


JBL Go 3
JBL Go 3 features bold styling and rich JBL Pro Sound. With its new eye-catching edgy design, colorful fabrics and expressive details this a must-have accessory for your next outing. Your tunes will lift you up with JBL Pro Sound, it’s IP67 waterproof and dustproof so you can keep listening rain or shine, and with its integrated loop, you can carry it anywhere. Go 3 comes in completely new shades and color combinations inspired by current street fashion. JBL Go 3 looks as vivid as it sounds.
Product Specifications
General Specifications
Bluetooth version | 5.1 |
---|---|
Maximum music playing time (hrs) | 5 |
Output power (W) | 4.2 |
Audio Specifications
Dynamic frequency response range (Hz) | 110 Hz - 20 kHz |
---|
Dimension Specifications
Dimensions (cm) | 8.6 x 6.9 x 4.0 |
---|---|
Dimensions (in) | 3.4 x 2.7 x 1.6 |
Weight (kgs) | 0.209 |
Weight (lbs) | 0.46 |
Control Connect Specifications
Bluetooth profiles | A2DP 1.3, AVRCP 1.6 |
---|---|
Bluetooth frequency | 2402 MHz − 2480 MHz |
Bluetooth transmitted modulation | GFSK, π/4 DQPSK, 8DPSK |
Bluetooth transmitter power | ≤ 8 dBm (EIRP) |
Documents & Downloads
Spec Sheets
Quick Start Guide
Gallery









Videos
What’s in the Box
- 1 x JBL Go 3
- 1 x Type-C cable
- 1 x Quick-Start Guide
- 1 x Safety Sheet
- 1 x Warranty Card

FAQs & How-Tos
-
Track Control Information
To skip tracks forward, double click the PAUSE/PLAY to advance to the next track. Please note: You can only skip tracks forward. This speaker does not have the capability to skip to the previous track.
Was this helpful? Thank you for your feedback!
-
Multi-Point Connection Support
This product features Multi-Point Connection which allows you to be connect to two devices at the same time. Effortlessly switch from listening to music on your portable device to a call from your phone.
To connect to two devices at the same time:
1. Power on your product.
2. Make sure that the device you wish to connect to has the BT settings on and within range.
3. If this is the first time connecting your product, you will notice a flashing LED to indicate that it is searching for a device to connect to. (If this is not your first time, your product will automatically reconnect to the last device it was connected to)
4. Under your BT settings, go to discoverable devices and the product name should pop up within a few seconds. Depending on the device you are using, you may have to tap on the product to complete the connection.
5.Now that you are connected to the first device, push the BT button on the product to connect to the second device. The product should start searching for the second device by displaying a flashing LED.
6. Go to your BT settings on your second device. The product should pop up on your discoverable devices should pop up within a few moments.
(Please Note: If the product does not show up on your discoverable devices while it is in pairing mode, quickly turn off your BT settings and turn it back on. This will typically result in resetting the BT search in which your product should pop up on discoverable devices within a few moments)
Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
To speak to our customer service specialist
1800-102-0525
Mon - Sun: 10:00 am - 7:00 pm (IST)