JBL Wave 300TWS

JBL Wave 300TWS

트루 와이어리스 이어버드

JBL Wave 300TWS 제품 사용 시작하기

JBL Wave 300TWS 제품 사용 시작하기

빠른 시작 안내

쉽게 따라할 수 있는 빠른 시작 가이드로 즉시 실행하기

Product Registration

제품 등록하기

이 제품을 소유하고 계신가요? 여기에서 등록하세요! 그리고 보증 또는 서비스를 간편하게 요청하세요

지금 등록

문서 및 다운로드

제품 사양

Driver size (mm)
12
Driver sensitivity at 1kHz/1mW (dB)
105
Dynamic frequency response range (Hz)
20 Hz – 20 kHz
Impedance (ohms)
32
Weight (g)
7.7
Weight (oz)
.27
Bluetooth version
5.2
Bluetooth profiles
A2DP V1.3 AVRCP V1.6 HFP V1.7
Bluetooth frequency
2.4 GHz - 2.4835 GHz
Bluetooth transmitted modulation
GFSK, π/4–DQPSK, 8–DPSK
Bluetooth transmitter power
<12 dBm
Charging time (hours from empty)
2
최대 재생 시간(hours)
6
Charging cable
Yes
Voice Assistant integration
Yes
Built-in Microphone
Yes
Hands Free Call
Yes
Touch Control
Yes
True Wireless
Yes
Wireless
Yes
Charging case
Yes
Rechargable battery
Yes
블루투스
Yes

트루 와이어리스 이어버드

최고의 순간을 즐겨보세요. JBL Wave 300TWS 이어버드는 걸리적거리는 선 없이도 주변 환경과의 연결을 유지하면서 음악을 즐길 수 있게 해줍니다. JBL Deep Bass로 26시간 동안 강력하고 풍성한 사운드를 즐겨보세요. 스테레오 통화를 통해 이동 중에도 성가신 배경 소음 없이 연락을 주고받을 수 있습니다. 편리한 터치 컨트롤 덕분에 이어버드 한쪽 또는 양쪽 모두에서 핸즈프리로 오디오를 관리하고 통화를 처리할 수 있습니다. 인체공학적으로 설계된 “스틱 디자인”은 귀에 꼭 맞고 눈에 잘 띄지 않으며 하루 종일 편안하게 연결되어 있어 음악을 즐기거나 대화를 나눌 수 있습니다.

튼튼한 12mm 드라이버가 전달하는 JBL Deep Bass 사운드로 단순히 음악을 듣는 것에서 벗어나 음악을 느낄 수 있습니다.
26시간의 통합 재생 시간으로(이어버드 사용 시 6시간) 한순간도 놓치지 말고 음악을 즐기세요. 또는 빠른 전원 공급이 필요한 경우 10분 내에 1시간 및 완충 시 1시간의 배터리 시간을 급속 충전할 수 있습니다.
싱글 마이크 Wave 300TWS 이어버드가 배경 소음을 제거해주어 이동 중에도 스테레오 품질의 통화를 즐길 수 있습니다. 이어버드에서 직접 핸즈프리로 간편하게 사운드와 통화를 관리하세요!
전화를 걸거나 음악을 즐기거나 보이스 어시스턴트와 대화하는 동안 언제든지 왼쪽, 오른쪽 또는 양쪽 이어버드에서 모노 및 스테레오 모드를 쉽게 전환할 수 있습니다.
JBL Wave 300 TWS 이어버드는 IPX2 인증된 편리한 방수 설계로, 비나 눈이 오더라도 언제든지 음악을 즐길 수 있습니다.
손끝으로 편리하게. 편리한 터치 제어로 JBL Wave 300TWS 의 모든 오디오 기능을 활성화하고 이어버드에서 직접 장치의 보이스 어시스턴트에 액세스하세요.

FAQ 및 사용 방법

3 카운트 결과
  • It is not uncommon to have charging problems with True Wireless headphones. You may encounter that charging stops, does not start at all or that one of the ear buds suddenly switches on and begins the pairing process. This is almost always caused by dirt on the metal charging contacts. These contacts are vulnerable because they can easily be contaminated by sweat, skin grease, or ear wax. They are usually gold plated, but gold plating does not prevent surface dirt.

    If you have charging problems, the first step is to always clean all contact points, on each earbud and on the charging case.
    You will need: cotton cloth or makeup swab, cotton swabs and rubbing alcohol. Also a pencil with eraser for further cleaning.
    needed-tools.png
    Use a cotton swab with some rubbing alcohol to clean the charging terminals of the headphones. Rotate the swab and scrub lightly on each contact surface, then use a cotton cloth to remove any dust and cotton residue left on the headphones. It is important to perform this process periodically to keep your headphones clean, thus avoiding affecting the charging speed/quality.
    cleaning-earbud-contact-points.png
    Wipe the contact pins in the charging case with a clean cotton swab. The swab can be slightly moistened with rubbing alcohol, but it is important that the interior is completely dry before closing the box. Use the cotton cloth and wait for it to dry.
    cleaning-charging-case.png
    Repeat until the contact points are visibly clean, and charging should work as designed.

    Try cleaning the contacts with the tip of a pencil and the eraser at the end of the pencil, the graphite and rubber can help to re-establish charging also.
    This procedure can be performed on all TWS earphones and cases.
  • If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

    If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using. 

  • 대부분의 경우 컴퓨터/PC/노트북이 블루투스 기기(휴대용 스피커, 헤드폰, 액티브 스피커)에 연결되면서 문제가 발생하며, 이는 컴퓨터/PC/노트북의 블루투스 드라이버(소프트웨어)가 원인입니다.

    드라이버(소프트웨어)가 다음과 같은 블루투스 프로토콜을 지원해야, 컴퓨터/PC/노트북에서 음악/소리를 재생할 수 있습니다.

    • A2DP(고급 오디오 배포 프로필) 드라이버(사용자의 컴퓨터/PC/노트북에 음악 전송용).

    • AVRCP(오디오/동영상 원격 제어 프로필) 드라이버(사용자의 기기에 대한 음악 건너뛰기/앞으로/일시정지/재생 명령 전송용)

    반드시 사용자의 컴퓨터/PC/노트북용으로 제공되는 최신 드라이버 버전을 설치합니다.

    올바른 드라이버(소프트웨어)를 다운로드하려면, 사용자의 컴퓨터/PC/노트북 제조업체의 웹사이트를 확인합니다. 일반적으로 ‘지원/다운로드’ 섹션에서 맞는 드라이버를 찾을 수 있습니다. 혹은, 해당 업체의 서비스 지원 센터에 연락하기를 권장합니다.

    Microsoft/Windows 시스템에서 제공되는 표준 드라이버는 적합하지 않으며 오류 메시지가 표시되거나(PIN 코드를 입력해야 하는 등), 페어링이 작동하지 않습니다.

찾는 제품이 없나요?

연락하기

연락하기

제품 전문가에게 지금 전화하십시오. 02-553-3494

월~금, 오전 9시 오후6시