How To

Support Overview / How To

How To

254 results
  • How to Reset to Factory Settings

    Resetting the Partybox to Factory Settings

    1. Press and hold "Play/Pause" and "Volume +" down for > 10 seconds.
    2. The JBL Partybox will power off and back on and is now reset.
  • How to reset Tune 500/600 BT Headphone
    In order to reset the headphones: 

    Long Press of volume + and volume - at the same time while the unit is on. Make sure that bluetooth is NOT on and connected to any device. 
    When reseting, LED will blink faster. 
  • How to set up your device with Android or iOS
    1. Power on your JBL LINK speaker.
    2. Verify that you are connected to the right Wi-Fi network on your smartphone.
    3. Open your Google Home app Google Home app.
    4. Enable Bluetooth BT ICON
    5. Enable Location Service location icon(Android Only)
      1. Make sure you have permitted the Google Home app to view your location.
    6. First option NEXT oPTTap Addaddd Next topSet up device Setup device NEXT opSet up new devices in your home home icon
    7. Second  option NEXT NEXTTap Disocvery Next topX device found Setup ICON deviceNEXT opSelect Home locationhome icon
    8. Follow the instruction on screen to add your new JBL LINK speaker.

    You are now all set and can enjoy your LINK device!
  • How to set up your microphone

    Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.
    FLIP DOWN.png


    How to check your PC settings for the correct recording device
    1. Go to Control Panel
    Control panel.png
    2. Select Hardware and Sound
    Step 2.PNG
    3. Click on Sound
    Step 3.PNG
    3 Select  Recording
    Recording tap.jpg

    4. Make sure to select the proper recording device.

    1. Right-click on it Quantum headset.

      Set default communication device.jpg

    2. Now select "Set Default Device" or Select "Default Communication Device"

      Set default communication device 2.jpg

    5. Check the microphone levels by right-click on your Quantum headset. Then click on Properties
    Properties.jpg

    6. Choose Levels.
    Levels 1.jpg

    7. Adjust accordingly.
    Levels 2.jpg  

    Please also make sure the volume control on the headset is turned up. Rotate the volume wheel on your headset to increase the volume.
    Check that your headset's Game-Chat balance dial and ensure that the balance is correct, you might refer to the screenshot below from the QuantumEngine PC software.
    Volume issue Q800 - Part3.png

    If you still cannot hear the game or music audio, or if the volume is still very low, check if the TalkThrough is activated via the QuantumEngine software.
    Volume issue Q800 - Part4.png

    Finally, you can also do a short press on the Smart Ambient button on the headset (if your headset, has this feature)
    Volume issue Q800 - Part5.png

  • How to set up your microphone
    Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.

    Check that the PC is using the correct recording device.

    1. Go to Control Panel

    2. Select  Sound 

    3 Select  Recording

    4. Make sure to select the proper recording device.
    1. Right-click on it Quantum headset.
    2. Now select "Set Default Device" or "Select Default Communication Device"
    5. Check the microphone levels by right-click on your Quantum headset.

    6. Go to Properties

    7. Chose Levels and adjust accordingly
  • How to set up your microphone
    Ensure that only one voice chat application is in use while in-game. Be sure you hear a click when the microphone is flipped down. The microphone will only function when it is flipped down fully. If you see a red LED on the microphone, it is muted.

    Check that the PC is using the correct recording device.

    1. Go to Control Panel

    2. Select  Sound 

    3 Select  Recording

    4. Make sure to select the proper recording device.
    1. Right-click on it Quantum headset.
    2. Now select "Set Default Device" or "Select Default Communication Device"
    5. Check the microphone levels by right-click on your Quantum headset.

    6. Go to Properties

    7. Choose Levels and adjust accordingly
  • How to show the current software version
    To show the current firmware version on your JBL TUNER device, go through the following steps.
    1. Turn on the JBL TUNER.
    2. Press and hold this three-button combination: DAB/FM+ Volume+ and Preset 5, simultaneously for 3-4 seconds.
    3. In the display, you will see a combination of letters and numbers. This is the current software version.
    4. See picture below as illustration.
    Tuner Software

    The new firmware version released is V.0.0.57 (shown in the picture above).
    To get the latest version, ask our customer service for a guide and an upgrade file.

     
  • How to switch between Active Noise Cancelling and TalkThru
    Onboard Active Noise Cancelling is controlled by the multi-function button on the rear of the left ear-cup. Switched on by default, you can SINGLE press the ANC button to toggle it On/Off  and LONG press to active TalkThru. Turn on ANC again by a single press on the multi-function button.
  • How to use Google Assistant with a smart speaker
    This video shows how to use a smart speaker that has Google Assistant built-in.
    Our LINK series have Google Assistant built-in therefore you can practice your voice commands together with Harman/Kardon Citation or JBL LINK products

  • How to use your Quantum wirelessly
    It is offering low-latency wireless connectivity via a 2.4Ghz signal that is enabled by a USB dongle included in the box. Turn on the slider, then it automatically connect to the dongle. If you loss the connectivity with the dongle, power on with the slider and hold on for 5 seconds and press and hold the dongle to make sure the pairing until listening to the tone.
  • I am not able to connect JBL DRG to my head unit via Bluetooth.
    JBL DRG will auto reconnect to the last device. To setup a connection with new Bluetooth head unit, press the “reset” button in the App. The device will then search for a discoverable Bluetooth connection and setup.
  • I am not able to upgrade the firmware on JBL DRG with Apps.
    Please keep the app running during a firmware upgrade. This is because the app is using BLE to transfer firmware to the JBL DRG. If you exit or kill the app, this will cause the BLE connection to be broken and the upgrade will not complete.
  • I cannot activate Google Assistant when touching the dedicated button, why?
    It sounds like you are living in a country where Google Assistant has not yet been officially released. When Google releases the Google Assistant to more countries, the Everest GA headphones will open up for this feature. It may require a software update for this to happen. For now, you can use them as normal Bluetooth headphones and wait for the release to use the Google Assistant feature.
  • I have connected JBL DRG to my smartphone before, but after power on, it won’t connect to my smartphone automatically.
    • Please check whether you connected JBL DRG with your smartphone and head unit via Bluetooth before, then power off the head unit. • If you have, wait 2 minutes for JBL DRG to reconnect to smartphone after power on. This is because JBL DRG will automatically search for the head unit, first then the smart phone.
  • I have connected the BTA 20 transmitter to my TV with the digital optical connection, but I get no sound on my Soundgear. How come?
    Please make sure that the audio out format is set to PCM in the TV. Dolby Digital or other surround formats will not work with the BTA 20 transmitter.
  • Is it possible to adjust light intensity on the display or the back panel ring lamp?
    The lights cannot be adjusted by user. The digital front panel display has automatic light intensity adjustment, which follows the level of light in the room.
  • Is it possible to listen to music on TUNE600BTnc while charging it?
    Yes, but only via cable, and noise cancelling cannot be activated meanwhile. Since the charging socket is located on top of the ear pod, adjustment is limited in that direction while the micro-USB plug is inserted.
  • Is my Partybox Supported by the JBL Partybox App?
    This model is not supported by the JBL Partybox App.
  • Is the Game-Chat balance dial compatible with all platforms?
    No, it is compatible with PC and Mac, but not with PS4, XBOX One, Nintendo Switch or Mobile.
  • Is the JBL Soundgear collar flexible?
    Yes, two flexible joints permit you to expand the collar to make it easier to place it around your neck.
  • Is the Live 200BT waterproof?
    No. The Live 200BT does not feature any IPX rating so overexposure to both sweat and water can compromise the headphones.
  • Is there a firmware update for the Authentics L8 / L16 as shown in JBL Music App v.3.0?
    With the release of v.3.0 of the JBL Music app, owners of the JBL Authentics L8 and L16 are now greeted with a message that an update is available. If you own one of these speaker systems, and you know that it already supports Spotify Connect, the update firmware is already installed, and you can ignore this message. If your speaker system does not already support Spotify Connect, the update is available for you, but you cannot perform it yourself, it must go to a service center to be updated. Please contact Harman Helpdesk or the distributor in your country for advice regarding servicing.
  • Is there an app for the EVEREST Bluetooth models that are not one of the ELITE models with ANC?
    No, the app works with the ELITE models only. These are the ones that feature Active Noise Cancelling.
  • Is there a remote control on the cable that comes with JBL C45BT?
    No, this cable is straight, with no remote control. The headphones have remote control buttons on the ear pods, which can be used when listening over Bluetooth wireless.
  • Is there a remote control on the cable that comes with JBL E45BT?
    Yes, the cable has a one-button remote control and a microphone. This means that you can pause, resume play, you can pick up the phone and stop a call, and talk to other people through the microphone. There is no option to control music volume on the cable remote. That is only possible when using the Bluetooth system for wireless listening, with the volume buttons on the ear pod.
  • Is there a Wi-Fi signal indicator on JBL Control Xstream?
    There is a Wi-Fi indicator on the back of the main speaker, and when it turns amber, it indicates that the Wi-Fi signal is weak. Try to move the speaker closer to your Wi-Fi router, and when the signal indicator turns White again, then it has a steady connection.
  • Is the Tune600BTNC water-proof?
    No. The 600BTNC headphone does not feature any IPX rating that protects it against sweat or water. Over exposure to water can compromise the controls on the headphones.
  • Is the Xtreme 2 waterproof?
    Yes, the Xtreme 2 features an IPX 7 rating. IPX7 is defined as the speaker can be immersed in water up to 1 meter for up to 30 minutes.
  • Is Volume Control Supported?
    This headphone does not feature volume control. You must manually control volume from your device.
  • JBL DRG doesn’t generate engine sound in my car.
    Please check with your car manufacturer to ensure your car supports CAN or K-line. JBL DRG only works with CAN and K-line to get the engine data for engine sound simulation. If your car does support CAN or K-line, please launch the JBL DRG app and check the engine sound volume bar (the right column with button marked with “E”) in the “Sound Mode” section to make sure it is not turned off.
< 1 ... 3 4 5 6 7 ... 9 >

Can’t find what you’re looking for?

Call Us

Call Us

To speak to our customer service specialist

1800-102-0525

Mon - Sun: 10:00 am - 7:00 pm (IST)

E-mail Us

E-mail Us

Email our customer service team
365 days, we will reply within 24 hours

Email us
message

WhatsApp Us

Chat with a support agent via Whatsapp at:
by clicking https://bit.ly/2SfFSPh or send hi to 91 70658 44446 

Mon - Sun: 10:00 am - 7:00 pm (IST)