NOTE:  LINK speakers must be set up on a WiFi network before Bluetooth can be activated. Once it is set up, you can use Bluetooth anywhere (Unless you reset the speaker and start all over with installation).

Pairing issues with a Smartphone or Tablet:

1. First try to restart the Bluetooth connection on your source device (Smartphone/tablet) by switching Bluetooth off and on again with a short pause in between.
2. Forget previous paired connection (on your smartphone/tablet) in your Bluetooth settings if you once had paired with our product.
3. Try to restart source device(Smartphone/tablet) by powering it off and on again, and after restart try to establish a Bluetooth connection to your JBL LINK device.
4. If above does not work, then try to restart your JBL LINK device by turning it off and on again.
5. Press and hold down the Bluetooth button on your JBL LINK device to initiate pairing mode again.
6. Go into Bluetooth settings on your Smartphone/tablet.
7. Perform a restart or reset if you are not able to connect after above steps.

Back to helpful articles --> Articles overview

JBL LINK Bluetooth specifications:

• Bluetooth version 4.2
• A2DP v1.3 with SBC Audio Codec.
• AVRCP v1.5

At the bottom of your Horizon alarm clock, you will see a little cap where the backup-battery resides. Turn the cover lid left to open it, and on the back of the cover lid, you will see the serial number.

Connecting a USB stick

1. You can enjoy music from your USB Stick directly into the Partybox device.
2. Insert the Stick into theport, located on the back of your Partybox.
3. The USB Stick has to be formatted FAT16 or FAT 32 and supports MP3, WAVE and WMA Music files.
4. It will start automatically playing the content on your USB stick.

AUX Connection

1. You can connect any devices through the analog connection
2. Use an analog cable (Not included in the box) and connect your device.
3. Press play on your external device and enjoy the music!

RCA Connection (*Partybox 200/300/1000 Only)

1. The Partybox features both Input and Output RCA connection.
2. Connect your RCA cable (not included) to either one of the ports.
3. You can use it with your DVD/BlueRay player or AVR system.

Guitar and Microphone

1. Connect your to the dedicated port or connect your electric   to the
2. You can mix sound or make your own karaoke party with your Partybox.
3. Sing or play through your devices.
   1. To adjust the volume of the audio source, press volume+ or volume- buttons.
   2. To adjust the volume of the microphone or guitar, rotate the or

 

Charging external devices

1. Whenever your mobile device needs some extra power, the Partybox can help you!
2. Featuring a USB Charging port for both Music (USB on a stick) or when you need to charge your device.
3. Simply connect your device to the port and start charging.
   1. NOTE: The Partybox 200 needs to be connected to AC power all the time to charge or function as a speaker.
   2. The Party 300/310 has a battery and can charge any device without needing AC power (unless the product's battery is depleted then you need to recharge via AC power).

There are many ways to enjoy your JBL Partybox On-The-Go, 100, 200, 300, 310 & 1000. The options are endless and you are in control of the party

JBL Xtreme, JBL Pulse 2, JBL Charge3, JBL Flip 3, Pulse 3, and Flip 4 Android, Google Now, Google Play are trademarks of Google Inc. Siri, iTunes, and Apple Music are trademarks of Apple Inc. Spotify is a registered trademark of Spotify AB. IOS is a registered trademark of Cisco in the US and is used by Apple under license.

JBL Quantum 300, 350, 400, 600, 610, 800, 810 ONE, TWS and Stream are working with the QuantumENGINE

The “Speaker” mode allows the JBL QuantumENGINE to receive more than two channels of audio. It also prevents some applications from adding extra signal processing intended for other headphones, which would negatively impact the performance of the JBL QuantumSURROUND or JBL QuantumSPHERE 360 technology.

Make sure the headset volume control is turned up. Rotate the volume wheel on your headset to increase the volume. If you're connected to the PC via USB, check that the default device is selected under Control Panel > Sound > Playback. Select JBL Quantum 400 Game, right-click, and select "Set as Default Device".  Check on the top bar of the JBL QuantumENGINE whether your headset's game-chat balance dial is set correctly. Check the JBL Quantum 400 Game device and make sure it is not muted or turned all the way down.

Make sure the volume is turned up and that the correct device has been selected in the system sound settings. Check the computer volume levels and make sure it is not muted or turned all the way down.

Make sure the volume control on the headset is turned up. Rotate the volume wheel on your headset to increase the volume. If you're connected to the PC via USB, check that the default communication device is selected under Control Panel > Sound > Playback. Select JBL Quantum ONE Chat, right-click, and select "Set as Default Commuication Device". Check your headset's game audio chat balance dial, and ensure that the balance is correct. Check the JBL Quantum ONE Chat device and make sure it is not muted or turned all the way down.

Make sure the headset volume control is turned up and your microphone is unmuted. Check that only one voice chat application is in use while in-game. If you're connected to the PC, make sure that the communication device is selected under Control Panel > Sound > Recording. Select the JBL product and select "Set as Default Device". Check on the top bar of the JBL QuantumENGINE whether your headset's game-chat balance dial is set correctly.

We believe the baseline performance of the QuantumSPHERE technology is cutting edge in terms of localization. The calibration feature improves upon this performance by calibrating the system to your individual anatomy.

The internal cable is about 5 cm long, including the micro-USB plug. The flexible part is about 2.4 cm. This length has been chosen to permit the case to be closed without the cable being in the way, or be closed with a pair of in-ear headphones inside the box. In-ear types with big battery boxes or remote controls may not fit inside the closed case. On-ear or over-ear types will often have the charging socket placed in such a manner that you can arrange the cable to reach the socket.

Using Wi-Fi allows you to listen to your music in a higher sound quality since Bluetooth protocol compresses the audio signal, where Wi-Fi data easily stream HD Audio content. Take calls without interrupting your current audio music, where Bluetooth will interrupt the stream, because it is a one-way protocol. Control your music from anywhere in the house, where Bluetooth have a limited range. Play the same music across multiple speakers and when using the newest connect features, such as Spotify Connect or Chromecast built-in, then you don't have to worry about battery life, since the devices playing is doing all the data transmission compared to Bluetooth, where it is data between source and device.

This speaker will go to standby mode after 10 minutes inactivity. It turn on when you start playing to it again.