JBL EVEREST™ ELITE 750NC
Wireless Over-Ear Adaptive Noise Cancelling headphones
Sold from 2018 until now
Documents & Downloads
Product Specifications
- Driver size (mm)
- 40.0
- Driver sensitivity at 1kHz/1mW (dB)
- 92dB@1kHz, 1mW
- Dynamic frequency response range (Hz)
- 10Hz-22kHz
- Impedance (ohms)
- 16.0
- Number of drivers per ear
- 1.0
- Headphone cable length (cm)
- 120.0
- Headphone cable length (ft)
- 3.93
- Weight (oz)
- 9.88
- Bluetooth profiles
- HFP v1.6, HSP v1.2, A2DP v1.2, AVRCP v1.4
- Bluetooth frequency
- 2.402GHz-2.48GHz
- Bluetooth transmitted modulation
- GFSK, π/4-DQPSK, 8DPSK
- Bluetooth transmitter power
- 4 dbm
- Bluetooth version
- 4.0
- Charging time (hours from empty)
- 3
- Maximum music play time with ANC off (hours)
- 20.0
- Maximum music play time with ANC on (hours)
- 15.0
- Maximum play time (hours)
- 20
- TruNote
- Yes
- Adaptive Noise Cancelling
- Yes
- Ambient Aware
- Yes
- Built-in Microphone
- Yes
- Carrying case
- Yes
- Detachable Cable
- Yes
- Flat-fold design
- Yes
- Hands Free Call
- Yes
- JBL Legendary Pro Audio Sound
- Yes
- Leather headband
- Yes
- Over-ear
- Yes
- Rechargable battery
- Yes
- Controls on Ear Cups?
- Yes
- Speed charge
- Yes
- Wireless
- Yes
Smart enough to know that music doesn't need noise or wires.
Your life, your music, your comfort – the all-new JBL Everest Elite 750NC is truly shaped around you. Smartly engineered, enjoy wireless freedom with up to 20 hours of listening pleasure on a single charge. In Adaptive Noise Cancelling (ANC) mode, control what you want to hear for up to 15 hours. A 3-hour quick recharge, an echo cancelling microphone for hands-free calls, Legendary JBL Pro Audio Sound, compact hard carrying case and flat-fold design elevate these headphones to travel companion par excellence. Meticulously crafted from premium materials and conceived for a snug fit and long-lasting comfort, these sleek and elegant headphones come in metallic finishes and colors. The My JBL Headphones App features include over-the-air updates that future-proof these headphones, and TruNote™ Auto Sound Calibration that personalizes the audio performance based on ear cup fit, delivering the most authentic version of music possible. To customize these headphones, developers can unlock smart experiences with the Everest Elite 750NC by downloading the CES 2017 Innovation award winning JBL EVEREST ELITE SDK currently available at www.developer.harman.com. Dare to listen.
FAQs & How-Tos
-
Yes. Our Everest series headphones are made with synthetic protein leather which is a non-animal leather.Was this helpful? Thank you for your feedback!
-
No. The only way that the Noise Cancellation feature can be activated is while you are using the headphones wirelessly. You cannot use NC while the headphones are plugged into a device or charging.Was this helpful? Thank you for your feedback!
-
No. Unfortunately, you cannot connect to multiple devices on the 750NC Wireless headphones. You can pair to multiple devices, but can only be connected to one device at a time. The Everest 710 and 310 feature ShareMe 2.0, which permits listening to the same source over two headphones, wirelessly.Was this helpful? Thank you for your feedback!
-
No the audio cable included with the Everest series headphones has a one-button remote control with microphone. It does not have volume buttons. It can perform pause/play, and gives you the ability to answer and hang up phone calls. However, you can control the volume when the headphones are connected to a source device with Bluetooth, using the buttons on the ear cup.Was this helpful? Thank you for your feedback!
-
Sorry, neither AAC nor aptX are supported.Was this helpful? Thank you for your feedback!
-
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
If you are experiencing issues getting the app to communicate with your headphones, (assuming you have already paired the headphones with the device) go into the communication apps audio settings. You will likely find the resolution there. You may have to set your headphones as the ‘communication device’ within the app you are using.
Was this helpful? Thank you for your feedback! -
Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. If you are attempting to pair to a different device, make sure headphones are turned on, and press and hold the Bluetooth button located at the bottom of the right ear cup. The headphone should display on your new device within 3-5 seconds on your list of discoverable devices.Was this helpful? Thank you for your feedback!
-
With the headphones switched ON, press VOLUME + and VOLUME - , and hold them for 5 seconds. Your headphones are now reset to factory settings. This is true for Everest 310, 710, Elite 750, 310GA and 710GA.Was this helpful? Thank you for your feedback!
-
To skip the tracks forward, you press and hold the volume up button for 3 seconds. To skip tracks backward, press and hold the volume down button for 3 seconds.Was this helpful? Thank you for your feedback!
-
This headphone is supported by the My JBL Headphones App.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call us now at:
+855 15 512 512
NANO SOUND
+855 17 717 885
Email: Rottnaleang@gmail.com
Kfour Group Ltd.
078 88 72 82/ 069 82 87 82
Email: bunarong.kit@kfourgroup.com.kh