JBL Partybox 110
Portable party speaker with 160W powerful sound, built-in lights and splashproof design.
Sold from 2022 until now
Getting started with your JBL Partybox 110
Documents & Downloads
Product Specifications
- Output power (W)
- 160
- Dynamic frequency response range (Hz)
- 45Hz - 20KHz (-6dB)
- Dimensions (cm)
- 29.5 x 56.8 x 30.0
- Dimensions (in)
- 11.6 x 22.4 x 11. 8
- Weight (kgs)
- 10.84
- Weight (lbs)
- 23
- Bluetooth profiles
- A2DP 1.3, AVRCP 1.6
- Bluetooth frequency
- 2.4 GHz - 2.4835 GHz
- Bluetooth transmitted modulation
- GFSK, π/4 DQPSK, 8DPSK
- Bluetooth transmitter power
- ≤ 15 dBm (EIRP)
- Bluetooth version
- 5.1
- Charging time (hrs)
- 3.5
- Maximum music playing time (hrs)
- 12
- Bluetooth
- Yes
- Charging cable
- Yes
- Lightshow
- Yes
- Waterproof
- Yes
- Wireless
- Yes
- Rechargable battery
- Yes
- IPX
- IPx4
Start a party with powerful sound and a dynamic light show
Bring a whole new dimension to any party with the unique dynamic LED lightrings, synced to the powerful sound and deep bass of the PartyBox 110. Take the PartyBox wherever you go with the splashproof design and plug in a guitar and mic for the ultimate immersive experience. With Bass Boost and loud, powerful JBL Original Pro Sound, your friends won't just hear the music, they'll feel it as 12 hours of playtime keeps the party rocking all day or night. Use the PartyBox app for total control as you stream your tunes wirelessly.
FAQs & How-Tos
-
Demo mode
- Press the Play and Boost button at the same time for 5 seconds.
- Depending on what state your JBL Partybox is in, either you enter Demo mode or disabling it.
- NOTE: In Demo mode, you cannot use the JBL Partybox as most features and buttons are not working.
Was this helpful? Thank you for your feedback! -
It is possible to pair two of the same model of JBL PartyBox speakers together through TWS (True Wireless Stereo) mode.
PartyBox On-The-Go/100:
Connect just the left PartyBox with the chosen device first, with the right PartyBox turned off. The speaker that is connected first will automatically be the left channel. Now turn the right PartyBox on and continue with TWS pairing (detailed below).
PartyBox 200/300/1000:
A button (L/R) on the rear of the speakers is used to assign the correct channel to the speakers after pairing is made.
In order to activate TWS mode, press and hold the Bluetooth button on the first speaker until the notification chime sounds, about 5 seconds. Then press and hold the Bluetooth button on the second speaker until the notification chime sounds (as seen below). TWS mode is now activated. To disable TWS, press and hold the Bluetooth button on either speaker, or power off one speaker.
Partybox 110/310/710/Encore/Essential:
Press the buttons labelled TWS on both speakers to connect the speakers in TWS mode (pictured in item 2 in the image below, with two speakers on the button).
TWS can be activated and deactivated remotely in the JBL Partybox app, in addition to assigning the left and right channels to the correct speakers.
Once the TWS connection is setup, it will be in Stereo mode by default if both speakers are the same model, otherwise the speakers will be in Party mode by default if different Partybox models are used. You can also switch between Stereo and Party mode in the JBL PartyBox app if two of the same Partybox models are used.
Please note: In order to achieve TWS mode, the speaker must be the same model with the exception of the PartyBox 200 and PartyBox 300 which can be paired together via TWS. You cannot achieve TWS with a PartyBox 1000 and a PartyBox 300. You cannot achieve TWS with a PartyBox 100 and PartyBox 200. However, it is possible to connect a maximum of two of either the Partybox 110, 310, 710 or Encore/Essential together in Party mode - the two speakers then do not need to be the same model, but Stereo mode will not be possible.Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
To speak to our customer service specialist
1800-102-0525
Mon - Sun: 10:00 am - 7:00 pm (IST)