBL Live 460NC - White - Wireless on-ear NC headphones - Hero JBL Live 460NC - White - Wireless on-ear NC headphones - Front JBL Live 460NC - White - Wireless on-ear NC headphones - Detailshot 1
JBL Live 460NC - White - Wireless on-ear NC headphones - Hero
  • JBL Live 460NC - White - Wireless on-ear NC headphones - Swatch Image
  • JBL Live 460NC - Black - Wireless on-ear NC headphones - Swatch Image
  • JBL Live 460NC - Rose - Wireless on-ear NC headphones - Swatch Image
  • JBL Live 460NC - Blue - Wireless on-ear NC headphones - Swatch Image

JBL Live 460NC

이것이 존에 있다면, 뛰어난 음질을 들을 수 있습니다. 그러니 JBL Live 460NC 헤드폰을 끼고 두 가지를 모두를 경험해보세요. 대형 40mm 드라이버를 채용한 JBL Live 460NC 헤드폰은 저음이 보강된 JBL 시그니처 사운드로 모든 연주자의 모든 트랙에서 폭발적인 음을 선사합니다. 사운드 집중이 필요한 경우 적응형 노이즈 캔슬링을 활성화하고 주위와 계속 연결을 유지하려면 스마트 앰비언트를 활성화하세요. 하루를 헤쳐나가는 데에 도움이 필요하신가요? 음성을 사용하거나 이어컵을 탭하여 선호하는 음성 어시스턴트의 도움을 받으세요. Hey Google을 설정한 경우 음성만으로 JBL Live 460NC 기능을 활성화하세요. 마술이 펼쳐집니다! 베개처럼 부드러운 패드의 헤드밴드로 인해 가볍고 편안하며, 적응형 노이즈 캔슬링을 끈 상태에서 최대 50시간 음악 스트리밍을 즐길 수 있고, 완벽한 스테레오 통화도 가능하고 편리한 착탈식 케이블을 이용하여 배터리가 방전되더라도 계속해서 음악을 재생할 수 있습니다. 사용하지 않을 때에는 Live 460NC가 자동으로 일시 중지했다가 다시 집어 올리면 다시 재생을 시작합니다. JBL Live 460NC 헤드폰으로 주파수를 맞추고 마음껏 즐겨보세요. (*) Android에서만 지원됩니다. (**) 이 장치를 사용할 때 Android 6.0 이상이어야 Alexa 기능을 완전히 이용할 수 있습니다.

제품 사양

General Specifications

Driver size (mm) 40

Audio Specifications

Driver sensitivity at 1kHz/1mW (dB) 96
Dynamic frequency response range (Hz) 20Hz – 20kHz
Impedance (ohms) 32

Dimension Specifications

Weight (g) 210
Weight (oz) 7.4
헤드폰 케이블 길이(m) 0.2
헤드폰 케이블 길이(운각) 0.7
높이 (인치) 2.6
너비(인치) 2.6
I내부 너비 (인치) 1.4
내부 높이 (인치) 1.4
깊이 (인치) 0.6
높이 (센티미터) 6.7
너비(센티미터) 6.7
I내부 너비(센티미터) 3.5
내부 높이(센티미터) 3.5
깊이(센티미터) 1.5

Control Connect Specifications

Bluetooth profiles HFP V1.7, A2DP V1.3, AVRCP V1.6
Bluetooth frequency 2.402GHz – 2.48GHz
Bluetooth transmitted modulation GFSK, π/4 DQPSK, 8DPSK
Bluetooth transmitter power <13dBm
Bluetooth version 5.0
자세한 사양은 문서를 참조하십시오.

문서 및 다운로드

비디오

박스 구성품

  • Live 460NC
  • 오디오 케이블
  • C형 충전 케이블
  • 품질보증서/경고 1부
  • 안전 관리 지침/QSG 1부
JBL Live 460NC - What's in the Box

FAQ 및 사용 방법

Can my headphones be connected to two devices simultaneously?
Yes, the headphones have Multipoint Connection, which allows you to switch seamlessly between the connected devices. 
헤드폰 및 제삼자 통신 앱(Skype, Zoom, WhatsApp 등)

헤드폰과 통신하는 앱을 입수하는 데 문제를 겪고 있다면, (이미 헤드폰을 기기와 페어링한 상태로 가정) 통신 앱 오디오 설정으로 이동합니다. 거기서 해결책을 찾을 수 있는 가능성이 높습니다. 사용하고 있는 앱에서 헤드폰을 ‘통신 기기’로 설정해야 할 수 있습니다. 

헤드폰과 통신하는 앱을 입수하는 데 문제를 겪고 있다면, (이미 헤드폰을 기기와 페어링한 상태로 가정) 통신 앱 오디오 설정으로 이동합니다. 거기서 해결책을 찾을 수 있는 가능성이 높습니다. 사용하고 있는 앱에서 헤드폰을 ‘통신 기기’로 설정해야 할 수 있습니다. 

My JBL Headphones App Support
This headphone is supported by the My JBL Headphones App.
How to use Google Assistant with your headphones
After setting up Google Assistant on your headphones through the My JBL Headphones app, use Google Assistant by pressing & holding the touch panel for 2 seconds on the earbud that you enabled the voice assistant feature on.
Trigger Google - #1 FAQ.png
Press and hold the Action button to begin. Requires pairing with eligible phone and internet connection. For examples of questions and things you can do, visit: 
https://assistant.google.com/platforms/phones/#headphones

Get your notifications
Double-tap the Action button.

Stop your Google Assistant
Touch the Action button.

Reply to the message (where available)
After receiving a message notification, touch and hold the Action button to respond. When you’re done, release the button.

For more information on what your Google Assistant can do, visit: https://assistant.google.com/platforms/headphones

 
How to connect your headphones to the Google Assistant for iOS devices
Visit your App store to download the ‘Google Assistant’ App.

After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

Step 1

  Set up Google Assistant #1.png
Follow the steps to connect and pair “JBL XXXX-LE” with the Google Assistant App, the name will depend on your model.
Once set up is complete, you will see the below screen:

Step 2

Set up Google Assistant #2.png

PLEASE NOTE: To verbally interact with your Google Assistant via the headphone, you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
  Set up Google Assistant #3.png
Set up Google Assistant #4.png
Headphones & Third Party Communication Apps (Skype, Zoom, WhatsApp, etc)

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

컴퓨터나 PC와의 페어링 문제
대부분의 경우 컴퓨터/PC/노트북이 블루투스 기기(휴대용 스피커, 헤드폰, 액티브 스피커)에 연결되면서 문제가 발생하며, 이는 컴퓨터/PC/노트북의 블루투스 드라이버(소프트웨어)가 원인입니다.

드라이버(소프트웨어)가 다음과 같은 블루투스 프로토콜을 지원해야, 컴퓨터/PC/노트북에서 음악/소리를 재생할 수 있습니다.

• A2DP(고급 오디오 배포 프로필) 드라이버(사용자의 컴퓨터/PC/노트북에 음악 전송용).

• AVRCP(오디오/동영상 원격 제어 프로필) 드라이버(사용자의 기기에 대한 음악 건너뛰기/앞으로/일시정지/재생 명령 전송용)

반드시 사용자의 컴퓨터/PC/노트북용으로 제공되는 최신 드라이버 버전을 설치합니다.

올바른 드라이버(소프트웨어)를 다운로드하려면, 사용자의 컴퓨터/PC/노트북 제조업체의 웹사이트를 확인합니다. 일반적으로 ‘지원/다운로드’ 섹션에서 맞는 드라이버를 찾을 수 있습니다. 혹은, 해당 업체의 서비스 지원 센터에 연락하기를 권장합니다.

Microsoft/Windows 시스템에서 제공되는 표준 드라이버는 적합하지 않으며 오류 메시지가 표시되거나(PIN 코드를 입력해야 하는 등), 페어링이 작동하지 않습니다.
How to switch between voice assistants using the My JBL Headphone app
The voice assistant you select in the initial set-up (pictured below) will be used as the default assistant on your headphones.

Switching between voice assistant #1.png

You can change the default assistant in the ‘My JBL Headphones’ app:
  1. Open the My JBL Headphones app on your device.
  2. Select the headphones you are connected too.
  3. Go to Settings by clicking the symbol in the top right corner.
  4. Select Voice Assistant.
  5. Now you can select your preferred voice assistant.
Switching between voice assistant #2.png

Your headphones may restart after switching Voice Assistant.
How to connect your headphones to the Amazon Alexa for Android and iOS devices
Visit the App Store and download the ‘Amazon Alexa’ App.

  Set up Amazon Alexa #1.png
  1. Click the Plus(+) button on the top right of the screen.
  2. Then select ‘Add Device‘.
  3. Select headphones from the list and then choose your Headphones from the list of available devices.
  4. Follow the rest of the instructions in the Alexa App to complete the setup.
Pairing issues with a Smartphone or Tablet
1. First, try to restart the Bluetooth connection on your source device (Smartphone/tablet/PC) by switching Bluetooth off and on again with a short pause in between.

2. "Forget" (remove) the previously paired connection (on your smartphone/tablet/PC) in your Bluetooth settings if you had once paired with your product.

3. Try to restart the source device (Smartphone/tablet/PC) by powering it off and on again and after restarting, try to establish a Bluetooth connection to your product.

4. If the above does not work, then try to restart your product (Portable speaker, Headphone) by turning it off and on again.

5. Press and hold down the Bluetooth button on your device (Portable speaker, Headphones) to initiate pairing mode again.

6. Go into the Bluetooth settings on your Smartphone/tablet or PC to start the pairing process.

You should now have a successful pairing with your device. If you are still experiencing issues, please contact us again.
Pairing issues with a Computer or PC
In most cases when a Computer/PC/Laptop has issues connecting to a Bluetooth device (Portable speaker, Headphones, Active speakers), it's caused by your Computer/PC/Laptop's Bluetooth driver (software).

The driver (software) should support the following Bluetooth protocols, to be able to play music/sound from your Computer/PC/Laptop:

• A2DP (Advanced Audio Distribution Profile) driver for your Computer/PC/Headphones to transfer music.

• AVRCP (Audio/Video Remote Control Profile) driver to send skip/forward/pause/play music to your device

Always get the latest driver version available for your Computer/PC/Laptop.

To download the correct driver (software), visit the manufacturer's website of your Computer/PC/Laptop. They usually have a "Support/Download" section where you can find the correct driver. Otherwise, we advise you to contact their support.

The standard drivers provided by Microsoft/Windows system are not correct and will result in error messages (such as having to enter a PIN code), or pairing will not work.
Trouble accessing the Google Assistant or Amazon Alexa on your Headphone
First, ensure that you have the Google Assistant or Amazon Alexa apps installed on your device, depending on the voice assistant you want to use. Go to your app store to download the intended voice assistant app, then add your headphones as a device in the app if necessary. Finally, enable the intended voice assistant in the settings of the My JBL Headphones app and assign which earbud you want to use to control it. The voice assistant app must be open for it to work correctly. It can be opened from within the My JBL Headphones app by tapping the name of the required voice assistant after you have selected it for use and assigned a gesture to one of your earbuds to control it.
How to use Amazon Alexa with your headphones
How to avoid Bluetooth Interference or Interruptions
• Always have clear line of sight between your Bluetooth device (speaker, headphones etc.) and source device (Smartphone/tablet/PC etc). Be aware of obstacles in front of your devices.

• Try to shutdown other products that have Bluetooth, but are not being used. They are often the reason for interference even though they are not being used.

• Do not stand too close to your Wi-Fi router since a Wi-Fi signal is stronger and in many cases will "overlap" the connection.

• Be aware of walls around you. Concrete and brick walls will often interrupt the signal, as it cannot pass through such thick walls.

• Bluetooth signals cannot travel through water, which includes the human body. Make sure with wireless headphones to keep your source device and the receiver on the same side of your body.

• Open spaces such as parks can cause issues for your devices, as open air is "bad" for any Bluetooth signal if it cannot reflect from objects around you.
How to connect your headphones to the Google Assistant for Android devices
If not pre-installed on your Android device, visit your App store to download the ‘Google Assistant’ App.

After you have paired your JBL headphones to your device via Bluetooth, you should receive a pop-up notification (pictured below). Please tap the notification on your device to start the Google Assistant setup. You will now be directed to the Google Assistant App.

Step 1

  Set up Google Assistant #5.png
Follow the steps to connect and pair “JBL XXXX-LE” (depends on your model) with your devices.
Once set up is complete, you will see the below screen:

Step 2

Set up Google Assistant #2.png

PLEASE NOTE: In order to verbally interact with your Google Assistant via the headphone you must turn on the ‘Spoken Notifications’ in the Google Assistant App. This can be found under: Assistant Devices > Notifications. Alternatively, your JBL headphones can be added to the Google Assistant App manually by adding them as a Bluetooth device if this was not done when first paired. Google Assistant must be selected as your chosen voice assistant in the settings of the My JBL Headphones App also.
Set up Google Assistant #3.png
Set up Google Assistant #4.png

Register your product

Do you own this product?
Register it here!
And claim your warranty or service easily

Register now

찾는 제품이 없나요?

연락하기

연락하기

제품 전문가에게 지금 전화하십시오. 02-553-3494

월~금, 오전 9시 오후6시