



JBL Bar 5.1
Product Specifications
General Specifications
Total Maximum Power | 510W |
---|---|
Max SPL | 104dB |
Frequency Response | 35Hz to 20KHz |
Soundbar Weight | 3.9kg |
Subwoofer Weight | 13 Kg |
Surround Speaker Weight: | 0.6kg |
Dimension Specifications
Subwoofer Transducer Size | 254(mm) |
---|---|
Soundbar Transducer Size | 152.4 x 57.1(mm) racetrack drivers, 76.2 x 31.7(mm) tweeter |
Soundbar Dimensions (W x H x D) | 1148 x 58 x 93 (mm) |
Subwoofer Dimensions (W x H x D) | 305 x 440 x 305 (mm) |
Surround Speaker Dimensions (W x H x D) | 165 x 59 x 93 (mm) |
Control Connect Specifications
Audio inputs | 1 Analog, 1 Optical, Bluetooth |
---|
Documents & Downloads
Spec Sheets
Manuals
Quick Start Guide
Gallery








Videos
What’s in the Box
- Soundbar
- Wireless subwoofer
- 2 x Wireless surround sound speakers
- Remote control with battery
- Power cables (up to 5pcs depending on region SKUs)
- HDMI cable
- AUX cable
- Optical cable
- Calibration microphone
- Wall mount bracket kit
- Quick start guide
- Warranty card
- Safety sheet
FAQs & How-Tos
-
JBL Bar 2.1 and 3.1: surround channels?
It is not possible to add more speakers to the Bar 2.1 and 3.1 soundbars.
The surround speakers that are part of the Bar 5.1 can only be used with Bar 5.1.Was this helpful? Thank you for your feedback!
-
My TV turns off when I'm powering off my soundbar, why?
This is most likely due to CEC function. Some our soundbars supports CEC commands from your TV, and if some CEC commands will make the speaker react in a way you do not like, we suggest you disable all CEC functions from your TV. Please note, that your Soundbar will not turn on when your TV is turned on, due to disabling the CEC function.
Was this helpful? Thank you for your feedback!
-
Does the soundbar upscale my video to 4K resolution?
The soundbar passes through content from a 4K video source but does not upscale video to 4K.
Was this helpful? Thank you for your feedback!
-
What is the distance between wall-mounts on JBL BAR soundbars
The distance between wall-mounts centers are: JBL BAR Studio: 45 cm. JBL BAR 2.1: 70 cm. JBL BAR 3.1: 70 cm. JBL BAR 5.1: 61 cm JBL BAR 5.1 Surround: 71.85 cm JBL BAR 9.1: 55,5 cm
Was this helpful? Thank you for your feedback!
-
How can I reset the JBL Bar 2.1, JBL Bar 3.1 and JBL Bar 5.1?
Press and hold the Source, Vol+ and Vol- buttons at the same time until you see the text "reset" on the soundbar's display.
Was this helpful? Thank you for your feedback!
-
How do I pair the subwoofer to my JBL BAR soundbar if pairing does not happen automatically?
Normal pairing is automatic, and happens when you first switch both devices on. If pairing does not take place automatically, or you have to force new pairing, here is what to do: Turn on the soundbar and the subwoofer. If the connection is lost, the LED indicator on the subwoofer blinks slowly. Second, press the CONNECT button on the subwoofer to enter pairing mode. The LED indicator on the subwoofer blinks quickly. Third, press and hold the DIM DISPLAY button on the remote control for 5 seconds, followed by short press on BASS+, and BASS- button in sequence. Panel display will show “PAIRING”. If pairing succeeds, the LED indicator on the subwoofer lights up, and the soundbar display will show "DONE”. If pairing fails, the indicator on the subwoofer blinks slowly. Lastly, if the pairing fails, repeat the steps above. If you have continued trouble performing the pairing, please try to switch off all wireless devices in the home, then try again. This means routers, TV sets with wireless functions, telephones, computers etc. Since overcrowding on the 2.4 GHz frequency now often causes problems, eliminating all this activity makes space for the Bar to establish its connection, and you should be able to pair without problems. Afterwards, you can switch your devices on again. Often, all will now work fine, and if not, you will know which devices are doing the interference.
Was this helpful? Thank you for your feedback!
-
I can't listen to music on my JBL Soundbar while the TV is off. How can I change this?
The TV turns on with the soundbar. This is caused by CEC commands from your TV via the HDMI port. Please disable these functions on your TV, to use the soundbar while TV is off.
Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
To speak to our customer service specialist
1800-102-0525
Mon - Sun: 10:00 am - 7:00 pm (IST)