JBL Endurance Peak II

JBL Endurance Peak II

진정한 무선 방수 인이어 스포츠 헤드폰

JBL Endurance Peak II 제품 사용 시작하기

JBL Endurance Peak II 제품 사용 시작하기

빠른 시작 안내

쉽게 따라할 수 있는 빠른 시작 가이드로 즉시 실행하기

Product Registration

제품 등록하기

이 제품을 소유하고 계신가요? 여기에서 등록하세요! 그리고 보증 또는 서비스를 간편하게 요청하세요

지금 등록

문서 및 다운로드

제품 사양

Driver size (mm)
10
Driver sensitivity at 1kHz/1mW (dB)
95
Dynamic frequency response range (Hz)
20 Hz - 20 kHz
Impedance (ohms)
16
Number of drivers per ear
1
충전케이스 무게 (그램)
77
충전케이스 무게 (온스)
2.7
이어폰 무게(그램)
26
이어폰 무게(온스)
0.9
Bluetooth profiles
A2DP 1.3 AVRCP 1.5 HFP 1.7
Bluetooth frequency
2.4 GHz – 2.4835 GHz
Bluetooth transmitted modulation
GFSK, π/4DQPSK, 8DPSK
Bluetooth transmitter power
0 - 13dbm
Bluetooth version
5.0
Charging time (hours from empty)
2
최대 재생 시간(hours)
6
블루투스
Yes
터치 컨트롤
Yes
Voice Assistant integration
Yes
Built-in Microphone
Yes
Charging case
Yes
Hands Free Call
Yes
JBL Pure Bass Sound
Yes
PowerHook™
Yes
Rechargable battery
Yes
Sweat Proof
Yes
True Wireless
Yes
Waterproof
Yes
Wireless
Yes
IPX 등급
IP67

귀가 아프지 않으며 떨어지지 않습니다

열정적인 운동에는 멋진 도구가 필요합니다. JBL Endurance Peak II 진정한 무선 헤드폰은 JBL Pure Bass 사운드를 제공하여 운동에 활기를 주는 동시에 편안함과 연결성을 제공해 계속 운동 강도를 높일 수 있게 해줍니다. Powerhook™ 덕분에 착용하는 순간부터 시작해서 30시간 동안의 결합 배터리 수명으로 운동에 한 층 더 동기를 부여합니다. 직관적인 터치 컨트롤을 통해 핸즈프리 통화가 가능하고, 음성 지원 기능에 액세스할 수 있으며 이중 연결을 통해 이어버드가 독립적으로 작동하도록 제어할 수 있습니다. 인체공학적 착용감과 땀에 강한 생활방수/방수 디자인으로 어디서든 더 오래 격렬하게 운동할 수 있습니다.

충분한 베이스를 제공하여 전신에 활력을 불어 넣고 가장 필요할 때 힘을 받을 수 있습니다.
최대한 긴 배터리 사용 시간으로 더 열심히 운동하고 더 많은 영감을 얻을 수 있습니다.
내가 Endurance PEAK II에 맞추는게 아니라 그 반대입니다. 이어 후크 위의 구부릴 수 있는 와이어로 헤드폰을 크기 및 편안한 착용감에 맞게 조절할 수 있습니다. 또한, 음악을 들으며 작업에 집중하고, 원할 때 시작하고 멈추며, 쉽게 신나는 음악에 빠지기 원하는 마음을 읽을 정도로 직관적인 제어가 가능합니다.
어떤 헤드폰을 케이스에서 먼저 꺼내는지는 중요하지 않습니다. 전화를 걸거나, 볼륨을 조정하거나, 어느 한쪽 귀에 음성 보조기를 사용할 수 있어 유연하고 운동에 방해가 되지 않습니다.
운동 흐름을 중단하지 않고 사람들과 연락을 유지하고 재생을 제어합니다.
원하는 만큼 젖으십시오. 비가 오든 순수하고 정직한 땀이든 땀/방수 기능이 있어 Endurance Peak II는 걱정할 필요가 없습니다. 멀리 갈 준비가 되어있는 IP67 등급은 이 헤드폰을 어떤 요소에도 매우 견고하게 만듭니다.

FAQ 및 사용 방법

4 카운트 결과
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all TWS earphones and cases.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

    If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • Place both ear pods in the charging box, while the charging box is plugged into a power source. Press and hold the button on the Right pod for about 5 seconds. The LED on the pod will turn off and then turn back on again. This restores to factory defaults. (Please note that charging must take place for reset to work.) It also may be necessary to remove or forget the earbuds from the list of paired Bluetooth devices in order to pair again.
  • 대부분의 경우 컴퓨터/PC/노트북이 블루투스 기기(휴대용 스피커, 헤드폰, 액티브 스피커)에 연결되면서 문제가 발생하며, 이는 컴퓨터/PC/노트북의 블루투스 드라이버(소프트웨어)가 원인입니다.

    드라이버(소프트웨어)가 다음과 같은 블루투스 프로토콜을 지원해야, 컴퓨터/PC/노트북에서 음악/소리를 재생할 수 있습니다.

    • A2DP(고급 오디오 배포 프로필) 드라이버(사용자의 컴퓨터/PC/노트북에 음악 전송용).

    • AVRCP(오디오/동영상 원격 제어 프로필) 드라이버(사용자의 기기에 대한 음악 건너뛰기/앞으로/일시정지/재생 명령 전송용)

    반드시 사용자의 컴퓨터/PC/노트북용으로 제공되는 최신 드라이버 버전을 설치합니다.

    올바른 드라이버(소프트웨어)를 다운로드하려면, 사용자의 컴퓨터/PC/노트북 제조업체의 웹사이트를 확인합니다. 일반적으로 ‘지원/다운로드’ 섹션에서 맞는 드라이버를 찾을 수 있습니다. 혹은, 해당 업체의 서비스 지원 센터에 연락하기를 권장합니다.

    Microsoft/Windows 시스템에서 제공되는 표준 드라이버는 적합하지 않으며 오류 메시지가 표시되거나(PIN 코드를 입력해야 하는 등), 페어링이 작동하지 않습니다.

찾는 제품이 없나요?

연락하기

연락하기

제품 전문가에게 지금 전화하십시오. 02-553-3494

월~금, 오전 9시 오후6시