JBL Control X Wireless
|Finish||Graphite / White / Red|
|Rated Power||30W per channel RMS (AC mode)|
|Signal-to-noise ratio||>75 dB|
|Power supply||AC 100-240 VAC, 50-60Hz|
|Battery Type||Lithium-ion Polymer (7.4V, 2600mAh)|
|Battery Charge Time||2.4 hours @ 0.5C|
|Playback Time||Up to 4 hours (varies by volume level and audio content)|
|Bluetooth® Transmitter Power||0-4 dBm|
|Bluetooth® Transmitter Frequency Range||2.402 – 2.480 GHz|
|Bluetooth® Transmission Range||Up to 10m (from source)|
|Speaker Range||Up to 30m (between primary and secondary speakers)|
|Dimensions||9-1/4" x 6-1/2" x 6-1/4" (235mm x 165mm x 159mm)|
|Frequency Response||62Hz - 20kHz (-6db)|
|Weight (kg)||2.95 kg|
|Weight (lb)||6.5 lbs|
|High-Frequency Transducer||1" (25mm) CMMD® Lite dome tweeter|
Documents & Downloads
What’s in the Box
- 2 x JBL Control X Wireless Speakers
- 2 x Power Cords
- 2 x Removable Grilles
- Quick Start Guide
- Safety Sheet
FAQs & How-Tos
When Alarm goes on, the phone it is not playing on the JBL Control X
Alarm sound function in Bluetooth connectivity is not supported in iOS devices, however it is supported in Android devices.
Can i connect more than one Bluetooth device to my Control X wireless?
No, you can only have one activate device connected to the speaker. Please un-pair your current Bluetooth device, then connect with another device if needed.
Can I get a wall bracket for Control X Wireless?
Please note that although the Wireless version of Control X does have a threaded insert for brackets, JBL offers no brackets. The brackets for the Control X passive model cannot be used with the wireless version. Brackets for the wireless version must be custom made.
When two pairs of JBL Control X Wireless are associated, how can I unlink them to two separate pairs, if I do not turn off the primary speaker first?
This is addressed in the owner's manual. After associating a group of four speakers, when deciding to go back to normal operation as two pairs, it is recommended to reset them to factory default settings, which requires associating speaker pairs again.
Can I mix my speakers, connecting a black speaker with a red speaker?
Speakers are associated with each other from the factory. If one of them fails, and you get a replacement, then you will need to follow the association section in the owner's manual, so you can pair your new speaker with the one you have. We do not recommend doing this to mix differently colored speakers, only if one of them becomes defective.
Can I reset my Control X Wireless?
Yes, on the master speaker (the one with playback buttons), simply press the Reverse and Forward Play buttons at the same time for 3 seconds. Please note that after you have performed the reset procedure, master and secondary speakers are no longer connected. Go to the owner's manual page 4, the section "speaker association", to pair the secondary and master again.
When reaching max volume on the source, I do not hear the max volume audio prompt on the JBL Control X Wireless
In Bluetooth, there may be a small difference between the telephone (source) and the JBL Control X wireless unit. This means that they are not using the same scale. In any case, the difference will remain within one audio step on the phone or speaker.
Pressing Play/Pause button in short period of time is not resuming or pausing music right away
With some of the new mobile devices, pressing the Play/Pause button seems not to work, as devices require longer time to receive confirmation of the action. Please check on the JBL Control X wireless top panel LED indication that the command is received and acknowledged before pressing the Play/Pause command again. It can result in having to press the button two times quickly to activate the proper command before command acknowledgement times out.