GRAND TOURING GTO 501EZ
1-Channel Power Amplifier (500 watts)
2012から現在まで販売
| 従来/現行製品: | GT5-A3011 |
|---|---|
| メイドインジャパン: | China |
GRAND TOURING GTO 501EZを始める
ドキュメントとダウンロード
製品仕様
- Series
- Grand Touring
- Type
- Mono/Subwoofer
- MSRP U.S.
- $239.95 each
- 4-Ohm Power Output
- 350W RMS x 1 channel at 4 ohms, 14.14V DC, less than 1.0% THD
- Peak Power
- 770W
- Frequency Response
- 10Hz-280Hz
- Maximum Current Draw
- 45A
- Signal-to-Noise Ratio
- >80dB
- 2-Ohm Power Output
- 500W RMS x 1 channel at 2 ohms, 14.4V DC, less than 1.0% THD
- Number of Channels/Type
- 1 Channel
- Weight (lb)
- 6.4
- Width (mm)
- 246
- Height (mm)
- 66
- Height (in)
- 2-9/16
- Weight (kg)
- 2.9
- Depth (in)
- 8-3/8
- Depth (mm)
- 213
- Width (in)
- 9-11/16
High-performance subwoofer power for enhanced sound on the move.
High-performance subwoofer power for enhanced sound on the move. The JBL® GRAND TOURING GTO-501EZ subwoofer amplifier provides unmatched ease of installation, configuration and calibration for clean, powerful sound. It connects to OEM or aftermarket systems without complicated adapters or setup routines. Use line-level (RCA) signals or speaker-level signals with RCA-to-bare-wire adapters – everything you’ll need is included in the box. Experience the clean and powerful output of GRAND TOURING GTO Series amplifiers in a variety of channel configurations and power ratings, all of which are CEA®-2006A compliant and backed by the JBL reputation for top quality.
The GTO-501EZ Class D mono subwoofer amplifier is rated to deliver 500 watts RMS at 2 ohms (770 watts max). High-efficiency Class D amplifier design ensures the most boom for the buck, all in a modestly sized chassis. It’s an impressive amount of power in an attractive, easily configured amplifier. The wide input range and low current draw make the amplifier ideal for adding a subwoofer to existing OEM or aftermarket systems.
The GTO-501EZ subwoofer amplifier includes an input-level switch, a setup CD with test signals and LED indicators to tell you when the setting is correct. Simply set the switch, turn the input-level knob and watch for the green light that indicates that the setup is perfect. That’s all there is to it. There’s a reason why the amplifier’s model number contains EZ. This feature significantly reduces installation time and delivers excellent results.
JBL engineers have configured the GTO-501EZ amplifier to turn on with a wired input (as in aftermarket systems) or with an auto-sensing circuit that activates whenever the amp detects an audio signal. The auto-sensing feature is helpful when you’re upgrading OEM audio systems that don’t include a remote trigger wire. It’s easily defeated by a switch when you’re using a wired remote turn-on input.
The GTO-501EZ amplifier accepts a wide range of inputs up to 15 volts with line-level or speaker-level signals. Using RCA-to-bare-wire adapters included with the amplifier, you can connect to virtually any OEM or aftermarket audio system. The end result is an amplifier that works with the widest range of cars on the road.
An active 12-decibel/octave low-pass crossover offers variable filter points between 40Hz and 280Hz. Importantly, all filter points on the adjustment dial match the silkscreened frequency points on the amplifier chassis – a feature that not all amps provide.
The GTO-501EZ provides a range of bass boost from 0 decibels to +12 decibels, centered at 45Hz. This is a useful feature for restoring some bass that may be limited by the low-frequency response of certain speakers in the system – or to enhance a particular range of bass that the speakers already produce well.
The high-efficiency, low-current and low-heat performance of Class D amplification ensures high power output from the GTO-501EZ subwoofer amplifier. It also minimizes any need for upgrades to your vehicle’s electrical system.
Amplifier protection is just like insurance; you hope you’ll never need it, but it’s sure nice to have it when you do. Thermal protection keeps the GTO-501EZ amplifier from overworking itself to the point of premature failure. Low-impedance protection keeps the amplifier safe from any speaker or wiring failures that result in short circuits.
The GTO-501EZ amplifier is compatible with the optional wired-remote bass control, which provides easy adjustment of subwoofer-channel bass levels from the front seat. The wired remote is easy to connect with a telephone-style jack and can be mounted in a variety of positions to suit the vehicle and location preferences.
画像＆ビデオ
なにかお困りですか？
こちらはコンシューマー向けJBL製品に関するお問い合わせ専用窓口となっておりますので、車載オーディオ機器については車両販売店様または車両メーカー様へ、プロフェッショナル機器についてはプロフェッショナル機器の販売店様・代理店様へのお問い合わせをお願いいたします。
チャットでのお問い合わせ
受付時間: 土日・祝日・年末年始を除く、平日9:30～17:30