How To
How To
-
Getting started with the checklist
- A JBL LINK device(s).
- Latest version of the Google Home app
installed on your mobile device.
- Latest version of the Google app
(Android only) installed on your mobile device.
- A Google Account (you can create one online via Google).
- A mobile device with either iOS or Android support.
- Must have iOS 10 or higher
- Must have Android 5.0 and higher
- There is no support for PC set up.
- An internet connection from your local ISP (Internet Service Provider).
- Your Wireless Network must secured with WPA2 Encryption (Enterprise mode NOT supported).
- Availability and performance of certain features, services and applications are device- and network-dependent and may not be available in all areas; subscription(s) may be required, and additional terms, conditions and/or charges may apply.
Wi-Fi requirement
- Wi-Fi routers must have Encryption enabled to install JBL LINK speakers (WPA2 etc).
- Wi-Fi Extenders need to feature support of Multicast forwarding and UPnP.
- Always use 5 GHz Wi-Fi for best performance and less interference.
- For routers that have 2.4G Wi-Fi support only, make sure that they are using channels 1, 6 or 11 only.
Was this helpful? Thank you for your feedback! -
Make sure both headphones are fully charged to ensure that the issue is not due to one of the earbuds lacking power.
Check that the contact points on the headphones and the charging case are clear of dirt, so the issue is not due to the product not being able to charge.
The LED on the headphones will show a blue light when correctly inserted in the charging case.
Try to reset the headphones if the product is fully charged but are still only working in Mono mode.
A reset guide for the headphones can be found here: Reset guide
Was this helpful? Thank you for your feedback! -
If your teammates can not hear you, make sure of the following:
USB is correctly plugged in
Only one voice chat application is in use while in-game.
The mic input is set to JBL Quantum Stream.
Mic gain is not turned all the way down
Mic is not muted (mute/unmute by pressing the touch panel on top of the mic). By default the RBG will indicate red for muted, and green for unmuted(active).Was this helpful? Thank you for your feedback! -
If you are not able to turn Spatial Audio on and the option is greyed out on the JBL Smart Tx, then you need to do the following.
- Open the JBL Headphones app
- Disable High-Resolution Audio (LDAC)
- The headphones will turn off and reboot
- You can enable Spatial Audio after the reboot
Was this helpful? Thank you for your feedback! -
The JBL Quantum ONE headset is compatible via 3.5mm jack with PC, PlayStation, Xbox, Nintendo Switch, Mobile, Mac and VR. You can use the USB connection with PC.Was this helpful? Thank you for your feedback!
-
The JBL Quantum Stream mic is compatible with the following platforms:
PC (Windows)
PlayStation 4
PlayStation 5
Nintendo Switch
Mobile*
Mac
* Most newer phones are compatible.Was this helpful? Thank you for your feedback! -
The ear cushions are made of protein leather.Was this helpful? Thank you for your feedback!
-
The Smart Case only supports English, so even if you change the language in the JBL Headphones app, it will remain in English.
Was this helpful? Thank you for your feedback! -
Only data to make Google Assistant more efficient and Google services faster. When interacting with the speaker you will receive more personalized feedback in the future.Was this helpful? Thank you for your feedback!
-
The JBL Quantum Stream microphone is compatible with the JBL QuantumENGINE software. You can customize or use the following settings/features via the JBL QuantumENGINE:
Microphone settings
Polar patters (Cardioid / Onnidirectional)
Equalizer
RGB LED Light colors + animations/effects
Update firmware + softwareWas this helpful? Thank you for your feedback! -
Windows Sonic is a virtual surround algorithm that is built into Windows 10 PCs. You can read more here:
https://docs.microsoft.com/en-us/windows/win32/coreaudio/spatial-soundWas this helpful? Thank you for your feedback! -
Now, with Google Assistant and Alexa available simultaneously on your JBL Authentics speakers, you can choose to use one or both voice services available. This means you can set up just Alexa, just Google Assistant, or both. If you choose to set up both services, they will be at the ready. You can use either of them whenever you want simply by saying either “Hey Google” or “Alexa”.
Was this helpful? Thank you for your feedback!
Can’t find what you’re looking for?
Call Us
To speak to our customer service specialist
1800-102-0525
Mon - Sun: 10:00 am - 7:00 pm (IST)
