How To

Support Overview / How To

How To

264 results
  • UA Pivot Headphones: Call Information
    To receive a call, press the power/pairing button on the controller for 1 second.
  • UA Pivot Headphones: AptX Support Information
    The UA Pivot headphones do not support AptX™ and AptX HD™ audio codecs.
  • UA Pivot Headphones: Ambient Aware Technology Information
    AmbientAware Technology allows you to hear your surroundings without removing your UA Pivot headphones. To activate AmbientAware mode, double press the Bionic Hearing button on the controller. You will hear a tone, and your music level will lower when AmbientAware Technology is engaged. To revert back to normal volume, simply double press the Bionic Hearing button again.
  • UA Flash: Voice Assistant
    To activate Voice Assistant, press and hold the LEFT ear for 5 seconds until music stops and voice assistance asks what they can help you with
  • UA Flash: Reset Procedure
    To reset, Long press the (Right) button for 2s when the earbuds in the case, the blue LED will flash once to indicate reset is done.
  • UA Flash: Power On and Pair Information
    To power on and pair the UA Flash, remove the ear tips from the charging case. If this is your first time using the headphones, they will automatically go into pairing mode. You will see the blue and red LED light flash on the RIGHT ear as it attempts to pair with your device. Make sure your device is in range and BT settings are ON. The JBL True Wireless Flash should pop up on your list of discoverable devices within 3-5 seconds, and connect. Once connected, you will see a slow blinking blue light below the UA logo on the RIGHT Ear. The RIGHT ear must be connected first in order to power on and connect the LEFT ear. To connect the LEFT ear, simply press and hold on the UA logo for 3-5 seconds until you hear the audible power on chime. (The left should automatically power on when you remove it from the case) Once powered on, it should connect to your device within a few seconds displaying a slow blinking blue LED light below the UA logo.
  • UA Flash: Pairing to a different device
    To connect to a new device, begin with the headphones powered off and hold the center button on the RIGHT headphone for 5 seconds to enter pairing mode. You will hear the BT pairing audible chime as it searches for a different device. Make sure the device you are wanting to connect to is in range and BT is on. Once connected you will hear the audible Connected chime. Once Right ear is connected, press and hold the center button on LEFT ear for 3 seconds as it powers on and connects to the device followed by the same Connected audible chime.
  • UA Flash: Controlling Music
    To pause/play music, press center button on RIGHT ear for 1 second. To skip tracks forward, DOUBLE CLICK the center button on RIGHT ear. Unfortunately, you cannot skip tracks backward.
  • UA Flash: Charging Information
    To charge the UA Flash, place inside charging case. While charging, both LEFT and RIGHT ear bud will display a sold red light. Once the headphones are fully charged. The red light will turn OFF. When the charging case is fully charged, the white LED's will light up accordingly: 0= 0% Dead 2-3 = 40%-50% 4=100% Full battery life
  • UA Flash: Call Information
    To take a phone call, press the center button of the RIGHT ear for 1 second. To hang up a call, press and hold the center button on the RIGHT ear for 1 second. To ignore a call, press and hold center button for 3 seconds until music resumes.
  • UA Flash: AptX Support Information
    The UA Flash does not support AptX or AAC audio codecs
  • UA Flash: Ambient Aware Technology
    To activate Ambient Aware DOUBLE CLICK the center button located on the LEFT ear. You should hear the music level drop. To resume to normal music level, DOUBLE CLICK the center button on LEFT ear again.
  • Track Control Information
    To skip tracks forward, double click the PAUSE/PLAY to advance to the next track. Please note: You can only skip tracks forward. This speaker does not have the capability to skip to the previous track.
  • Track Control
    To pause/play music, tap center button on right or left ear for 1 second. To skip tracks forward, DOUBLE CLICK the center button on right or left ear. Unfortunately, you cannot skip tracks backward.
  • The audio is not centered to my monitor, what should I do?
    If the audio is not centered to your monitor, then you can re-center your headset by doing the following: 1. Position yourself in front of your monitor. 2. Press the re-centering button on the side of your headset (button that looks like a circle) 3. The head-tracking sensor will start the automatic calibration.
  • TalkThru Technology
    To activate TalkThru Technology, press the LEFT ear for a short press for 1 Second which allows you to clearly hear others for quick conversations without removing headphons. Music volume level should lower when TalkThru is engaged. Press again for 1 second to turn off Talk Thru.
  • Switching or Changing to a new Wireless Network

    Switching to a new Wi-Fi network

    1. Make sure your mobile device is connected to the same Wireless Network as your speaker.
    2. Open your Google Home app Google Home app
    3. Go to Settings Settings
    4. Tap on Wi-FI nextForget Network
      1. The current configuration is now forgotten.
    5. In your Google Home app, you are forced back to the "Home Screen" and need to setup the device again.
    6. Tap on House
    7. Find Add Add devcenext  Set up device next Set up new devices in your home
    8. Follow the instructions given to add the speaker to your Wi-Fi network.

    Lost connection or changed settings

    1. Open the Google Home app Google Home app
    2. On the home screen, tap on AddAdd devcenextSet up device next Set up new devices in your home
    3. Follow the instruction provided.
      1. Remember that your current room name is the same as before, as well as other settings made for the speaker. You are only switching to a new Wi-Fi.
    4. In addition, you can click on Discovery discover icon in the bottom menu of the Google Home app.
    5. Tap on the Setup new setup icon nextThe Card information would show your old speaker name.  However, you can continue setting up the device following the instructions.
     

     

  • Supported Platforms

    The JBL Quantum 300 headset is compatible with PC, PlayStation, Xbox, Nintendo Switch, Mobile, Mac and VR.
    You can also use the included USB dongle on PC, PlayStation and Mac.

  • Supported Platforms

    The JBL Quantum 400 headset is compatible via 3.5mm jack with PC, PlayStation, Xbox, Nintendo Switch, Mobile, Mac and VR.
    You can use the USB connection with PC, PS4, Nintendo Switch, and Mac.

  • Soundgear: how to reset
    Switch the Soundgear ON. (If this is not possible, reset cannot be performed.)
    Press and hold Volume + and Volume - simultaneously for longer than five seconds.
    Soundgear switches OFF, and is now reset to factory settings.
  • Sometimes, I am not able to connect JBL DRG with my smartphone.
    Please check that you have connected your android phone with JBL DRG before. Power off your Android phone and press the JBL DRG BT button to connect to another smartphone. If this is the case, please wait 3 minutes for JBL DRG to setup the Bluetooth connection with a new smartphone. This is because some android phones can’t send a “Disconnect” BT command to JBL DRG during power off, so JBL DRG need to wait until the Link is lost.
  • Singing while playing Bluetooth music
    You can have your own Karaoke party with your JBL Partybox. Simply connect your Microphone (only included with the Partybox On The Go) and connect your mobile device over Bluetooth, then start playing music and sing along, it is that simple!
  • Reset Information
    To reset the headphones, power on the headphones and plug in the USB cable into a USB charger or USB port. Paired mobile devices should disconnect and the led should be constant white. When unplugging the USB cable, the headphones will power off. When manually powering on the headphones, and the last connected mobile phone is not in range, the headphones will revert to Bluetooth Pairing mode ( blue led will blink ) after 5 seconds.
  • Reflect Mini 2: Pairing Information
    To connect to a different Bluetooth device, first switch the headphones off. Now press and hold the center button on the headphone remote control for about 3-5 seconds. You should see the light blinking red/blue to indicate pairing mode, and the voice prompt should state “looking for device”. You should see "Reflect Mini 2" appear on the source's BT list. Choose that option, and wait for the voice prompt to state “connected”
  • QUANTUM 910: Software Update Release Notes

    QUANTUM 910

    Software Update Release Notes

    ------------------------------------------------------------------------

    Version:  3.3.0

    Release Date: April 9th, 2025

    Release Media: OTA (over the air) Update via JBL Quantum Engine

     

    What’s New

    1. Stability and performance improvement


  • Pulse 5 - Factory Reset

    Press and hold the Light Show & Bluetooth buttons together for > 2 seconds.

  • Power and Pairing Information
    Locate the power button on the back of the right ear cup. Gently slide the spring loaded power button up and release. Once turned on, it will display a solid white light. If this is your first time powering on the device it should automatically go into pairing mode, and will display a fast blinking blue light. Make sure the device you are attempting to connect to is in search mode. The headphones should pop up on your list of discoverable devices within 3-5 seconds, and connect. If you are attempting to pair to a different device, make sure headphones are turned on, and press and hold the Bluetooth button located at the bottom of the right ear cup. The headphone should display on your new device within 3-5 seconds on your list of discoverable devices.
  • Platforms we support

    The JBL Quantum 200 is compatible with PC, PlayStation, Xbox, Nintendo Switch, Mobile, Mac and VR.

  • Platforms that we support

    The JBL Quantum 100 is compatible with PC, PlayStation, Xbox, Nintendo Switch, Mobile, Mac and VR.

  • PARTYBOX ULTIMATE: Software Update Release Notes

    PARTYBOX ULTIMATE

    Software Update Release Notes

    ------------------------------------------------------------------------

    Version:  24.15.37.70.00

    Release Date: April 17, 2024

    Release Media: OTA (over the air) Automatic Update

     

    What’s New

    1. Stability & performance improvement

    ------------------------------------------------------------------------

    Version:  23.50.23.70.00

    Release Date: December 29, 2023

    Release Media: OTA (over the air) Automatic Update

     

    What’s New

    1. Fixed microphone distortion issue when being used in Daisy Chain Mode
    2. Software Update optimized
< 1 2 3 4 5 6 ... 9 >

Can’t find what you’re looking for?

Call Us

Call Us

To speak to our customer service specialist

1800-102-0525

Mon - Sun: 10:00 am - 7:00 pm (IST)

E-mail Us

E-mail Us

Email our customer service team
365 days, we will reply within 24 hours

Email us
message

WhatsApp Us

Chat with a support agent via Whatsapp at:
by clicking https://bit.ly/2SfFSPh or send hi to 91 70658 44446 

Mon - Sun: 10:00 am - 7:00 pm (IST)