How To

Support Overview / How To

How To

448 results
  • How do I program preset FM stations in my JBL Horizon?
    The owner's manual can be a bit difficult to understand. Here is what to do to program a preset station that has not already been saved in any preset: 1 Turn on the radio by clicking the FM button. 2 Find the station you want to save by doing what is shown under pt. 8 B or C, either clicking or pressing/holding for more than 2 seconds the left/right arrow buttons. 3 Press and hold the FM button for more than 2 seconds. Now the preset number appears blinking. 4 Click on the left/right arrow buttons to skip through the preset positions. 5 When you have located the desired memory preset position, such as Preset 4, confirm by clicking the FM button. Now the desired FM station is saved in memory preset 4. If you have already saved an FM station in a preset memory position, and want to have a new station placed there instead, here is what to do: 1 Turn on the radio by clicking the FM button. 2 Jump to the preset station you want to change with the round central button. Each click advances to the next preset. 3 When you are on the preset you want to change, e.g. preset 4, press and hold the FM button for more than 2 seconds. 4 The FM symbol and the frequency will now blink. 5 Before they stop blinking, click, or press and hold one of the arrow buttons to go through the FM frequencies step by step, or perform station search. 6 When you have found the new station you want to save in preset 4, click the round central button. 7 Now the new station is saved in preset 4.
  • How do I reject a call?
    Press and hold the multi-function button shown in “quick start guide” section 5 to ignore incoming call.
  • How do I rename my device?
    (1) Select the JBL soundbar you want to rename
    (2) Navigate to the Support tile and select "Rename My Product."
    (3) Press the current name and type in the new name
    (4) Press SAVE
  • How do I reset my JBL Everest 310, 710 and 750 Elite headphones?
    With the headphones switched ON, press VOLUME + and VOLUME - , and hold them for 5 seconds. Your headphones are now reset to factory settings. This is true for Everest 310, 710, Elite 750, 310GA and 710GA.
  • How do I reset the Charge 4?
    In order to reset the Charge 4, with the unit on, press “Volume+” and “Bluetooth” at the same time for 3-4 seconds until you hear the audible chime.
  • How do I reset the Endurance Series Headphones?

    For all models except Endurance Peak:
    Press the headphone touch control located on the RIGHT ear loop for 15 seconds while the headphones are being charged.
    Note that resetting the Dive will not erase music contained in the MP3 memory.

    Endurance Peak reset: While the pods are being charged, tap the touch pad on the right pod once, then tap again and hold for approx 18 seconds, or until the LED blinks.

  • How do I see when my JBL E45BT or E55BT is fully charged?
    While charging, the charging indicator diode is lighting constantly. When charging is complete, the light goes out.
  • How do I skip tracks on the Everest 750NC?
    To skip the tracks forward, you press and hold the volume up button for 3 seconds. To skip tracks backward, press and hold the volume down button for 3 seconds.
  • How do I skip tracks on the Synchros E30?
    The track control button is located in the center of the inline microphone. This also serves as the pause/play button and enables you to answer and hang up phone calls. Two quick clicks on the center button will skip the tracks forward to the next song. Multiple quick clicks will skip the tracks backward. Compatibility may vary with some older phone models.
  • How do I skip tracks on the T205?
    Two quick clicks on the microphone will skip the track forward. Three quick clicks on the microphone will skip the track backward to the previous song.
  • How do I turn off my E45BT or E55BT?
    The on/off button is a spring-loaded slider button. Press the button upwards against the spring pressure, and hold it there for about three seconds. Now you will hear the "off" prompt sound in the headphone speakers, and the LED light goes out. Now the headphones are switched off. Please note that if you do not play music or press any button for about 10 minutes, the headphones will switch off automatically.
  • How do the neckband flex zones work?
    You can bend the ‘arms’ of the neck in and out to get the optimum fit for your exercise/level of activity. The flex zone is the black rubber part on the neckband.
< 1 ... 13 14 15 16 17 ... 38 >

Can’t find what you’re looking for?

Call Us

Call Us

Talk to a product expert
Call us now at: +855 15 512 512

NANO SOUND
+855 17 717 885
Email: Rottnaleang@gmail.com

Kfour Group Ltd.
078 88 72 82/ 069 82 87 82
Email: bunarong.kit@kfourgroup.com.kh