JBL Playlist
Wireless speaker with Chromecast built-in
Sold from 2016 until now
Getting started with your JBL Playlist
Quick Start Guide
Get up and running in no time with our easy-to-follow Quick Start Guide
Register your product
Do you own this product? Register it here! And claim your warranty or service easily
Register nowDocuments & Downloads
Product Specifications
- Transducers
- 2 x 57mm woofers
- Rated power
- 2 x 15W
- Frequency response
- 60Hz ~ 20kHz (-6dB)
- Signal-to-noise ratio
- >80dB
- Input connections
- WiFi, Bluetooth®, Aux-in
- Weight
- 120g
- Power supply
- 100-240VAC,50/60Hz,30Watts
- Power consumption in sleep mode
- <2.0 Watts
- Note - The JBL Playlist is intended to be used for streaming music via Bluetooth and Wi-Fi technology. This product is designed to be instantly on and ready to play music at a moment's notice. The JBL Playlist is in compliance with the European Union energy legislation. It will enter into sleep mode (networked standby) after 10 minutes without operation, after which it can be re-activated via Bluetooth or Wi-Fi.
- Product Dimensions (W x D x H)
- 316mm x 147mm x 131mm
- Packaging Dimensions (W x D x H)
- 350mm x 240mm x 140mm
- Bluetooth® version
- 4.2 version
- Bluetooth® transmitter frequency range
- 2402 − 2480MHz
- Bluetooth® transmitter power
- <4dBm
- Bluetooth® transmitter modulation
- GFSK, π/4 DQPSK, 8DPSK
- 5G Wi-Fi transmitter frequency range
- 5.15~5.35GHz, 5.470~5.725GHz, 5.725~5.825GHz
- 5G Wi-Fi transmitter power
- <20dBm (EIRP)
- 5G Wi-Fi modulation
- OFDM, BPSK, QPSK, 16QAM, 64QAM, 256QAM
- 5G Wi-Fi network compatibility
- IEEE 802.11 n/ac
- 2.4G Wi-Fi transmitter frequency range
- 2412 – 2472MHz (2.4GHz ISM Band, USA 11 Channels, Europe and others 13 Channels)
- 2.4G Wi-Fi transmitter power
- <20dBm (EIRP)
- 2.4G Wi-Fi modulation
- OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM
- 2.4G Wi-Fi network compatibility
- IEEE 802.11b/g/n
- China
- -
Easily cast millions of songs to an extraordinary sounding speaker
JBL Playlist speakers have Chromecast built-in, so you can instantly cast music from your favorite music app, radio, or podcast to your speaker using your smart device. You can control the speakers from anywhere in the house on your iOS or Android device(s) in the house on your device(s) -- iPhone®, iPad®, Android™ phone or tablet, Mac® or Windows® laptop, or Chromebook.
With Chromecast built-in, just tap the Cast button from your favorite mobile music apps to instantly start playing on the speakers. Then control the speakers right from your phone -- search, play, pause, and turn up the volume -- anywhere in the house.
Choose from millions of songs from popular music services like Spotify, Pandora, Google Play™ Music, TuneIn and iHeartRadio or catch up on current events with NPR podcasts. New apps are constantly being added so there’s no end to the music, online radio stations, and podcasts you can enjoy. Discover more at https://www.google.com/cast/apps/.
Play Spotify through your speakers, laptop and TV, using the Spotify app as a remote. Use the "One Touch" Play feature on the Playlist speaker to play your favorite playlist instantly.
Chromecast streams directly from the cloud, so you get the highest sound quality. Enjoy crystal clear sound exactly the way the artists intended.
With Chromecast built-in, you can keep using your phone while you cast your music. Answer a phone call, play a game, send a text, and even leave the room, all without interrupting what’s playing on the speakers or draining your battery.
Easily set up your system and control multi-room playback with the Google Home app. A step by step guide allows you to quickly start streaming your music.
Supports the latest wireless home networking technology and dual band (both 2.4GHz and 5GHz) Wi-Fi connection, resulting in a faster, robust and more stable wireless connection
Connect any device via Bluetooth or 3.5mm input
FAQs & How-Tos
12 results
-
Yes, the JBL Playlist can be reset to factory settings. First, Power ON the JBL Playlist. Secondly, press and hold the Play and Volume (-) buttons simultaneously for about 10 seconds, and after 10 seconds you should see the Play/Pause and Bluetooth button light up, followed by the speaker going into Standby. Once you see the speaker powers back ON, reset is complete.Was this helpful? Thank you for your feedback!
-
Yes, that’s the best part about this speaker, there are so many options. Besides streaming over Wi-Fi, the JBL Playlist also offers a Bluetooth connection and an AUX inputWas this helpful? Thank you for your feedback!
-
JBL Playlist: Yes, it can be used with Bluetooth out of the box, and also Chromecast (setup is done via Google Home, but speaker does not have Google Assistant built-in) JBL Link Bar: Yes, it can be used with Bluetooth and Chromecast after setting the bar up with a Google account - choosing not to activate the Google Assistant. JBL Link Music: No, this speaker requires setup via Google Home JBL Link Portable: No, this speaker requires setup via Google Home JBL Link 10, 20 and Link View: No, these speakers requires setup via Google Home Harman Kardon Citation series: No, this speaker requires setup via Google Home Harman Kardon Allure: Yes, Bluetooth is available from factory settings. Every time it is powered on and off, the speaker will say "Now in setup mode, follow the instructions in the Harman Kardon Alexa App." Harman Kardon Allure Portable: Yes, Bluetooth will be available after initial setup in the Harman Kardon Alexa App. This means that you have to log in with your Amazon account at first, and if you do not want to use the Alexa assistant, log out of you Amazon account afterwards. Harman Kardon Astra: Yes, Bluetooth will be available after initial setup in the Harman Kardon Alexa App. This means that you have to log in with your Amazon account at first, and if you do not want to use the Alexa assistant, log out of you Amazon account afterwards.Was this helpful? Thank you for your feedback!
-
If the Wi-Fi indicator has all 3 LED lights on, then the signal to the speaker is extremely good, and if only 2 LED light up, then the signal will be good. If you only have 1 LED light or No LED light we suggest moving the speaker to a different location for a better Wi-Fi signal and better audio experience.Was this helpful? Thank you for your feedback!
-
By using Google Home app, and if a software is available then the app will notify you about the newest software available. Google Home app can be downloaded from Apple Play Store or Google Play Store.Was this helpful? Thank you for your feedback!
-
You can have 3 smart devices connected at the same time and by pressing play on either one of the sources (smart devices) will start streaming music. The speaker can remember up to 8 paired smart devices and when this buffer is full it will release the first added device in connected sequences. Resetting the speaker will also clear this buffer.Was this helpful? Thank you for your feedback!
-
To use the Spotify Connect feature for JBL Playlist, a premium Spotify account is required. Please visit www.Spotify.com/freetrial for 30 days of complimentary premium account trial for first time users.Was this helpful? Thank you for your feedback!
-
Close and restart the Google Home app, or restart your phone. Start the Google Home app again, and the speaker should now appear.
Was this helpful? Thank you for your feedback! -
If you see this message, you must download the Device Utility app from the Google Play Store. Follow the instructions in the app to activate your speaker, and then return to the Google Home app to complete the setup.
Was this helpful? Thank you for your feedback! -
If the network does not appear, you can manually type in the network name (SSID) and password to connect.
Was this helpful? Thank you for your feedback!
Images & Videos
Can’t find what you’re looking for?
Call Us
To speak to our customer service specialist
1800-102-0525
Mon - Sun: 10:00 am - 7:00 pm (IST)
Chat with us
8:30 am - 6:30 pm (IST)
WhatsApp Us
Chat with a support agent via Whatsapp at:
by clicking https://bit.ly/2SfFSPh or send hi to 91 70658 44446
Mon - Sun: 10:00 am - 7:00 pm (IST)