How To
How To
264 results
-
The UA React headphones do not support AptX™ and AptX HD™ audio codecs.Was this helpful? Thank you for your feedback!
-
To receive a call, press the power/pairing button on the controller for 1 second.Was this helpful? Thank you for your feedback!
-
As the headphones are charging, you will see a red solid light indicator on the controller. Once the unit is fully charged, the red light will turn off.Was this helpful? Thank you for your feedback!
-
The UA React headphones comes with 3 different ear tips and enhancers to ensure the best fit!Was this helpful? Thank you for your feedback!
-
TalkThru Technology allows you to clearly hear others for quick conversations without removing your UA React headphones. To activate TalkThru mode, press the Bionic Hearing button on the controller once. You will hear a tone, and your music level will lower when TalkThru Technology is engaged. To revert back to normal volume, simply press the Bionic Hearing button again.Was this helpful? Thank you for your feedback!
-
You will be able to control the volume by pressing the volume + and volume- buttons located on the controller.Was this helpful? Thank you for your feedback!
-
Yes. The UA React features an IPX7 rating which offers full protection from sweat and water. They can be fully submerged for up to 30 minutes.Was this helpful? Thank you for your feedback!
-
To receive a call, press the center button located in between the volume- and volume+ button for 1 second.Was this helpful? Thank you for your feedback!
-
To use the headphones, they cannot be charging. You should receive 16 hours of battery life. The UA Train also features the quick charge battery which allows you to receive 1 hour of battery life after charging for 5 min.Was this helpful? Thank you for your feedback!
-
Yes, The UA Train ear cushions can be removed and washed. To remove the ear cushions, peel cushion away from ear cup center. Hand wash the ear cushions only with liquid soap for 5 minutes. Swish in soapy water, then swish through clean water until there are no more soap suds. Wait for ear cushions to fully dry, and gently stretch the cushion, inserting the cushion ring into the ear cup slot, and working your way around. Rotate until the L or R indicator is in the correct position.Was this helpful? Thank you for your feedback!
-
Talk Thru technology allows you to clearly hear others for quick conversations without removing your UA Train headphones. To activate TalkThru mode, press the UA logo on the RIGHT ear for 1 second. You will hear your music level lower when TalkThru Technology is engaged. To revert back to normal volume, simply press the UA logo again. (Please note TalkThru does not function when using cable connection.)Was this helpful? Thank you for your feedback!
-
To activate the voice assistance, press and hold the center button on the RIGHT ear for 2 seconds until you hear your music stop. You will be able to speak to VA through your headphones and it should comply with your command.
Was this helpful? Thank you for your feedback! -
This unit is IPX7 rated, which means that you can submerge the unit in water as deep as 3 feet (1 meter) for up to 30 minutes.
Was this helpful? Thank you for your feedback! -
WAVE/VIBE BEAM 2
Software Update Release Notes
------------------------------------------------------------------------
Version: 3.9.0
Release Date: April 8th, 2025
Release Media: OTA (over the air) Automatic Update through JBL Headphone App
What’s New
- Fixed BT disconnect issue with mobile devices with specific characters in BT name
Was this helpful? Thank you for your feedback! -
Your JBL Quantum 100 includes the headset, a detachable microphone, QSG l Warranty Card l Warning Card, and a microphone windshield.Was this helpful? Thank you for your feedback!
-
Your JBL Quantum 200 includes the headset, a PC audio splitter, QSG l Warranty Card l Warning Card, and a microphone windshield.
Was this helpful? Thank you for your feedback! -
These are bass tuning canals, used to provide full sound.Was this helpful? Thank you for your feedback!
-
The Endurance Dive supports SBC. But the main signal transfer is A2DP, v1.3.Was this helpful? Thank you for your feedback!
-
It is possible to rename the Bluetooth name of the primary connected device and set the Party or Stereo mode. If a firmware upgrade is available for any Connect, Connect+, or Partyboost compatible speaker, this can be installed through the JBL Portable app. Only identical products can be set to stereo mode. Please note that, even though you can pair a Boost TV with JBL Connect, you cannot control this from the JBL Connect AppWas this helpful? Thank you for your feedback!
-
You can adjust equalizer, RGB LED effects, change microphone settings and update the headset's firmware.Was this helpful? Thank you for your feedback!
-
Power button, no light: Product is OFF. Power button, constant light: Product is ON. Power button: constant white, when no Bluetooth device connected. Power button, flashing blue in Bluetooth pairing mode. Power button, constant blue light: Bluetooth connected. Battery indicator LEDs: Five LEDs show battery level. When charging, the blinking LED shows how far charging has progressed. When fully charged, the LED lights will turn off. JBL Connect button flashes white in connection mode. When connected: constant light.Was this helpful? Thank you for your feedback!
-
You can adjust equalizer, RGB LED effects, calibrate Quantum ONE headtracking, change microphone settings and update the headset's firmware.Was this helpful? Thank you for your feedback!
-
All speakers are set to react when you use the keywords to interact with Google. To eliminate multiple speakers talking at the same time, using the "Microphone Mute" button will stop the speaker from reacting to the keywords.Was this helpful? Thank you for your feedback!
-
JBL Connect+ can wirelessly link more than 100 JBL Connect+ enabled speakers together to amplify the partyWas this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
To speak to our customer service specialist
1800-102-0525
Mon - Sun: 10:00 am - 7:00 pm (IST)
WhatsApp Us
Chat with a support agent via Whatsapp at:
by clicking https://bit.ly/2SfFSPh or send hi to 91 70658 44446
Mon - Sun: 10:00 am - 7:00 pm (IST)