JBL PartyBox 100

JBL PartyBox 100

Powerful portable Bluetooth party speaker with dynamic light show

Getting started with your JBL PartyBox 100

Getting started with your JBL PartyBox 100

Quick Start Guide

Get up and running in no time with our easy-to-follow Quick Start Guide

Product Registration

Register your product

Do you own this product? Register it here! And claim your warranty or service easily

Register now

Documents & Downloads

Product Specifications

Output power (W)
160
Dynamic frequency response range (Hz)
45Hz-18kHz
Dimensions (in)
11.3 x 21.7 x 11.4
Dimensions (cm)
28.8 x 55.1 x 29
Weight (kgs)
9.7
Weight (lbs)
21.4
Bluetooth version
4.2
Charging time (hrs)
6.5
Maximum music playing time (hrs)
12
Battery capacity (mAh)
2500
Lightshow
Yes
Charging cable
Yes
3.5 mm audio cable Input
Yes
JBL Signature Sound
Yes
Wireless
Yes
Rechargable battery
Yes
Bluetooth
Yes
Note
The product is in compliance with the European Union energy legislation. 1) Bluetooth connection mode - The product is intended to be used for streaming music via Bluetooth connection. A consumer can stream Bluetooth audio to the speaker. When the product is connected through Bluetooth, the Bluetooth connection must remain active at all times to ensure proper operation. The product will enter into sleep mode (networked standby), after 20 minutes without operation, the power consumption @ sleep is less than 2.0 Watts, after which it can be re-activated via Bluetooth connection. 2) Bluetooth disconnection mode - The product will enter into standby mode, after 20 minutes without operation, the power consumption @ standby is less than 0.5 Watts.
China
-

Be Loud, Be Proud, Be Ready To Party!

Bring the party with the portable power of JBL PartyBox 100. Ignite the night. Pick the perfect light show or let the music choose the mood. Mix it up. Pop in a playlist from your USB stick or stream from a Bluetooth-compatible device. Rock out on the fly with mic and guitar inputs. Find your sweet spot. Mount your speaker on a pole and immerse the room in dynamic JBL sound. Go all night with up to 12 hours of battery life. Plug your speaker into the wall to keep the tunes flowing.

Kick out the hottest jams in town. JBL PartyBox 100 thumps out 160 Watts of that pounding JBL signature sound. Start the party whenever and wherever you need.
Boost your party with an epic light show. Choose from several RGB LED light patterns or let the colors groove to the music for a next-level audio-visual party.
Rock on from sunup to sundown with a massive battery life, up to 12 hours*.
Have mic, will sing. Have guitar, will shred. Just plug into your speaker, take to the stage and rock that party like there's no tomorrow.
It's easy to keep the music flowing. Simply connect to your smartphone, tablet, or favorite online service via any Bluetooth-compatible device for uninterrupted wireless streaming.
Personalize your party. Build your ultimate party sounds from the ground up. Just make your playlist, pop it on a USB-capable thumb drive and slip it into your speaker.
One speaker just not enough? Link up to two compatible party speakers with True Wireless Stereo (Bluetooth)
A speaker that rises to the occasion. Mount your JBL PartyBox 100 on a post for a dynamic, immersive party sound that really rocks the crowd.

FAQs & How-Tos

10 results
  • It is very simple to connect to your Car with the JBL Partybox 200 or 300. Use the included cable that connects through the cigarette connector in your Car and power on the Partybox! Please note that the 12V connection does not charge the battery in the Partybox 300 - it will only power the Partybox when in use. To charge the battery, it will have to be plugged into AC power ( 110 - 230V )
  • Demo mode

    1. Press the Play and Boost button at the same time for 5 seconds.
    2. Depending on what state your JBL Partybox is in, either you enter Demo mode or disabling it.
      1. NOTE: In Demo mode, you cannot use the JBL Partybox as most features and buttons are not working.
    Demo mode
  • Bluetooth Pairing

    1. Press the BT button button on the Partybox to start the pairing process.
    2. Grab your mobile device.
    3. Go to settings --> Bluetooth --> Enable Bluetooth --> BT ON
    4. Find the Partybox speaker you want to establish a Bluetooth connection to.
             BT settings
    1. You now have a successful connection and can stream your favorite music.
      1. NOTE: It is only possible to have two devices connected at the same time and if you want to listen through the second Bluetooth device then stop the current one from playing and use the second device.
      2. To stop Bluetooth broadcasting then insert a USB device.
    BT con
    1. Finding the software version

      1. Press and hold the 'Volume-' and 'Bass Boost' buttons for 5 seconds.
      2. A voice will start prompting numbers which indicates the current software version.
      PBFW_Announce.png
    2. USB Stick

      1. Get an empty USB str stick with speed of 2.0.
      2. Make sure it is formatted with FAT16 or FAT32.
      3. Your Music files can only be: MP3 (32-320kbit/s), WMA(32-320kbit/s) and wAV(44.1K/48K/192K).
      4. The Partybox supports up to 8 subfolders.
      5. It will be played in alphabetic sequence with main folders first then subfolders.
      6. To skip songs forward, double press the Play/Pause button. To skip back, triple press the Play/Pause button.
    3. Resetting the Partybox to Factory Settings

      1. Press and hold "Play/Pause" and "Volume +" down for > 10 seconds.
      2. The JBL Partybox will power off and back on and is now reset.
    4. This model is not supported by the JBL Partybox App.
    5. It is possible to pair two of the same model of JBL PartyBox speakers together through TWS (True Wireless Stereo) mode.

      PartyBox On-The-Go/100:
      Connect just the left PartyBox with the chosen device first, with the right PartyBox turned off. The speaker that is connected first will automatically be the left channel. Now turn the right PartyBox on and continue with TWS pairing (detailed below).

      PartyBox 200/300/1000:
      A button (L/R) on the rear of the speakers is used to assign the correct channel to the speakers after pairing is made.
      In order to activate TWS mode, press and hold the Bluetooth button on the first speaker until the notification chime sounds, about 5 seconds. Then press and hold the Bluetooth button on the second speaker until the notification chime sounds (as seen below). TWS mode is now activated. To disable TWS, press and hold the Bluetooth button on either speaker, or power off one speaker.
      PBTWS1new.png
      Partybox 110/310/710/Encore/Essential:
      Press the buttons labelled TWS on both speakers to connect the speakers in TWS mode (pictured in item 2 in the image below, with two speakers on the button).
      PBTWS2.png
      TWS can be activated and deactivated remotely in the JBL Partybox app, in addition to assigning the left and right channels to the correct speakers.
      Once the TWS connection is setup, it will be in Stereo mode by default if both speakers are the same model, otherwise the speakers will be in Party mode by default if different Partybox models are used. You can also switch between Stereo and Party mode in the JBL PartyBox app if two of the same Partybox models are used.

      Please note: In order to achieve TWS mode, the speaker must be the same model with the exception of the PartyBox 200 and PartyBox 300 which can be paired together via TWS. You cannot achieve TWS with a PartyBox 1000 and a PartyBox 300. You cannot achieve TWS with a PartyBox 100 and PartyBox 200. However, it is possible to connect a maximum of two of either the Partybox 110, 310, 710 or Encore/Essential together in Party mode - the two speakers then do not need to be the same model, but Stereo mode will not be possible.
    6. You can have your own Karaoke party with your JBL Partybox. Simply connect your Microphone (only included with the Partybox On The Go) and connect your mobile device over Bluetooth, then start playing music and sing along, it is that simple!
    7. Connecting a USB stick

      1. You can enjoy music from your USB Stick directly into the Partybox device.
      2. Insert the USB stick Stick into theUSB portport, located on the back of your Partybox.
      3. The USB Stick has to be formatted FAT16 or FAT 32 and supports MP3, WAVE and WMA Music files.
      4. It will start automatically playing the content on your USB stick.
      USB co

      AUX Connection

      1. You can connect any devices through the analog connection AUX
      2. Use an analog cable (Not included in the box) and connect your device.
      3. Press play on your external device and enjoy the music!
      analog

      RCA Connection (*Partybox 200/300/1000 Only)

      1. The Partybox features both Input and Output RCA connection.
      2. Connect your RCA cable (not included) to either one of the ports.
      3. You can use it with your DVD/BlueRay player or AVR system.
      User-added image

      Guitar and Microphone

      1. Connect your microphoneto the dedicated MIC iocn port or connect your electric Guitar  to the Guitar icon
      2. You can mix sound or make your own karaoke party with your Partybox.
      3. Sing or play through your devices.
        1. To adjust the volume of the audio source, press volume+ or volume- buttons.
        2. To adjust the volume of the microphone or guitar, rotate the Mic knob or guitar knob
      mic and
       

      Charging external devices

      1. Whenever your mobile device needs some extra power, the Partybox can help you!
      2. Featuring a USB Charging port for both Music (USB on a stick) or when you need to charge your Phone charging device.
      3. Simply connect your device to the usb portaport and start charging.
        1. NOTE: The Partybox 200 needs to be connected to AC power all the time to charge or function as a speaker.
        2. The Party 300/310 has a battery and can charge any device without needing AC power (unless the product's battery is depleted then you need to recharge via AC power).
      Charging devices

      There are many ways to enjoy your JBL Partybox On-The-Go, 100, 200, 300, 310 & 1000. The options are endless and you are in control of the party

    Can’t find what you’re looking for?

    Call Us

    Call Us

    To speak to our customer service specialist

    1800-102-0525

    Mon - Sun: 10:00 am - 7:00 pm (IST)

    E-mail Us

    E-mail Us

    Email our customer service team
    365 days, we will reply within 24 hours

    Email us
    message

    WhatsApp Us

    Chat with a support agent via Whatsapp at:
    by clicking https://bit.ly/2SfFSPh or send hi to 91 70658 44446 

    Mon - Sun: 10:00 am - 7:00 pm (IST)